- Início
- Mercedes-Benz
- Sprinter
- 2019
Mercedes-Benz Sprinter 2019
O 2019 Mercedes-Benz Sprinter tem um motor de 2.2 L. 30 campanhas de recall estão registradas.
Especificações
| Cilindros | 4 |
|---|---|
| Comprimento | 6,262 mm (246.5 in) |
| Largura | 2,020 mm |
| Peso bruto | 2,745 kg (6,052 lb) |
| Assentos | 8 |
Especificações: média dos carros deste modelo registrados pela primeira vez em 2019 na Holanda (registro de veículos RDW).
À venda em Estados Unidos
Chamadas de retorno
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Detalhes
Issue: On certain vehicles, the rear frame may be missing reinforcements. As a result, the frame could become damaged and cause a change vehicle stability. This problem could also cause the mounting points for the third-row seats to fail in a crash. Safety Risk: A change in vehicle stability could cause a loss of control and increase the risk of a crash. Additionally, a seat that moves or separates in a crash could increase the risk of injury. Corrective Actions: Mercedes-Benz will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, repair the longitudinal frame members.
Detalhes
Issue: On certain vehicles, a software problem could cause the instrument cluster not to work. As a result, you may not be able to see certain information about the vehicle, including the speedometer, fuel gauge, indicator lamps, and warning messages. In addition, the warning sounds may not work. Safety Risk: Warnings and malfunction tell-tale information that does not display could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealership to update the instrument cluster software.
Detalhes
Issue: In certain conditions, the connection between the between fuse and fuse mount for the blower motor could overheat. Safety Risk: A fuse and wiring that overheats could create the risk of a fire. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealership to replace and relocate the blower motor fuse and its wiring. To reduce the safety risk, Mercedes-Benz recommends that you should only operate the blower in manual mode, and not use either the highest or lowest temperature settings until the recall repairs have been completed.
Detalhes
Issue: In certain conditions, the vehicle could roll-away after placing the transmission in the "P" (Park) position if the parking brake is not set. Note: You should always follow the parking procedure in the owner's manual, and set the parking brake each time that you park. Safety Risk: A parked vehicle that rolls away could create a risk of a crash or an injury. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealership to update the software of various control units.
Detalhes
Issue: On certain vehicles, a software problem could cause the rearview camera image not to appear on the central display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealership to update the rearview camera software.
Detalhes
Issue: In certain conditions, the vehicle could roll-away after placing the transmission in the "P" (Park) position if the parking brake is not set. Note: You should always follow the parking procedure in the owner's manual, and set the parking brake each time that you park. Safety Risk: A parked vehicle that rolls away could create a risk of a crash or an injury. Corrective Actions: Mercedes-Benz will notify owners by mail. The corrective actions for this recall are under development. Once a recall repair is available, Mercedes-Benz will send you a second notice and advise you to take your vehicle to a dealer to update the electronic stability program (ESP) control unit.
Detalhes
Issue: On certain vehicles equipped with front swivel-seats, the wiring harness under the seat may not be properly secured. As a result, the airbag wires could be damaged when the seat is moved. If this happens, the side airbag may not work properly in a crash. This problem could also cause the side airbag to deploy suddenly without a crash. Note: If the wiring to the side airbag is damaged, the SRS light will stay on in the instrument cluster. Safety Risk: An airbag that does not work properly could increase the risk of injury in a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the routing of the seat wiring harness. The dealer will add clips or cable ties to properly secure the wiring harness to the seat, if necessary.
Detalhes
Issue: On certain vehicles, a software problem could cause the rearview camera image not to appear on the central display. Canadian regulations require the rearview image to display when the transmission is shifted into reverse gear. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to update the software.
Detalhes
Issue: On certain vehicles, the driver may not be able to dim the lights on the instrument panel to a low level. As a result, light from the instrument panel could cause glare while driving at night. Canadian regulations require that the instrument panel lights can be dimmed to a lower level. Safety Risk: Glare from bright instrument panel lights could reduce visibility and increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to update the vehicle software.
