- Home
- Mitsubishi
- Outlander
- 2011
2011 Mitsubishi Outlander
The 2011 Mitsubishi Outlander came with 3 engines: 2.0 L 4-cylinder, 2.4 L 4-cylinder, 3.0 L 6-cylinder. It gets 21 to 27 MPG combined depending on the engine, per the EPA. 8 recall campaigns and 88 owner complaints are on record.
Specs
| Cylinders | 4 |
|---|---|
| Transmission | CVT (continuously variable) |
| Drivetrain | 4x4 |
| Length | 4,642 mm (182.8 in) |
| Width | 905 mm |
| Curb weight | 1,462 kg (3,223 lb) |
| Seats | 5 |
| Body style | Sport Utility Vehicle - 2WD |
Specs: average of the cars of this model first registered in 2011 in the Netherlands (RDW vehicle register).
For sale in United States
Safety
Crash-test results across markets. They can vary by version and equipment.
Fuel economy (MPG)
🇺🇸 Local dataBy version
| Engine | Transmission | Drivetrain | City | Highway | Combined |
|---|---|---|---|---|---|
| 2.0 L 4-cylinder | CVT (continuously variable) | 4x4 | 24 MPG | 29 MPG | 26 MPG |
| 2.0 L 4-cylinder | CVT (continuously variable) | Front-wheel (FWD) | 24 MPG | 30 MPG | 27 MPG |
| 2.0 L 4-cylinder | Manual · 5 speeds | Front-wheel (FWD) | 24 MPG | 30 MPG | 26 MPG |
| 2.4 L 4-cylinder | CVT (continuously variable) | 4x4 | 22 MPG | 27 MPG | 24 MPG |
| 2.4 L 4-cylinder | CVT (continuously variable) | Front-wheel (FWD) | 23 MPG | 28 MPG | 25 MPG |
| 3.0 L 6-cylinder | Automatic · 6 speeds | 4x4 | 19 MPG | 24 MPG | 21 MPG |
| 3.0 L 6-cylinder | Automatic · 6 speeds | Front-wheel (FWD) | 19 MPG | 26 MPG | 22 MPG |
EPA figures for each version sold in the U.S.
Recalls
Consequence · Remedy
A detached front control arm can result in a loss of vehicle control, increasing the risk of a crash.
MMNA will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one. These repairs will be performed free of charge. The recall began August 7, 2020. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-20-003.
Consequence · Remedy
If the drive belt detaches, the battery will discharge and the engine will stall, increasing the risk of a crash.
MMNA will notify owners, and dealers will replace the belt tensioner with one that has an improved shape, free of charge. The recall is expected to begin March 27, 2018. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-18-001.
Consequence · Remedy
Failure of the wiper motor can cause a loss of visibility, increasing the risk of a crash.
MMNA will notify owners, and dealers will replace the wiper motor, free of charge. The recall began July 28, 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-17-003.
Consequence · Remedy
Loss of wiper function can reduce visibility and increase the risk of a crash.
MMNA will notify owners, and dealers will replace the rubber boot on the ball joint to prevent water intrusion. Additionally, they will inspect the wiper motor crank arm for excessive play, replacing it as necessary. These repairs will be done free of charge. The recall began on July 28, 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-009.
Consequence · Remedy
A detached front control arm can result in the loss of control of the vehicle, increasing the risk of a crash.
MMNA will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one that has a sealing/anti-corrosion agent applied to it. These repairs will be performed free of charge. The recall began January 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-003.
Consequence · Remedy
Failure of the blower motor may reduce the performance of the windshield defroster, diminishing the driver's visibility and increasing the risk of a crash.
Mitsubishi will notify owners, and dealers will replace a suspect blower motor, free of charge. The recall began on June 15, 2015. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-15-003.
Consequence · Remedy
If the drive belt detaches, the battery may discharge, resulting in an engine stall, increasing the risk of a crash.
Mitsubishi will notify owners, and dealers will replace the drive belt with a rubber belt. Drive pulleys that are excessively worn will be replaced. These repairs will be performed free of charge. The recall began on October 15, 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-009.
Consequence · Remedy
A power steering fluid leak could result in a loss of steering assistance, increasing the risk of a crash.
Mitsubishi will notify owners, and dealers will replace the power steering pressure tube and return tube, free of charge. The recall began in August 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-006.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Details
Issue: On certain vehicles, the compliance label may be missing information in French. The words and abbreviations listed on the label for "TIRES", "RIMS", "WITH", "FR" and "RR" and appear in English only, when they should be listed as "TIRES/PNEUS", "RIMS/JANTES", "WITH/AVEC", "FR/AVT" and "RR/ARR". Canadian regulations require this information to be listed on the label in both English and French. Safety Risk: These small errors do not affect vehicle safety. Corrective Actions: This is not a recall. Mitsubishi has corrected the compliance label for all new vehicles.
