- Home
- Mitsubishi
- Outlander
- 2008
2008 Mitsubishi Outlander
The 2008 Mitsubishi Outlander came with 2 engines: 2.4 L 4-cylinder, 3.0 L 6-cylinder. It gets 20 to 22 MPG combined depending on the engine, per the EPA. ANCAP rates it 5 out of 5 stars. 12 recall campaigns and 58 owner complaints are on record.
Specs
| Cylinders | 4 |
|---|---|
| Transmission | CVT (continuously variable) |
| Drivetrain | AWD |
| Length | 4,143 mm (163.1 in) |
| Width | 94 mm |
| Curb weight | 1,489 kg (3,283 lb) |
| Seats | 5 |
| Body style | Sport Utility Vehicle - 2WD |
Specs: average of the cars of this model first registered in 2008 in the Netherlands (RDW vehicle register).
For sale in United States
Safety
Crash-test results across markets. They can vary by version and equipment.
Fuel economy (MPG)
🇺🇸 Local dataBy version
| Engine | Transmission | Drivetrain | City | Highway | Combined |
|---|---|---|---|---|---|
| 2.4 L 4-cylinder | CVT (continuously variable) | AWD | 20 MPG | 25 MPG | 22 MPG |
| 2.4 L 4-cylinder | CVT (continuously variable) | Front-wheel (FWD) | 20 MPG | 25 MPG | 22 MPG |
| 3.0 L 6-cylinder | Automatic · 6 speeds | AWD | 17 MPG | 24 MPG | 20 MPG |
| 3.0 L 6-cylinder | Automatic · 6 speeds | Front-wheel (FWD) | 17 MPG | 25 MPG | 20 MPG |
EPA figures for each version sold in the U.S.
Recalls
Consequence · Remedy
A detached front control arm can result in a loss of vehicle control, increasing the risk of a crash.
MMNA will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one. These repairs will be performed free of charge. The recall began August 7, 2020. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-20-003.
Consequence · Remedy
If the drive belt detaches, the battery will discharge and the engine will stall, increasing the risk of a crash.
MMNA will notify owners, and dealers will replace the belt tensioner with one that has an improved shape, free of charge. The recall is expected to begin March 27, 2018. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-18-001.
Consequence · Remedy
If the sunroof glass detaches from the assembly while driving, it can become a road hazard, increasing the risk of a crash.
MMNA will notify owners, and dealers will replace the sunroof glass assembly, free of charge. The recall began on February 27, 2018. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-18-003.
Consequence · Remedy
Failure of the wiper motor can cause a loss of visibility, increasing the risk of a crash.
MMNA will notify owners, and dealers will replace the wiper motor, free of charge. The recall began July 28, 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-17-003.
Consequence · Remedy
Loss of wiper function can reduce visibility and increase the risk of a crash.
MMNA will notify owners, and dealers will replace the rubber boot on the ball joint to prevent water intrusion. Additionally, they will inspect the wiper motor crank arm for excessive play, replacing it as necessary. These repairs will be done free of charge. The recall began on July 28, 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-009.
Consequence · Remedy
A detached front control arm can result in the loss of control of the vehicle, increasing the risk of a crash.
MMNA will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one that has a sealing/anti-corrosion agent applied to it. These repairs will be performed free of charge. The recall began January 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-003.
Consequence · Remedy
Brake lights that are inoperative would not warn other drivers that the vehicle is stopping, increasing the risk of a crash.
Mitsubishi will notify owners, and dealers will replace the brake light switch with a new one, free of charge. The recall began in mid-October 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-010. Note: This recall is an expansion of recall 08V-680 and does not include any vehicles that were previously recalled.
Consequence · Remedy
If the drive belt detaches, the battery may discharge, resulting in an engine stall, increasing the risk of a crash.
Mitsubishi will notify owners, and dealers will replace the drive belt with a rubber belt. Drive pulleys that are excessively worn will be replaced. These repairs will be performed free of charge. The recall began on October 15, 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-009.
Consequence · Remedy
A power steering fluid leak could result in a loss of steering assistance, increasing the risk of a crash.
Mitsubishi will notify owners, and dealers will replace the power steering pressure tube and return tube, free of charge. The recall began in August 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-006.
Consequence · Remedy
THIS MAY TEMPORARILY INCREASE THE STOPPING DISTANCE OF THE VEHICLE AND THEREFORE INCREASE THE RISK OF A CRASH.
DEALERS WILL REPLACE THE BRAKE BOOSTER CHECK VALVE FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING APRIL 2009. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
Consequence · Remedy
THE FAILURE OF THE BRAKE LAMPS TO ILLUMINATE WHEN THE BRAKES ARE APPLIED WILL NOT PROVIDE WARNING TO FOLLOWING TRAFFIC AND COULD RESULT IN A CRASH.