Detalhes
Issue: On certain vehicles, the power steering return hoses may detach at their connection points. If this happens, power steering fluid can leak. This would result in a loss of power steering assist and power steering fluid could leak onto the road. Note: This is an expansion of Mercedes-Benz Recall 4695079 (Transport Canada Recall No. 2020-517). Safety Risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low speeds. This could increase the risk of a crash. A power steering fluid leak could create a road hazard. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to check the power steering return hose connections. Dealers will install a clamp at the connection point, if needed.
Detalhes
Issue: On certain vehicles, the bolt that attaches the brake pedal may slip out of its mount on one side. If this happens, the brake lights may stay on. Safety Risk: Brake lights that stay on could cause other road users not to recognize when the vehicle is braking. This could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your travel trailer to a dealer to install an additional retaining ring on the bearing bracket of the brake pedal.
Detalhes
Issue: On a small number of vehicles, a software problem could cause a delay in the appearance of the rearview camera image. Canadian regulations require the rearview image to display within 2 seconds of shifting the transmission into reverse gear. Safety Risk: A rearview camera that is slow to turn on could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to update the vehicle software.
Detalhes
Issue: On certain vehicles, the brake caliper may leak brake fluid into the electric parking brake over time. As a result, air could enter the hydraulic brake system. If this happens, the driver may experience a change in brake pedal feel and travel. This can cause reduced brake performance. Note: This recall only affects certain vehicles equipped with an electric parking brake. Safety Risk: Reduced brake performance could cause extended stopping distances and increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail. The corrective actions for this recall are under development.
Detalhes
Issue: On certain vehicles, the wiring harness for the telematics control unit could get stuck between the brake light switch and the brake pedal. If this happens, the brake lights could remain on. Additionally, the vehicle could be started and could be shifted into gear without the need to press the brake pedal. It is also possible that if a driver exits the vehicle through the cargo compartment, the transmission may not shift to Park automatically. This could result in unintended vehicle movement. Safety Risk: A vehicle that moves unexpectedly could create the risk of a crash. Brake lights that do not work properly could result in road users being confused of the driver's intentions, and increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to install an additional cable tie on the wiring harness for the telematics control unit.
Detalhes
This recall was replaced by Transport Canada Recall No. 2021-216. Issue: On certain vehicles, the power steering return hoses may detach at their connection points. If this happens, power steering fluid can leak. This would result in a loss of power steering assist and power steering fluid could leak onto the road. Safety Risk: A loss of power steering assist may result in a sudden increase in steering effort, especially at low speeds. This could increase the risk of a crash. A power steering fluid leak could create a road hazard. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to check the power steering return hose connections. Dealers will install a clamp at the connection point, if needed.
Detalhes
Issue: On certain vehicles, the clamps that connect the fuel hose to the solid fuel line may not have been properly installed. As a result, the connection may loosen over time and could leak fuel. If the hose detaches completely, fuel will spill and the engine may stall. Safety Risk: A fuel leak can create the risk of a fire. A sudden loss of engine power could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the fuel hose and its clamp connections. The dealer will tighten or replace the components, if required.
Detalhes
Issue: Certain vans were built without specific parts to improve handling and stability. Without these parts, the vans may not meet the vehicle stability requirements of Canadian regulations. Safety Risk: Poor vehicle handling and stability could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your van to a dealer to replace the stabilizer bar on the front axle, and replace the shock absorbers and install a stabilizer bar on the rear axle.
Detalhes
Issue: On certain vehicles equipped with front swivel-seats, the wiring harness under the seat may not be properly secured. As a result, the wiring harness could be damaged when the seat is moved. If this happens, the side airbag may not work properly in a crash. It could also cause the side airbag to deploy suddenly without a crash. Note: If the wiring to the side airbag is damaged, the SRS light will stay on in the instrument cluster. Safety Risk: An airbag that does not work properly could increase the risk of injury in a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the routing of the seat wiring harness. The dealer will add clips or cable ties to properly secure the wiring harness to the seat, if necessary.
Detalhes
Issue: Certain vehicles were delivered with an operator's manual that has incorrect information about the automatic parking function (Auto-P). Specifically, the transmission does not automatically shift to Park when the driver unbuckles their seat belt or leaves their seat while the vehicle is stationary or moving at very low speed. If the driver relies on the Auto-P feature in these situations, the vehicle could keep moving or roll away. Safety Risk: Sudden and unexpected movement of the vehicle could create a risk of injury or a crash. Corrective Actions: Mercedes-Benz will provide owners with a booklet that properly describes the Auto-P function.
