- Início
- Mercedes-Benz
- Sprinter
- 2015
Mercedes-Benz Sprinter 2015
O 2015 Mercedes-Benz Sprinter tem um motor de 2.2 L. 7 campanhas de recall estão registradas.
Especificações
| Cilindros | 4 |
|---|---|
| Comprimento | 6,127 mm (241.2 in) |
| Largura | 1,958 mm |
| Peso bruto | 2,672 kg (5,891 lb) |
| Assentos | 6 |
Especificações: média dos carros deste modelo registrados pela primeira vez em 2015 na Holanda (registro de veículos RDW).
À venda em Estados Unidos
Chamadas de retorno
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Detalhes
Issue: On certain vehicles, the power steering return hoses may detach at their connection points. If this happens, power steering fluid can leak. This would result in a loss of power steering assist and power steering fluid could leak onto the road. Note: This is an expansion of Mercedes-Benz Recall 4695079 (Transport Canada Recall No. 2020-517). Safety Risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low speeds. This could increase the risk of a crash. A power steering fluid leak could create a road hazard. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to check the power steering return hose connections. Dealers will install a clamp at the connection point, if needed.
Detalhes
Issue: On certain recreational vehicles (RVs) and camper van conversions, moisture could cause a rear wheel speed sensor to fail. If this happens, the Electronic Stability Program (ESP) control unit may not work properly. Note: A malfunction of the ESP control unit can cause the ESP or ABS warning lights to turn on, and a "workshop assistance" message could appear in the instrument cluster. Safety Risk: A stability control system that does not work properly could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rear wheel speed sensors with an improved part.
Detalhes
This recall was replaced by Transport Canada Recall No. 2021-216. Issue: On certain vehicles, the power steering return hoses may detach at their connection points. If this happens, power steering fluid can leak. This would result in a loss of power steering assist and power steering fluid could leak onto the road. Safety Risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low speeds. This could increase the risk of a crash. A power steering fluid leak could create a road hazard. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to check the power steering return hose connections. Dealers will install a clamp at the connection point, if needed.
Detalhes
Issue: On certain cargo vans, an additional bench seat may have been installed incorrectly. In specific, the seat may not be properly attached and may not have protection from corrosion. Over time, this could cause the seat to loosen and detach. Note: This recall only affects vans that were sold by Mercedes-Benz Mississauga, and up-fitted by Total Autoglass. Safety Risk: A seat that is loose or detaches could increase the risk of injury in a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect your van. The vehicle will be repaired as necessary. Mercedes-Benz advises that these bench seats should not be used until an inspection is completed.
Detalhes
On certain vehicles, a reinforcement plate and the protective bracket may not have been installed on the airbag control unit. This could cause the airbag control unit to become damaged in the event of a frontal impact. If this occurs, this could prevent the airbag system to work properly in the event of a secondary impact requiring the deployment of additional airbags which could increasing the risk of injury to the occupants. Correction: Dealers will install the reinforcement plate with the protective bracket.
Detalhes
Certain 4x4 vehicles may fail to comply with requirements of CMVSS 301 - Fuel System Integrity. The vehicles were not fitted with a drive shaft catch strap at the time of assembly. In the event of a crash without the additional drive shaft catch strap, the fuel tank could become damaged, allowing a fuel leak to occur. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: Dealers will retrofit the additional drive shaft catch strap.
Detalhes
On certain vehicles equipped with four-cylinder diesel engines, the timing chain tensioner gasket could fail, causing an oil leak. If the vehicle is operated in this condition, this could cause engine failure, which would result in a loss of motive power. Oil leaking onto hot engine surfaces could also increase the risk of a fire. These issues could increase the risk of injury and/or damage to property. Correction: Dealers will replace the timing chain tensioner gasket.
Traduzido automaticamente do texto em holandês do RDW. O original está na fonte.
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Consequência · Solução
Under certain climate conditions, a chemical change may occur in the gas of the gas generator of certain Takata airbags over time. In the event of an accident where the airbag is activated, this change could cause the gas generator to rupture due to increased internal pressure. In that case, the airbag would not provide protection, and the occupants could sustain injuries from debris from the gas generator.
The vehicle owner is requested to make an appointment with a brand dealer. They will replace the driver's airbag.
Consequência · Solução
The gas of the gas generator in the driver's airbag may chemically change. As a result, excessive pressure may occur upon activation, causing parts of the gas generator to detach and fragment. This could injure the occupants.
The vehicle owner is requested to make an appointment with an authorized dealer. They will replace the driver's airbag.
Consequência · Solução
Under certain climatic conditions, a chemical change may occur over time in the gas of the gas generator of certain Takata airbags. In an accident where the airbag is activated, this change could cause the gas generator to rupture due to increased internal pressure. In that case, the airbag would not provide protection, and occupants could suffer injuries from parts of the gas generator detaching.
The vehicle owner is requested to make an appointment with an authorized dealer. They will replace the driver's airbag.
Consequência · Solução
Under certain climatic conditions, a chemical change may occur over time in the gas of the gas generator of certain Takata airbags. In an accident where the airbag is activated, this change could cause the gas generator to rupture due to increased internal pressure. In that case, the airbag would not provide protection, and occupants could suffer injuries from parts of the gas generator detaching.
