- Início
- Mercedes-Benz
- Sprinter
- 2018
Mercedes-Benz Sprinter 2018
O 2018 Mercedes-Benz Sprinter tem um motor de 2.2 L. 5 campanhas de recall estão registradas.
Especificações
| Cilindros | 4 |
|---|---|
| Comprimento | 6,330 mm (249.2 in) |
| Largura | 2,000 mm |
| Peso bruto | 2,750 kg (6,063 lb) |
| Assentos | 7 |
Especificações: média dos carros deste modelo registrados pela primeira vez em 2018 na Holanda (registro de veículos RDW).
À venda em Estados Unidos
Chamadas de retorno
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Detalhes
Issue: On certain vehicles, the power steering return hoses may detach at their connection points. If this happens, power steering fluid can leak. This would result in a loss of power steering assist and power steering fluid could leak onto the road. Note: This is an expansion of Mercedes-Benz Recall 4695079 (Transport Canada Recall No. 2020-517). Safety Risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low speeds. This could increase the risk of a crash. A power steering fluid leak could create a road hazard. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to check the power steering return hose connections. Dealers will install a clamp at the connection point, if needed.
Detalhes
Issue: On certain recreational vehicles (RVs) and camper van conversions, moisture could cause a rear wheel speed sensor to fail. If this happens, the Electronic Stability Program (ESP) control unit may not work properly. Note: A malfunction of the ESP control unit can cause the ESP or ABS warning lights to turn on, and a "workshop assistance" message could appear in the instrument cluster. Safety Risk: A stability control system that does not work properly could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rear wheel speed sensors with an improved part.
Detalhes
This recall was replaced by Transport Canada Recall No. 2021-216. Issue: On certain vehicles, the power steering return hoses may detach at their connection points. If this happens, power steering fluid can leak. This would result in a loss of power steering assist and power steering fluid could leak onto the road. Safety Risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low speeds. This could increase the risk of a crash. A power steering fluid leak could create a road hazard. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to check the power steering return hose connections. Dealers will install a clamp at the connection point, if needed.
Detalhes
Issue: On certain cargo vans, an additional bench seat may have been installed incorrectly. In specific, the seat may not be properly attached and may not have protection from corrosion. Over time, this could cause the seat to loosen and detach. Note: This recall only affects vans that were sold by Mercedes-Benz Mississauga, and up-fitted by Total Autoglass. Safety Risk: A seat that is loose or detaches could increase the risk of injury in a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect your van. The vehicle will be repaired as necessary. Mercedes-Benz advises that these bench seats should not be used until an inspection is completed.
Detalhes
Issue: On certain vans, the upper hood latch may not be properly installed. Under some driving conditions, this could allow the hood to open suddenly while driving. Safety Risk: If the hood opens while driving, it could suddenly block a driver's view. This could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct them to take their van to a dealer to inspect, and if necessary, tighten the mounting screws for the upper hood latch. Any missing screws will be replaced.
Traduzido automaticamente do texto em holandês do RDW. O original está na fonte.
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Consequência · Solução
The fuse holder for the interior fan may not be properly mounted. Under certain conditions, this could lead to heat development in the area of the fuse holder, potentially causing a fire in the vehicle.
The vehicle owner is requested to make an appointment with a brand dealer. The fuse holder and the wiring will be replaced.
Consequência · Solução
A component of the parking lock system of the automatic transmission may wear unusually and hinder the safe parking of the vehicle. If the driver does not apply the handbrake while parking the vehicle (against the user manual), the vehicle may roll away, posing a risk of an accident.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the software of various control units (e.g. ESP and transmission control unit).
Consequência · Solução
A component of the parking lock system of the automatic transmission may wear unusually and impede the safe parking of the vehicle. If the driver does not engage the handbrake when parking the vehicle (contrary to the owner's manual), the vehicle may roll away, posing a risk of an accident.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the software of various control units (e.g., ESP and shift unit).
Consequência · Solução
The rearview camera may have a fault causing no image to be displayed after engaging reverse gear. This obstructs the view to the rear, increasing the risk of an accident.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the software of the rearview camera.
Consequência · Solução
Under certain climatic conditions, a chemical change may occur over time in the gas of the gas generator of certain Takata airbags. In an accident where the airbag is activated, this change could cause the gas generator to rupture due to increased internal pressure. In that case, the airbag would not provide protection, and occupants could suffer injuries from parts of the gas generator detaching.
The vehicle owner is requested to make an appointment with an authorized dealer. They will replace the driver's airbag.
Consequência · Solução
Due to a temporary voltage drop in the electrical system, the emergency call system may possibly send the wrong location of the vehicle. If the wrong location is sent during an emergency call, it may delay the arrival of emergency services.