Detalhes
Issue: On certain vehicles, the front brake hoses may contact the fender liners. This could cause damage to the hoses that can result in a brake fluid leak. If this happens, brake performance could be reduced. Note: A brake fluid leak can cause the low brake fluid warning to turn on. Safety Risk: Reduced brake performance can cause extended stopping distances and increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the front brake hoses. If the hoses are damaged, they will be replaced. Additionally, the front fenders liners will be cut to prevent future damage.
Detalhes
Issue: On certain vehicles, the screws that attach the intermediate bearing for the steering shaft may not be properly tightened. Over time, the screws may loosen and cause a rattling noise or a change in steering feel. If a driver continues to operate the vehicle, the screws could detach completely and cause a loss of steering control. Safety Risk: A loss of steering could create the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to replace the screws on the steering spindle intermediate bearing.
Detalhes
Issue: On certain vehicles, the roof may be missing welds where the roof bows attach to the B-pillar. This could affect the crash protection of the vehicle. Safety Risk: A vehicle with an improperly welded roof could create an increased risk of injury in a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to weld the missing seams.
Detalhes
Issue: On certain vehicles, the connection between the turbocharger and the diesel particulate filter could leak. This could cause hot exhaust to leak into the engine compartment. As a result, nearby parts (like the oil separator) could be damaged. Safety Risk: An exhaust leak in the engine compartment could damage other parts and create the risk of a fire. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to replace the flange seals between the turbocharger and diesel particulate filter.
Detalhes
Issue: On certain vehicles, the exhaust gas recirculation (EGR) pipe may not be completely sealed. This could cause hot exhaust gas to leak into the engine compartment. As a result, nearby components (like the oil separator) could be damaged. Safety Risk: An exhaust leak in the engine compartment could damage components and create the risk of a fire. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect and repair the screw connections and flange seals on the EGR pipe.
Detalhes
Issue: On certain diesel-powered vehicles, the fuel pump may not have been properly installed in the fuel tank. As a result, a fuel leak could occur. Safety Risk: A diesel fuel leak on the roadway could create a hazard for other road users by making the road slippery. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the lock on the fuel pump mount. If necessary, it will be locked correctly.
Detalhes
Issue: On certain vans, the upper hood latch may not be properly installed. Under some driving conditions, this could allow the hood to open suddenly while driving. Safety Risk: If the hood opens while driving, it could suddenly block a driver's view. This could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct them to take their van to a dealer to inspect, and if necessary, tighten the mounting screws for the upper hood latch. Any missing screws will be replaced.
Detalhes
Issue: On certain vehicles, if the light switch is turned quickly, the tail lights may dim or turn off completely. Safety Risk: Tail lights that are dimmed or not working could make the vehicle less visible to other drivers and increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct them to take their vehicle to a dealer to update the body controller software.
Detalhes
Issue: Certain vans were built with the wrong type of glass in one or both of the rear-side windows. Tempered glass was used in place of laminated glass. As a result, the vehicles may not meet the ejection mitigation requirements of the Canadian regulations. Safety Risk: Vans built with incorrect side window glass could create a risk of ejection and injury in a rollover or side-impact crash. Corrective Actions: The company will notify owners by mail and instruct them to take their van to a dealer to replace the tempered window glass with laminated glass.
Detalhes
Issue: A software problem could make it impossible to turn off the high-beam headlights using the switch lever. This problem only affects certain vans with the high-beam assist option. Note: If this happens, the high-beams can be turned off by turning the headlight switch from the "automatic headlights" position to the "manual headlights" position, or by re-starting the van. Safety Risk: High-beam lights that stay on could cause glare and reduce visibility for oncoming traffic. This could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct you to take your van to a dealer to update the body controller software.
Detalhes
Issue: The headlight range adjustment sensor on certain vans equipped with LED high performance headlights may not have been installed or not have been calibrated correctly. This could cause the automatic headlights not to adjust properly. Safety Risk: Headlights that are not properly adjusted may not light the road well and could cause glare for oncoming drivers. Either of these situations could increase the risk of a crash. Corrective Actions: Mercedes-Benz will notify owners by mail and instruct them to take their van to a dealer inspect and repair the automatic headlight sensor as necessary.