The vehicle owner is requested to make an appointment with an authorized dealer. They will replace the driver's airbag.
Consequência · Solução
The NOx emissions behavior has increased. The control unit that manages the NOx emissions needs to be adjusted through a software update so that the NOx emission values improve under realistic driving behavior.
The vehicle owner is requested to make an appointment with a brand dealer. This dealer will update the software of the control unit.
Consequência · Solução
The ball coupling may crack or break due to material fatigue. The ball coupling may possibly disconnect.
The vehicle owner is requested to make an appointment with a brand dealer. The work involves checking the ball coupling and, if necessary, replacing it.
Consequência · Solução
The wiring and fuse holder of the air suspension compressor are insufficiently resistant to electrical loads. Thermal overload may occur.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will remove the fuse holder and install thicker wiring.
Consequência · Solução
There is a possibility that 2 of the 4 bolts of the tow ball are not correctly tightened, which can lead to overloading of the remaining bolts. Detachment of the tow ball and loss of the trailer.
The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is requested to make an appointment with a brand dealer. They will replace the tow ball bolts and correct the tightening torque.
Consequência · Solução
Due to an incorrect chemical paint composition, it is not guaranteed that the layers of paint adhere sufficiently to each other. As a result, glued windows may not have sufficient adhesion to the vehicle. Windows may detach in the event of an accident and lead to an increased risk of injury. This adhesion issue may also occur if the vehicle is factory-built with fastening rails and/or a super-high roof.
The manufacturer is recalling the affected vehicles. Measures will be taken to resolve the defect. The vehicle owner is requested to make an appointment with a brand dealer. They will check the paint adhesion of the vehicle and rebuild the paint in the area of the window adhesives, fastening rails, and the super-high roof.
Consequência · Solução
Due to an incorrect chemical paint composition, it is not guaranteed that the color paint layers adhere sufficiently to each other. As a result, glued windows may not have adequate adhesion to the vehicle. Windows can detach in the event of an accident and lead to an increased risk of injury. This adhesion issue can also occur if the vehicle is factory-fitted with retention rails and/or a super-high roof.
The manufacturer is recalling the affected vehicles. Measures will be taken to remedy the defect. The vehicle owner is requested to make an appointment with a brand dealer. The dealer will check the paint adhesion of the vehicle and rebuild the paint in the area of the window adhesives, the retention rails, and the super-high roof.
Consequência · Solução
Due to an incorrect chemical paint composition, it is not ensured that the paint layers adhere sufficiently to one another. As a result, glued windows may not have sufficient adhesion to the vehicle. Windows could detach in the event of an accident, leading to an increased risk of injury. This adhesion problem may also occur if the vehicle is factory-equipped with glued lashing rails or eyes.
The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is requested to make an appointment with a brand dealer. They will check the paint adhesion of the vehicle and properly apply the paint in the area of the window glueings and the lashing rails or eyes.
Consequência · Solução
During production, the high-pressure lines of the fuel system were not produced according to specifications. This may cause cracking in a high-pressure line. Fuel leakage. A fuel leak near an ignition source can lead to a fire. Leaking fuel is also an environmental burden.
The manufacturer is recalling the affected vehicles. Measures will be taken to remedy the defect. The vehicle owner is requested to make an appointment with a brand dealer. They will replace the high-pressure lines of the fuel system.
Consequência · Solução
There is a possibility that the bolts of the seat belts on the B-pillars have not been tightened to the required torque. The fastening bolts may loosen. This increases the risk that the seat belt may not function or may not function correctly.
The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is requested to make an appointment with a brand dealer. They will check the fastening of the bolts and correct it if necessary.
Consequência · Solução
In vehicles with an OM651 engine, the material and/or the size of the sealing ring of the engine chain tensioner is incorrect. As a result, the sealing ring does not seal properly. If the sealing ring does not seal correctly, engine oil leakage may occur. Loss of engine oil can lead to contamination of the roadway and thus create a dangerous situation for other traffic and the environment. Additionally, engine damage may occur.
The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is requested to make an appointment with a brand dealer. This dealer will replace the sealing ring of the chain tensioner.
Na estrada
Carros deste modelo registrados pela primeira vez em 2015, a partir de registros oficiais. Cada figura pertence ao seu país.
🇳🇱 Registro de veículos, Holanda
499 ainda registrado
51% com um recall aberto
Preço médio de lista quando novo: 63,699 € (impostos holandeses incluídos) · RDW, CC0
Perguntas
- Qual motor tem o 2015 Mercedes-Benz Sprinter?
- O 2015 Mercedes-Benz Sprinter tem um motor de 2.2 L.
- O 2015 Mercedes-Benz Sprinter tem campanhas de recall?
- 7 campanhas de recall estão registradas. A mais recente envolve Steering (2021-04-09).
Outros anos
Outros modelos da Mercedes-Benz
Você possui um 2015 Sprinter?
Publique-o gratuitamente e alcance compradores que já estão interessados neste carro exato.
- Gratuito, sem comissão
- Cerca de três minutos
- Seu anúncio aparece nesta página