- Início
- Mercedes-Benz
- Sprinter
- 2014
Mercedes-Benz Sprinter 2014
O 2014 Mercedes-Benz Sprinter tem um motor de 2.2 L. 4 campanhas de recall estão registradas.
Especificações
| Cilindros | 4 |
|---|---|
| Comprimento | 3,297 mm (129.8 in) |
| Largura | 1,164 mm |
| Peso bruto | 2,678 kg (5,904 lb) |
| Assentos | 6 |
Especificações: média dos carros deste modelo registrados pela primeira vez em 2014 na Holanda (registro de veículos RDW).
À venda em Estados Unidos
Chamadas de retorno
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Detalhes
Issue: On certain recreational vehicles (RVs) and camper van conversions, moisture could cause a rear wheel speed sensor to fail. If this happens, the Electronic Stability Program (ESP) control unit may not work properly. Note: A malfunction of the ESP control unit can cause the ESP or ABS warning lights to turn on, and a "workshop assistance" message could appear in the instrument cluster. Safety Risk: A stability control system that does not work properly could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to replace the rear wheel speed sensors with an improved part.
Detalhes
Issue: On certain cargo vans, an additional bench seat may have been installed incorrectly. In specific, the seat may not be properly attached and may not have protection from corrosion. Over time, this could cause the seat to loosen and detach. Note: This recall only affects vans that were sold by Mercedes-Benz Mississauga, and up-fitted by Total Autoglass. Safety Risk: A seat that is loose or detaches could increase the risk of injury in a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect your van. The vehicle will be repaired as necessary. Mercedes-Benz advises that these bench seats should not be used until an inspection is completed.
Detalhes
On certain vehicles, a reinforcement plate and the protective bracket may not have been installed on the airbag control unit. This could cause the airbag control unit to become damaged in the event of a frontal impact. If this occurs, this could prevent the airbag system to work properly in the event of a secondary impact requiring the deployment of additional airbags which could increasing the risk of injury to the occupants. Correction: Dealers will install the reinforcement plate with the protective bracket.
Detalhes
On certain vehicles equipped with four-cylinder diesel engines, the timing chain tensioner gasket could fail, causing an oil leak. If the vehicle is operated in this condition, this could cause engine failure, which would result in a loss of motive power. Oil leaking onto hot engine surfaces could also increase the risk of a fire. These issues could increase the risk of injury and/or damage to property. Correction: Dealers will replace the timing chain tensioner gasket.
Traduzido automaticamente do texto em holandês do RDW. O original está na fonte.
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Consequência · Solução
Under certain climate conditions, a chemical change may occur in the gas of the gas generator of certain Takata airbags over time. In the event of an accident where the airbag is activated, this change could cause the gas generator to rupture due to increased internal pressure. In that case, the airbag would not provide protection, and the occupants could sustain injuries from debris from the gas generator.
The vehicle owner is requested to make an appointment with a brand dealer. They will replace the driver's airbag.
Consequência · Solução
The fuel filter heating may not work, which could lead to fuel gelling at low outside temperatures. The engine may stall and/or go into limp mode.
The vehicle owner is requested to contact the brand dealer. They will carry out a software update.
Consequência · Solução
Under certain climatic conditions, a chemical change may occur over time in the propellant of the gas generator of certain Takata airbags. In an accident where the airbag is activated, this change could cause the gas generator to rupture due to increased internal pressure. In that case, the airbag would not provide protective function, and occupants could sustain injuries from parts of the gas generator becoming detached.
The vehicle owner is requested to make an appointment with a brand dealer. They will replace the driver's airbag.
Consequência · Solução
The gas of the gas generator in the driver's airbag may chemically change. As a result, excessive pressure may occur upon activation, causing parts of the gas generator to detach and fragment. This could injure the occupants.
The vehicle owner is requested to make an appointment with an authorized dealer. They will replace the driver's airbag.
Consequência · Solução
Under certain climatic conditions, a chemical change may occur over time in the gas of the gas generator of certain Takata airbags. In an accident where the airbag is activated, this change could cause the gas generator to rupture due to increased internal pressure. In that case, the airbag would not provide protection, and occupants could suffer injuries from parts of the gas generator detaching.
The vehicle owner is requested to make an appointment with an authorized dealer. They will replace the driver's airbag.
Consequência · Solução
Under certain climatic conditions, a chemical change may occur over time in the gas of the gas generator of certain Takata airbags. In an accident where the airbag is activated, this change could cause the gas generator to rupture due to increased internal pressure. In that case, the airbag would not provide protection, and occupants could suffer injuries from parts of the gas generator detaching.
The vehicle owner is requested to make an appointment with an authorized dealer. They will replace the driver's airbag.
Consequência · Solução
A software update is available for the engine control system. An improvement of the NOx emission output.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will update the software of the control unit.
Consequência · Solução
The NOx emissions behavior has increased. The control unit that manages the NOx emissions needs to be adjusted through a software update so that the NOx emission values improve under realistic driving behavior.
The vehicle owner is requested to make an appointment with a brand dealer. This dealer will update the software of the control unit.
Consequência · Solução
The ball coupling may crack or break due to material fatigue. The ball coupling may possibly disconnect.
The vehicle owner is requested to make an appointment with a brand dealer. The work involves checking the ball coupling and, if necessary, replacing it.
Consequência · Solução
The wiring and fuse holder of the air suspension compressor are insufficiently resistant to electrical loads. Thermal overload may occur.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will remove the fuse holder and install thicker wiring.
Consequência · Solução
In vehicles with an OM651 engine, the material and/or the size of the sealing ring of the engine chain tensioner is incorrect. As a result, the sealing ring does not seal properly. If the sealing ring does not seal correctly, engine oil leakage may occur. Loss of engine oil can lead to contamination of the roadway and thus create a dangerous situation for other traffic and the environment. Additionally, engine damage may occur.
The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is requested to make an appointment with a brand dealer. This dealer will replace the sealing ring of the chain tensioner.
Consequência · Solução
The weld seam of the rear axle support tube may crack. If this weld seam cracks, the construction of the rear axle can become unstable (loosen). There is then a possibility that the driver may lose control of the vehicle.
The manufacturer is recalling the affected vehicles. Measures will be taken to fix the defect. The vehicle owner is requested to make an appointment with a Mercedes-Benz dealer. Two additional mounting brackets will then be installed to strengthen the rear axle support tube.
Na estrada
Carros deste modelo registrados pela primeira vez em 2014, a partir de registros oficiais. Cada figura pertence ao seu país.
🇳🇱 Registro de veículos, Holanda
531 ainda registrado
53% com um recall aberto
Preço médio de lista quando novo: 60,025 € (impostos holandeses incluídos) · RDW, CC0
Perguntas
- Qual motor tem o 2014 Mercedes-Benz Sprinter?
- O 2014 Mercedes-Benz Sprinter tem um motor de 2.2 L.
- O 2014 Mercedes-Benz Sprinter tem campanhas de recall?
- 4 campanhas de recall estão registradas. A mais recente envolve Electrical (2021-02-05).
Outros anos
Outros modelos da Mercedes-Benz
Você possui um 2014 Sprinter?
Publique-o gratuitamente e alcance compradores que já estão interessados neste carro exato.
- Gratuito, sem comissão
- Cerca de três minutos
- Seu anúncio aparece nesta página