Details
Issue: On certain vehicles, road salt can corrode the front cross-member (subframe). As a result, a lower control arm could eventually detach from the cross-member. This could cause a loss of vehicle control. Safety Risk: A loss of control can create the risk of a crash. Corrective Actions: Mitsubishi will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the front cross-member (subframe). If no significant corrosion is found, the dealer will spray a sealing and anti-corrosion coating both inside and on the cross-member. If significant corrosion is found, the dealer will replace the cross-member.
Details
On certain vehicles, the flange of the drive belt automatic tensioner may crack over time due to repetitive high load operations and stress concentration. This could cause the drive belt to detach, leading to battery depletion, which would result in a loss of motive power and a loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the auto tensioner with a countermeasure unit.
Details
On certain vehicles, water may drain from the windshield cowl area and potentially collect in the area of the wiper motor breathing hole. If the wiper motor is not operating, water could potentially enter the wiper motor through the breathing hole. If this occurs, over time, it could result in corrosion and/or an electrical conduction failure, both of which could result in the wiper motor not operating. If the wiper motor were to stop operating, the windshield wipers would become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the wiper motor with an upgraded wiper motor that will prevent water intrusion.
Details
On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the rubber boot which covers the ball joint with a countermeasure one, and the wiper motor crank arm will also be inspected and replaced as necessary.
Details
On certain vehicles, road salt can corrode the front crossmember assembly, which may ultimately lead to separation of the control arm at the mounting point. This would allow the wheel to rotate off its designed axis, and could result in a loss of vehicle control and a crash causing property damage and/or personal injury. Correction: Dealers will inspect the crossmember and apply an anti-corrosion treatment or replace the assembly, as required.
Details
On certain vehicles, the blower motor may have been incorrectly manufactured. This could result in a premature failure of the blower motor which could affect the defroster performance resulting in reduced visibility, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace blower motor and the power transistor as needed.
Details
On certain vehicles, the drive belt material may cause abnormal pulley wear. If the vehicle is driven under this condition, the drive belt may become damaged from the worn pulley and detach, affecting electrical charging system and cooling system function and would illuminate the engine warning lamp(s) on the instrument panel. This could result in battery depletion and an overheated engine, resulting in a loss of motive power. Vehicles equipped with a hydraulic power steering system could also experience loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the drive belt, and the pulley will be replaced if it is found worn beyond a certain level.
Details
Certain 2013 model year vehicles with a 6-speed automatic transmission may have been manufactured with insufficient clearance between the power steering pressure tube and the bosses on the converter housing of the automatic transaxle. This may cause the power steering pressure tube to rust from abrasive contact between the two components. In the worst case, a pin hole could develop and allow for power steering fluid leakage, which can result in the loss of power steering assist and increase the risk of crash causing injury and/or property damage. Correction: Dealers will replace the power steering pressure tube and return tube. Note: Only a limited number of 2007 to 2012 model year vehicles equipped with a replacement automatic transaxle with the bosses on the converter housing are included in the recall population.
Translated automatically from the RDW's Dutch text. The original is at the source.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Consequence · Remedy
The multi-rib belt tensioner may be incorrectly constructed. This can lead to excessive tension on the multi-rib belt. The multi-rib belt may come off the pulleys. This can cause the power steering to fail and the engine may overheat. The driver will be warned by the illumination of the engine warning light on the dashboard.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will check the multi-rib belt tensioner and replace it if necessary.
Consequence · Remedy
Due to aging of the adhesive layer, the adhesion between the sunroof glass panel and the sunroof frame may decrease. This can cause the glass panel to become loose. If the glass panel comes loose, it can pose a danger to other road users.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will replace the sunroof frame and the glass panel.
Consequence · Remedy
Water may enter the windshield wiper motor. This can cause the windshield wiper motor to stop functioning.
The manufacturer is recalling the affected vehicles. Measures will be taken to resolve the defect. The vehicle owner is requested to make an appointment with a brand dealer. The windshield wiper motor will then be replaced.
Consequence · Remedy
The transition resistance in the Electronic Control Unit (ECU) may cause voltage loss. The lighting and windshield wipers may fail.
The manufacturer is recalling the affected vehicles. Measures are being taken to rectify the defect. The vehicle owner is requested to contact an authorized dealer to make an appointment. They will check the ECU for production date and replace it if necessary.
Consequence · Remedy
The multi-ribbed belt contains material that may cause the guide pulleys to wear unevenly. The multi-ribbed belt may come off the guide pulleys. The power steering pump may fail, requiring more effort to steer the vehicle. Additionally, the vehicle may stall due to loss of tension.
The manufacturer is recalling the affected vehicles. Measures will be taken to resolve the defect. The vehicle owner is requested to contact a brand dealer to make an appointment. The multi-ribbed belt and, if necessary, the tensioner pulleys will then be replaced.
Consequence · Remedy
Due to incorrect installation of a switch in the brake booster, a component may break. If the defect occurs, the brake pedal will not return to its initial position. As a result, the vehicle will unintentionally slow down.