DEALERS WILL REPLACE THE STOP LAMP SWITCH. THE RECALL IS EXPECTED TO BEGIN DURING FEBRUARY 2009. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
Consequence · Remedy
THE CONNECTOR TERMINAL MAY CORRODE AND ALLOW CURRENT TO FLOW, RESULTING IN THE GRADUAL HEATING AND MELTING OF THE CONNECTOR AND MAY RESULT IN A FIRE.
DEALERS WILL RELOCATE THE FLOOR HARNESS FROM BENEATH BOTH THE PASSENGER AND DRIVER SEATS TO ABOVE THE CARPET AND AWAY FROM THE BOTTOM OF THE FLOORBOARD TO PREVENT CONTACT WITH ANY FUTURE MELT SOLUTION. THE RECALL BEGAN ON APRIL 7, 2008. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Details
Issue: On certain vehicles, road salt can corrode the front cross-member (subframe). As a result, a lower control arm could eventually detach from the cross-member. This could cause a loss of vehicle control. Safety Risk: A loss of control can create the risk of a crash. Corrective Actions: Mitsubishi will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the front cross-member (subframe). If no significant corrosion is found, the dealer will spray a sealing and anti-corrosion coating both inside and on the cross-member. If significant corrosion is found, the dealer will replace the cross-member.
Details
On certain vehicles, the sunroof may not have been bonded properly and could separate from the vehicle. This could pose a risk to other road users, increasing the risk of injury and/or damage to property. Correction: Dealers will replace the sunroof glass assembly.
Details
On certain vehicles, the flange of the drive belt automatic tensioner may crack over time due to repetitive high load operations and stress concentration. This could cause the drive belt to detach, leading to battery depletion, which would result in a loss of motive power and a loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the auto tensioner with a countermeasure unit.
Details
On certain vehicles, water may drain from the windshield cowl area and potentially collect in the area of the wiper motor breathing hole. If the wiper motor is not operating, water could potentially enter the wiper motor through the breathing hole. If this occurs, over time, it could result in corrosion and/or an electrical conduction failure, both of which could result in the wiper motor not operating. If the wiper motor were to stop operating, the windshield wipers would become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the wiper motor with an upgraded wiper motor that will prevent water intrusion.
Details
On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the rubber boot which covers the ball joint with a countermeasure one, and the wiper motor crank arm will also be inspected and replaced as necessary.
Details
On certain vehicles, road salt can corrode the front crossmember assembly, which may ultimately lead to separation of the control arm at the mounting point. This would allow the wheel to rotate off its designed axis, and could result in a loss of vehicle control and a crash causing property damage and/or personal injury. Correction: Dealers will inspect the crossmember and apply an anti-corrosion treatment or replace the assembly, as required.
Details
On certain vehicles, a defect in the brake light switch could cause the brake lights to become inoperative. Failure of the brake lights to illuminate when the brake pedal is depressed could result in a crash causing injury and/or property damage. Correction: Dealers will replace the brake lamp switch.
Details
On certain vehicles, the drive belt material may cause abnormal pulley wear. If the vehicle is driven under this condition, the drive belt may become damaged from the worn pulley and detach, affecting electrical charging system and cooling system function and would illuminate the engine warning lamp(s) on the instrument panel. This could result in battery depletion and an overheated engine, resulting in a loss of motive power. Vehicles equipped with a hydraulic power steering system could also experience loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the drive belt, and the pulley will be replaced if it is found worn beyond a certain level.
Details
Certain 2013 model year vehicles with a 6-speed automatic transmission may have been manufactured with insufficient clearance between the power steering pressure tube and the bosses on the converter housing of the automatic transaxle. This may cause the power steering pressure tube to rust from abrasive contact between the two components. In the worst case, a pin hole could develop and allow for power steering fluid leakage, which can result in the loss of power steering assist and increase the risk of crash causing injury and/or property damage. Correction: Dealers will replace the power steering pressure tube and return tube. Note: Only a limited number of 2007 to 2012 model year vehicles equipped with a replacement automatic transaxle with the bosses on the converter housing are included in the recall population.
Details
On certain 2012 to 2014 model year vehicles, due to improper manufacturing of the oil seal boss in certain transfer assemblies, the oil seal can become out of position and allow automatic transmission fluid to enter into the transfer assembly, resulting in reduced automatic transmission fluid pressure in the transaxle. This condition would illuminate the “Automatic Transmission” (A/T) warning light in the instrument panel and could result in the inability to shift gears or to drive the vehicle, increasing the risk of crash causing injury and/or property damage. Correction: Dealers will inspect and, if necessary, replace the transfer assembly. Note: Only a limited number of 2007 to 2010 model year vehicles equipped with a replacement transfer assembly are included in the recall population.