Traduzido automaticamente do texto em holandês do RDW. O original está na fonte.
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Consequência · Solução
The fuse holder for the interior fan may not be properly mounted. Under certain conditions, this could lead to heat development in the area of the fuse holder, potentially causing a fire in the vehicle.
The vehicle owner is requested to make an appointment with a brand dealer. The fuse holder and the wiring will be replaced.
Consequência · Solução
A component of the parking lock system of the automatic transmission may wear unusually and impede the safe parking of the vehicle. If the driver does not engage the handbrake when parking the vehicle (contrary to the owner's manual), the vehicle may roll away, posing a risk of an accident.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the software of various control units (e.g., ESP and shift unit).
Consequência · Solução
A component of the parking lock system of the automatic transmission may wear unusually and hinder the safe parking of the vehicle. If the driver does not apply the handbrake while parking the vehicle (against the user manual), the vehicle may roll away, posing a risk of an accident.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the software of various control units (e.g. ESP and transmission control unit).
Consequência · Solução
The rearview camera may have a fault causing no image to be displayed after engaging reverse gear. This obstructs the view to the rear, increasing the risk of an accident.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the software of the rearview camera.
Consequência · Solução
Due to a temporary voltage drop in the electrical system, the emergency call system may possibly send the wrong location of the vehicle. If the wrong location is sent during an emergency call, it may delay the arrival of emergency services.
The vehicle owner is requested to make an appointment with a brand dealer. They will perform a software update to upgrade the Hermes control unit.
Consequência · Solução
The parking lock may not function properly. If the parking brake is not used, the parked vehicle may roll away.
The vehicle owner is requested to make an appointment with a brand dealer. The software of the control unit of the electronic stability program (ESP(R)) will be adjusted.
Consequência · Solução
Cracks may develop in the crossmember of the towbar. Cracks in the crossmember can lead to the crossmember failing, and in extreme cases, the trailer coupling may break off.
The vehicle owner is requested to make an appointment with a brand dealer. They will check the crossmember of the towbar and replace it if necessary.
Consequência · Solução
The connection point of the return line of the hydraulic power steering may not be properly secured, which can cause the power steering to fail. Under certain operating conditions, the line may detach from the hydraulic power steering, resulting in loss of power steering.
The vehicle owner is requested to make an appointment with an authorized dealer. They will check the connections of the hydraulic lines for the power steering and secure them again with a hose clamp if necessary.
Consequência · Solução
The brake hose on the front axle may come into contact with the inner lining of the wheel arch and begin to rub. The rubbing spots on the brake hoses may wear through over time, potentially leading to a loss of brake fluid and, in the worst case, a loss of braking power.
The vehicle owner is requested to make an appointment with a brand dealer. They will replace the brake hose with a new version on the front axle.
Consequência · Solução
The cross member of the tow bar may crack or break due to material fatigue. This could lead to the failure of the cross member, and in the worst case, the trailer coupling could tear away. This could increase the risk of a traffic accident.
The vehicle owner is requested to make an appointment with a brand dealer. The work consists of replacing the cross member of the tow bar.
Consequência · Solução
The bolt on which the brake pedal pivots may not be sufficiently secured and could possibly come loose when the foot brake is operated. If the bolt comes loose, the brake pedal will feel different and take on another position, causing the brake lights to possibly stay on continuously. The braking function remains intact.
The vehicle owner is requested to make an appointment with an authorized dealer. The dealer will check the securing of the bolt in the brake pedal pivot point and renew it if necessary.
Consequência · Solução
Over time, air may enter the brake system through the brake calipers on the rear axle. Air in the brake system results in a changed brake pedal feel, a longer brake pedal stroke, and reduced braking performance.
The vehicle owner is requested to make an appointment with a brand dealer. They will check the brake fluid level, replace the brake calipers on the rear axle, and update the software version of the ESP control unit.
Consequência · Solução
There may be a malfunction in the gear recognition function in the transmission. The reverse light may only function until the next ignition cycle or the engine is started.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the software responsible for gear recognition.
Consequência · Solução
The electrical wiring harness may get caught between the brake light switch and the brake pedal lever. As a result, the wiring harness may get damaged. The brake light remains permanently on. The ESP is deactivated and the vehicle may roll away.