The manufacturer is recalling the affected vehicles. Measures are being taken to rectify the defect. The vehicle owner is requested to contact a brand dealer to make an appointment. The dealer will check the production number on the brake booster and, if necessary, replace the brake booster.
Consequence · Remedy
The flange of the alternator pulley has been produced unevenly. Additionally, the alternator pulley has been tightened with too low a torque. This can cause the attachment of the alternator pulley to loosen. If the alternator pulley comes loose, power steering may fail. The charging system may also fail. The driver is warned by a warning light if the charging system fails.
The manufacturer is recalling the affected vehicles. Measures will be taken to fix the defect. The vehicle owner is invited to make an appointment with the brand dealer in the short term. They will check whether the installed alternator has an incorrect alternator pulley and will replace the alternator with a modified type if necessary.
Consequence · Remedy
During the assembly of the vehicle, the handbrake cable was not correctly hooked to the operating lever. This can cause the handbrake cable to disengage from the operating lever, resulting in loss of handbrake operation.
The distributor is recalling the affected vehicles. Measures will be taken to resolve the defect. The vehicle owner is invited to make an appointment with the brand dealer shortly. They will check the attachment of the handbrake cable and mount it correctly if necessary.
On the road
Cars of this model first registered in 2011, from official registers. Each figure belongs to its country.
🇳🇱 Vehicle register, Netherlands
841 still registered
14% with an open recall
Average list price when new: 32,551 € (Dutch taxes included) · RDW, CC0
Common problems
88 reports🇺🇸 Local dataReported by owners to the source below. It is not a verdict on this car: it is what people wrote.
What component or system failed or malfunctioned, and is it available for inspection? The engine experienced catastrophic internal failure. A connecting rod broke and punctured the engine block, rendering the vehicle completely inoperable. This failure is consistent with overheating and internal engine damage. The veh…
I am submitting this complaint regarding Peachtree Mitsubishi, located at 4474 Buford Hwy, Atlanta, GA 30341, for their failure to properly address a critical safety recall on my vehicle: Mitsubishi Recall SR-20-003REV_1 (NHTSA Campaign Number 20V-279) — Crossmember Corrosion, which poses a serious risk of lower contr…
The contact owns a 2011 Mitsubishi Outlander Sport. The contact stated while driving 50 MPH in the rain, the windshield wipers were fully engaged; however, wiper motor failed to operate as intended. The failure obstructed the driver's visibility, preventing the driver from safely operating the vehicle, creating a visi…
The car has severe rust on the frame to the point of the rust corroding a hole in the frame making it unsafe to drive. Black paint has been applied to conceal the extent of the rust, demonstrating clear intent to mislead and a disregard for human safety. The catalytic converter has been aftermarket welded into place …
Since I bought my car in 2021 the air bag system sensor goes off as well as the seatbelt light even if my seatbelt is on.
Not starting due to corrosion issues
The contact owns a 2011 Mitsubishi Outlander Sport. The contact stated while driving approximately 25–30 MPH, the vehicle stalled. There were no warning lights illuminated. The vehicle was towed to an independent mechanic, who informed the contact that the check engine, 4-WD, ABS, traction control, and oil pressure wa…
Consumes ( Burns ) good amount of oil
Was driving the car and it totally lost power to everything. Had to pull over immediately with whatever power I had left to have the car roll to a stop. Multiple lights came on the dash. Notification came on the screen saying car can not communicate, engine is over heating. Tried to turn off car and back on and it wou…
The engine is shutting off while In traffic and from a full stop on red light. This happened so many times. I had to put on park and start the engine for it to work again.
The Diamond white paint is pealing off the hood. Down to bare mettle. It is also gone from the back hatch under the rear window. I also have a slow drain in the electrical system. A battery lasts about 1 year. Then it is dead and will not charge.
Unknown
2011 vs. other Outlander years
🇺🇸 Local dataOwner complaints and recall campaigns on record at NHTSA for each model year. Fewer complaints can also mean fewer cars sold or a newer car.
Questions
- What engine does the 2011 Mitsubishi Outlander have?
- The 2011 Mitsubishi Outlander came with 3 engines: 2.0 L 4-cylinder, 2.4 L 4-cylinder, 3.0 L 6-cylinder.
- What is the fuel economy of the 2011 Mitsubishi Outlander?
- It gets 21 to 27 MPG combined depending on the engine, per the EPA.
- Does the 2011 Mitsubishi Outlander have recalls?
- 8 recall campaigns are on record. The latest concerns Structure (2020-05-18).
- What are the common problems of the 2011 Mitsubishi Outlander?
- 88 owners have filed complaints, most often about engine.
Other years
Other models by Mitsubishi
Do you own a 2011 Outlander?
Post it for free and reach buyers who are already looking at this exact car.
- Free, with no commission
- About three minutes
- Your listing shows up on this page