Details
On certain vehicles, the brake booster check valve may stick closed when the engine is shut off. When the vehicle is re-started and put into motion, under certain driving conditions (very slow vehicle manoeuvres), there may be insufficient initial braking assist, which could temporarily increase the stopping distance. This could result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will replace the brake booster check valve.
Details
On certain vehicles, the stop lamp switch may have been contaminated with silicone grease during vehicle assembly. This could prevent proper brake lamp operation. Failure of the brake lamps to illuminate when the brakes are applied may result in the following road users being unaware of the driver's intentions, increasing the risk of a crash causing injury or death. Correction: Dealers will replace the stop lamp switch.
Details
On certain vehicles not equipped with the power seat option, the unused harness connector for the power seat feature is placed directly on the floorboard, underneath the carpeting. If a vehicle occupant enters the vehicle with a sufficient amount of snow on their feet containing road salt, it is possible for the melted snow mixture to soak the carpet and allow the salt-water solution to come into contact with the unused power seat harness connector. As a result, the connector terminal may corrode and allow current to flow, resulting in the gradual heating and melting of the connector. This could result in a vehicle fire, causing personal injury or death. Correction: Dealers will relocate the floor harness beneath both the passenger and driver seats to an area above the carpet.
Translated automatically from the RDW's Dutch text. The original is at the source.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Consequence · Remedy
The multi-rib belt tensioner may be incorrectly constructed. This can lead to excessive tension on the multi-rib belt. The multi-rib belt may come off the pulleys. This can cause the power steering to fail and the engine may overheat. The driver will be warned by the illumination of the engine warning light on the dashboard.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will check the multi-rib belt tensioner and replace it if necessary.
Consequence · Remedy
Due to aging of the adhesive layer, the adhesion between the sunroof glass panel and the sunroof frame may decrease. This can cause the glass panel to become loose. If the glass panel comes loose, it can pose a danger to other road users.
The vehicle owner is requested to make an appointment with a brand dealer. The dealer will replace the sunroof frame and the glass panel.
Consequence · Remedy
Water may enter the windshield wiper motor. This can cause the windshield wiper motor to stop functioning.
The manufacturer is recalling the affected vehicles. Measures will be taken to resolve the defect. The vehicle owner is requested to make an appointment with a brand dealer. The windshield wiper motor will then be replaced.
Consequence · Remedy
The multi-ribbed belt contains material that may cause the guide pulleys to wear unevenly. The multi-ribbed belt may come off the guide pulleys. The power steering pump may fail, requiring more effort to steer the vehicle. Additionally, the vehicle may stall due to loss of tension.
The manufacturer is recalling the affected vehicles. Measures will be taken to resolve the defect. The vehicle owner is requested to contact a brand dealer to make an appointment. The multi-ribbed belt and, if necessary, the tensioner pulleys will then be replaced.
Consequence · Remedy
In cars equipped with LED taillights, the factory-used silicone may disrupt the electrical signal of the brake light switch. This can cause the brake lights to not function when the brake pedal is pressed, posing a danger to following traffic.
The manufacturer is recalling the affected vehicles. Measures will be taken to resolve the defect. The vehicle owner is requested to contact a brand dealer to schedule an appointment. The brake light switch will be replaced, and the power connector will be cleaned.
On the road
Cars of this model first registered in 2008, from official registers. Each figure belongs to its country.
🇳🇱 Vehicle register, Netherlands
1,096 still registered
12% with an open recall
Average list price when new: 42,624 € (Dutch taxes included) · RDW, CC0
Common problems
58 reports🇺🇸 Local dataReported by owners to the source below. It is not a verdict on this car: it is what people wrote.
My abs light and traction light on
Rusted suspension crossbody unsafe to drive. The brakes and calibers seem to always seize as well making this vehicle a death trap no matter how many times I get it fixed.
The contact owns a 2008 Mitsubishi Outlander. The contact stated while driving 30 mph, she heard an abnormal coming from the rear of the vehicle. The contact stated there was no warning light illuminated. The contact drove the vehicle to her residence. The contact took the vehicle to independent mechanic and was infor…
MITSUBISHI HAS A LIMITED RECALL FOR RUSTED CROSSMEMBERS ON 2008+ OUTLANDER SPORTS FROM CERTAIN STATES THAT USED SALT TO TREAT SNOW. MY DAUGHTER'S 2008 OUTLANDER HAS ALWAYS BEEN REGISTERED IN SATELLITE BEACH, FL, A VERY SALTY ATMOSPHERE. THE FRONT WHEELS WOBBLE ON ACCELERATION AND RAPID DECELERATION BECAUSE THE CROSSME…
THE CAR IS A MITSUBISHI OUTLANDER E.S 2008 WITH 42000 MILES ON IT ,AND THE TRANSMISSION IS NOT SHIFTING. I CONTACTED MITSUBISHI MOTORS BUT SINCE 10 YEARS PASSED NOTHING COULD BE DONE.I HAD BEEN SURFING INTERNET AND THERE ARE TOO MANY ISSUES RELATED TO THIS TYPE VEHICLES.