The vehicle owner is requested to make an appointment with a brand dealer. The cable routing of the wiring harness will then be corrected.
Consequência · Solução
The ball coupling may crack or break due to material fatigue. The ball coupling may potentially break off.
The vehicle owner is requested to make an appointment with a brand dealer. The work will consist of checking the ball coupling and replacing it if necessary.
Consequência · Solução
The fuse for the air suspension protection may have been installed with a higher rating due to incorrect listing in the fuse chart. This could result in permanently increased current flowing through the wiring, potentially causing individual wires in the air suspension system to smolder.
The vehicle owner is requested to make an appointment with a brand dealer. They will check the installed fuse rating and, if necessary, replace it. Additionally, the fuse chart and, in certain vehicles, the control unit of the air suspension system will be replaced.
Consequência · Solução
The ball coupling may crack or break due to material fatigue. The ball coupling may possibly disconnect.
The vehicle owner is requested to make an appointment with a brand dealer. The work involves checking the ball coupling and, if necessary, replacing it.
Consequência · Solução
The underrun protection at the rear of the vehicle is missing. Insufficient protection. A vehicle colliding from behind may slide under the vehicle, posing a higher risk of injury for these road users.
The vehicle owner is requested to make an appointment with a brand dealer. They will install the necessary underrun protection at the rear of the vehicle.
Consequência · Solução
The glow time relay may potentially be damaged in an accident. This may cause a short circuit.
The vehicle owner is requested to make an appointment with a brand dealer. They will install a cover (Crash box) for the glow time end stage and simultaneously equip the power supply to the glow time end stage with a pyrotechnic fuse.
Consequência · Solução
The electrical cables running under the rotating seat frames may become damaged. The wiring harness of the side airbag also runs under the rotating seat. In the worst case, damage to the wiring may cause the side airbag to deploy unexpectedly or not deploy during an accident.
The vehicle owner is requested to make an appointment with a Mercedes-Benz dealer. As part of the above measure, the cable routing of the rotating seats will be adjusted.
Consequência · Solução
The brake hoses may come into contact with the front wheel inner fenders. The brake hoses of the front wheels may become damaged, leading to loss of brake fluid and braking power.
The mounting position of the fender liners and adjacent components will be checked and adjusted or replaced if necessary. If a brake hose shows signs of wear or damage, we request that you have it replaced.
Consequência · Solução
The leaf springs on the rear axle may break. If the leaf spring breaks, the rear axle fixation is no longer guaranteed, which may lead to loss of control over the vehicle.
The rear axle springs will be checked and replaced if necessary.
Consequência · Solução
A weld seam in the front seat height adjustment may break in the event of an accident, causing the seat to slide forward and down. If the front seats shift due to the weld of the seat height adjustment breaking during an accident, the protective effect of the airbag system may be insufficient.
The frame of the front seats will be replaced.
Consequência · Solução
The bolts securing the hood latch to the hood may not have been tightened properly. As a result, the latch may come loose. The hood may open while driving.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will check the fastening and repair it if necessary.
Consequência · Solução
A stabilizer bar is missing. (Not yet known)
(Not yet known)
Consequência · Solução
The wiring and fuse holder of the air suspension compressor are insufficiently resistant to electrical loads. Thermal overload may occur.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will remove the fuse holder and install thicker wiring.
Consequência · Solução
The lighting software may not work properly. Rapidly turning the light switch may cause the brightness of the tail lights to significantly decrease. Poorly functioning tail lights lead to reduced visibility.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the software of the relevant control unit.
Consequência · Solução
The high beam may not be switched off when set to automatic and the camera system is being disturbed. This can blind oncoming traffic.
The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the relevant software.
Consequência · Solução
A centering sleeve between the automatic transmission and the control module may not be installed. As a result, water can enter the module and cause a malfunction. Inability to operate the transmission.
The vehicle owner is requested to make an appointment with a brand dealer. They will check if the centering sleeve is present. If absent, the control module will be replaced. The software of the module will be further updated.
Consequência · Solução
On the right and left sides of the cross beam at the rear axle, a weld may not be properly applied. Additionally, the rear axle is insufficiently sturdy. The driving characteristics of the vehicle are negatively affected, allowing the driver to lose control of the vehicle.