The vehicle owner is requested to make an appointment with a brand dealer. They will perform a software update to upgrade the Hermes control unit.
Consequência · Solução
The parking lock may not function properly. If the parking brake is not used, the parked vehicle may roll away.
The vehicle owner is requested to make an appointment with a brand dealer. The software of the control unit of the electronic stability program (ESP(R)) will be adjusted.
Consequência · Solução
Cracks may develop in the crossmember of the towbar. Cracks in the crossmember can lead to the crossmember failing, and in extreme cases, the trailer coupling may break off.
The vehicle owner is requested to make an appointment with a brand dealer. They will check the crossmember of the towbar and replace it if necessary.
Consequência · Solução
The connection point of the return line of the hydraulic power steering may not be properly secured, which can cause the power steering to fail. Under certain operating conditions, the line may detach from the hydraulic power steering, resulting in loss of power steering.
The vehicle owner is requested to make an appointment with an authorized dealer. They will check the connections of the hydraulic lines for the power steering and secure them again with a hose clamp if necessary.
Consequência · Solução
The brake hose on the front axle may come into contact with the inner lining of the wheel arch and begin to rub. The rubbing spots on the brake hoses may wear through over time, potentially leading to a loss of brake fluid and, in the worst case, a loss of braking power.
The vehicle owner is requested to make an appointment with a brand dealer. They will replace the brake hose with a new version on the front axle.
Consequência · Solução
The bolt on which the brake pedal pivots may not be sufficiently secured and could possibly come loose when the foot brake is operated. If the bolt comes loose, the brake pedal will feel different and take on another position, causing the brake lights to possibly stay on continuously. The braking function remains intact.
The vehicle owner is requested to make an appointment with an authorized dealer. The dealer will check the securing of the bolt in the brake pedal pivot point and renew it if necessary.
Consequência · Solução
Over time, air may enter the brake system through the brake calipers on the rear axle. Air in the brake system results in a changed brake pedal feel, a longer brake pedal stroke, and reduced braking performance.
The vehicle owner is requested to make an appointment with a brand dealer. They will check the brake fluid level, replace the brake calipers on the rear axle, and update the software version of the ESP control unit.
Consequência · Solução
There may be a malfunction in the gear recognition function in the transmission. The reverse light may only function until the next ignition cycle or the engine is started.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the software responsible for gear recognition.
Consequência · Solução
The electrical wiring harness may get caught between the brake light switch and the brake pedal lever. As a result, the wiring harness may get damaged. The brake light remains permanently on. The ESP is deactivated and the vehicle may roll away.
The vehicle owner is requested to make an appointment with a brand dealer. The cable routing of the wiring harness will then be corrected.
Consequência · Solução
The ball coupling may crack or break due to material fatigue. The ball coupling may possibly disconnect.
The vehicle owner is requested to make an appointment with a brand dealer. The work involves checking the ball coupling and, if necessary, replacing it.
Consequência · Solução
The glow time relay may potentially be damaged in an accident. This may cause a short circuit.
The vehicle owner is requested to make an appointment with a brand dealer. They will install a cover (Crash box) for the glow time end stage and simultaneously equip the power supply to the glow time end stage with a pyrotechnic fuse.
Consequência · Solução
The brake hoses may come into contact with the front wheel inner fenders. The brake hoses of the front wheels may become damaged, leading to loss of brake fluid and braking power.
The mounting position of the fender liners and adjacent components will be checked and adjusted or replaced if necessary. If a brake hose shows signs of wear or damage, we request that you have it replaced.
Consequência · Solução
The leaf springs on the rear axle may break. If the leaf spring breaks, the rear axle fixation is no longer guaranteed, which may lead to loss of control over the vehicle.
The rear axle springs will be checked and replaced if necessary.
Consequência · Solução
A weld seam in the front seat height adjustment may break in the event of an accident, causing the seat to slide forward and down. If the front seats shift due to the weld of the seat height adjustment breaking during an accident, the protective effect of the airbag system may be insufficient.
The frame of the front seats will be replaced.
Consequência · Solução
The bolts securing the hood latch to the hood may not have been tightened properly. As a result, the latch may come loose. The hood may open while driving.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will check the fastening and repair it if necessary.
Consequência · Solução
The wiring and fuse holder of the air suspension compressor are insufficiently resistant to electrical loads. Thermal overload may occur.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will remove the fuse holder and install thicker wiring.
Consequência · Solução
The high beam may not be switched off when set to automatic and the camera system is being disturbed. This can blind oncoming traffic.
The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the relevant software.
Consequência · Solução
A centering sleeve between the automatic transmission and the control module may not be installed. As a result, water can enter the module and cause a malfunction. Inability to operate the transmission.