TL* THE CONTACT OWNS A 2008 MITSUBISHI OUTLANDER EQUIPPED WITH GENERAL TIRES, TIRE LINE: GRABBER HTS60, TIRE SIZE: 215/70/R16, DOT NUMBER: VYBAHMFE. THE CONTACT STATED WHILE DRIVING AT VARIOUS SPEEDS, THE TIRE LOSS HALF OF THE AIR PRESSURE. THE CONTACT STATED THAT THE TIRE PRESSURE WARNING LIGHT WAS ILLUMINATED. THE V…
I RECEIVED A RECALL NOTICE FROM MITSUBISHI RELATED TO A CROSS MEMBER OF THE FRAME. THERE WAS A PROBLEM WITH THE VEHICLE AND I TOOK IT IN FOR SERVICE AND THEY DISCOVERED A CORROSION ISSUE WHICH I HAD THEY SERVICE GARAGE FIX AND I PAID FOR THE REPAIR. MITSUBISHI IS DENYING THE CLAIM BECAUSE THEY SAY THAT THERE WAS NO …
WHILE BRAKING, THE DRIVER SIDE BRAKE LIGHT IS ONLY WORKING WHEN THE HEADLIGHTS ARE NOT TURNED ON. I READ UP ON MITSUBISHI RECALLING BRAKE LIGHTS ON OUTLANDERS AND WHEN I LOOK UP MY VIN FOR A RECALL THERE IS NOT ONE ON THERE FOR THAT. THIS IS AN EXTREME ISSUE. LAST YEAR WE HAD IT LOOKED AT, THE WHOLE LIGHT ASSEMBLY REP…
CROSS MEMBER RUSTED THROUGH - UNSAFE TO DRIVE - HAD IT FIXED IN MARCH 2019 AND MITSUBISHI WILL NOT REIMBURSE ME FOR THE OUT OF POCKET COSTS BEFORE THE RECALL WAS ISSUED JULY 2020
WHILE HAVING EXHAUST WORK DONE ON MY 2008 MITSUBISHI OUTLANDER IN MARCH OF 2020, IT WAS DISCOVERED THAT THE FRONT CROSSMEMBER IS RUSTED COMPLETELY THROUGH. THIS VEHICLE HAS THE 2.4L 4-CYLINDER ENGINE. THERE WAS APPARENTLY A RECALL INVOLVING V6 OUTLANDERS FOR THIS ISSUE, BUT NONE FOR THE 4-CYLINDER MODEL FOR WHAT APPEA…
##1ST PROBLEM==I WAS THE CAR AND GOT AN SPEED OF 25MPH AND SUDENNLY THE CAR WONT MOVED FORWARD EVEN IM TRYING TO DEPRESSED THE GAS PEDAL BUT THE SAME IT WONT MOVED FORWARD BUT WHEN I SHOT OFF THE ENGINE AND RE START AGAIN ITS TRHE TIME THAT WILL MOVED FORWARD=== ##2ND PROBLEM==MY WIFE WENT TO PICK UP OUR SON FROM THE …
NOTICED THAT THE CROSSMEMBER HAS ROTTED AWAY AT THE WELD AND NOT SAFE TO DRIVE. ALL OTHER COMPONENTS ARE OK. THERE IS A RECALL FOR 2008 V6 MODELS FOR THE CORROSION, BUT NOT FOR 2008 4 CYL?? IT USES THE SAME DEFECTIVE PARTS BACK IN 2008.
2008 vs. other Outlander years
🇺🇸 Local dataOwner complaints and recall campaigns on record at NHTSA for each model year. Fewer complaints can also mean fewer cars sold or a newer car.
Questions
- What engine does the 2008 Mitsubishi Outlander have?
- The 2008 Mitsubishi Outlander came with 2 engines: 2.4 L 4-cylinder, 3.0 L 6-cylinder.
- What is the fuel economy of the 2008 Mitsubishi Outlander?
- It gets 20 to 22 MPG combined depending on the engine, per the EPA.
- Is the 2008 Mitsubishi Outlander safe?
- ANCAP rates it 5 out of 5 stars.
- Does the 2008 Mitsubishi Outlander have recalls?
- 12 recall campaigns are on record. The latest concerns Structure (2020-05-18).
- What are the common problems of the 2008 Mitsubishi Outlander?
- 58 owners have filed complaints, most often about suspension.
Other years
Other models by Mitsubishi
Do you own a 2008 Outlander?
Post it for free and reach buyers who are already looking at this exact car.
- Free, with no commission
- About three minutes
- Your listing shows up on this page