The vehicle owner is requested to make an appointment with a brand dealer. They will install a reinforcement bracket. If the weld joint is missing, the entire cross beam will be replaced.
Consequência · Solução
The cover plate on the sliding door stop is missing. When the door is fully open or when working in the vehicle, the sharp plate part is exposed, and the risk of injury is not excluded.
The vehicle owner is requested to make an appointment with a brand dealer. They will check if the cover plate is present and will install it afterward if absent.
Consequência · Solução
The jack support points are not properly described in the digital manual. By placing the jack on points not intended for this purpose, the vehicle can slip off the jack.
The vehicle owner is requested to make an appointment with a brand dealer. They will update the digital operating manual.
Consequência · Solução
A wrong operating lever may have been installed on the electronically released door locks. This may prevent the opening of the passenger door, the sliding door of the cargo space, and the right rear door of the vehicle from both the inside and outside, hindering escape routes via these doors.
The manufacturer is taking measures. The vehicle owner is requested to make an appointment with a brand dealer. They will check the vehicle and, if necessary, replace the door locks.
Consequência · Solução
It is possible that an incorrect control lever has been installed on the electronically unlocked door locks. This may prevent the passenger door, the cargo area sliding door, and the right rear door from opening both inside and outside, hindering the escape route through these doors.
The manufacturer will take measures. The vehicle owner is requested to make an appointment with an authorized dealer. They will inspect the vehicle and replace the door locks if necessary.
Consequência · Solução
The brake light switch wiring may become pinched between the brake pedal actuator. The brake light stays on permanently. Incorrect information from the brake control can lead to the disabling of various functions and assistance systems, such as the ESP.
The vehicle owner is requested to make an appointment with a brand dealer. They will properly secure the wiring of the brake light switch.
Consequência · Solução
An incorrect holder was installed on the corner rotation sensor of the rear axle. As a result, the headlight leveling system does not function correctly. The headlights may be adjusted too high by the automatic leveling system, potentially dazzling oncoming traffic.
The vehicle owner is requested to make an appointment with a brand dealer. They will install the correct holder.
Consequência · Solução
The exit warning of the blind spot assistant may not work after the ignition is turned off. The driver or passenger do not receive a visual or acoustic warning for oncoming traffic when exiting the vehicle.
The manufacturer is taking measures. The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the coding of the front doors.
Consequência · Solução
Due to a software error, the background lighting of the hazard light switch turns off after 20 minutes. Visibility of the switch is limited in the dark. This may make it difficult to find when needed.
The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the software.
Consequência · Solução
Due to a software error, vehicles with blind spot assistance and automatic transmission may disable the exit warning after the ignition is turned off. The driver or passenger will not be visually or acoustically warned about oncoming traffic when leaving the vehicle.
The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the software.
Consequência · Solução
After a collision, the automatic braking system does not function. The vehicle does not come to a stop properly.
The manufacturer will take measures. The vehicle owner is requested to make an appointment with a brand dealer. They will adjust the software.
Consequência · Solução
Some spot welds at the hinge attachment on the left and right A-pillar are missing. The absence of these spot welds may negatively impact the crash safety of the vehicle.
The vehicle owner is requested to make an appointment with a brand dealer. They will check the spot welds and apply them if necessary.
Na estrada
Carros deste modelo registrados pela primeira vez em 2019, a partir de registros oficiais. Cada figura pertence ao seu país.
🇳🇱 Registro de veículos, Holanda
1,969 ainda registrado
35% com um recall aberto
Preço médio de lista quando novo: 77,723 € (impostos holandeses incluídos) · RDW, CC0
Perguntas
- Qual motor tem o 2019 Mercedes-Benz Sprinter?
- O 2019 Mercedes-Benz Sprinter tem um motor de 2.2 L.
- O 2019 Mercedes-Benz Sprinter tem campanhas de recall?
- 30 campanhas de recall estão registradas. A mais recente envolve Structure (2023-12-21).
Outros anos
Outros modelos da Mercedes-Benz
Você possui um 2019 Sprinter?
Publique-o gratuitamente e alcance compradores que já estão interessados neste carro exato.
- Gratuito, sem comissão
- Cerca de três minutos
- Seu anúncio aparece nesta página