The vehicle owner is requested to make an appointment with a brand dealer. They will check if the centering sleeve is present. If absent, the control module will be replaced. The software of the module will be further updated.
Consequência · Solução
The cover plate on the sliding door stop is missing. When the door is fully open or when working in the vehicle, the sharp plate part is exposed, and the risk of injury is not excluded.
The vehicle owner is requested to make an appointment with a brand dealer. They will check if the cover plate is present and will install it afterward if absent.
Consequência · Solução
The jack support points are not properly described in the digital manual. By placing the jack on points not intended for this purpose, the vehicle can slip off the jack.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the digital operating manual.
Consequência · Solução
It is possible that an incorrect control lever has been installed on the electronically unlocked door locks. This may prevent the passenger door, the cargo area sliding door, and the right rear door from opening both inside and outside, hindering the escape route through these doors.
The manufacturer will take measures. The vehicle owner is requested to make an appointment with an authorized dealer. They will inspect the vehicle and replace the door locks if necessary.
Consequência · Solução
A wrong operating lever may have been installed on the electronically released door locks. This may prevent the opening of the passenger door, the sliding door of the cargo space, and the right rear door of the vehicle from both the inside and outside, hindering escape routes via these doors.
The manufacturer is taking measures. The vehicle owner is requested to make an appointment with a brand dealer. They will check the vehicle and, if necessary, replace the door locks.
Consequência · Solução
The brake light switch wiring may become pinched between the brake pedal actuator. The brake light stays on permanently. Incorrect information from the brake control can lead to the disabling of various functions and assistance systems, such as the ESP.
The vehicle owner is requested to make an appointment with a brand dealer. They will properly secure the wiring of the brake light switch.
Consequência · Solução
There may be two missing weld points connecting the front and rear longitudinal beams. The cabin may detach or tilt in the event of an accident.
The manufacturer will take action. The vehicle owner is requested to make an appointment with a brand dealer. They will inspect the vehicle and replace the missing welds with a bolted connection if necessary.
Consequência · Solução
An incorrect holder was installed on the corner rotation sensor of the rear axle. As a result, the headlight leveling system does not function correctly. The headlights may be adjusted too high by the automatic leveling system, potentially dazzling oncoming traffic.
The vehicle owner is requested to make an appointment with a brand dealer. They will install the correct holder.
Consequência · Solução
The exit warning of the blind spot assistant may not work after the ignition is turned off. The driver or passenger do not receive a visual or acoustic warning for oncoming traffic when exiting the vehicle.
The manufacturer is taking measures. The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the coding of the front doors.
Consequência · Solução
Due to a software error, the background lighting of the hazard light switch turns off after 20 minutes. Visibility of the switch is limited in the dark. This may make it difficult to find when needed.
The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the software.
Consequência · Solução
Due to a software error, vehicles with blind spot assistance and automatic transmission may disable the exit warning after the ignition is turned off. The driver or passenger will not be visually or acoustically warned about oncoming traffic when leaving the vehicle.
The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the software.
Consequência · Solução
After a collision, the automatic braking system does not function. The vehicle does not come to a stop properly.
The manufacturer will take measures. The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the software.
Consequência · Solução
The front seat frames may be missing rivets at the height adjustment. In the event of a rear impact, the seats may move uncontrollably, providing less protection.
The vehicle owner is requested to make an appointment with a brand dealer. They will inspect the seats and replace them if necessary.
Consequência · Solução
Some spot welds at the hinge attachment on the left and right A-pillar are missing. The absence of these spot welds may negatively impact the crash safety of the vehicle.
The vehicle owner is requested to make an appointment with a brand dealer. They will check the spot welds and apply them if necessary.
Consequência · Solução
The alignment of the front axle is incorrectly set. The tires may become damaged and the driving behavior may be negatively affected.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will adjust the alignment correctly.
Na estrada
Carros deste modelo registrados pela primeira vez em 2018, a partir de registros oficiais. Cada figura pertence ao seu país.
🇳🇱 Registro de veículos, Holanda
698 ainda registrado
31% com um recall aberto
Preço médio de lista quando novo: 75,904 € (impostos holandeses incluídos) · RDW, CC0
Perguntas
- Qual motor tem o 2018 Mercedes-Benz Sprinter?
- O 2018 Mercedes-Benz Sprinter tem um motor de 2.2 L.
- O 2018 Mercedes-Benz Sprinter tem campanhas de recall?
- 5 campanhas de recall estão registradas. A mais recente envolve Steering (2021-04-09).
Outros anos
Outros modelos da Mercedes-Benz
Você possui um 2018 Sprinter?
Publique-o gratuitamente e alcance compradores que já estão interessados neste carro exato.
- Gratuito, sem comissão
- Cerca de três minutos
- Seu anúncio aparece nesta página