Infiniti FX35 2003

A tear in the air bag may decrease air bag performance, and increase the risk of injury.

INFINITI will notify owners, and dealers will replace the front passenger air bag module, free of charge. The recall began on April 19, 2021. Owners may contact INFINITI customer service at 1-800-662-6200. INFINITI's number for this recall is R20C2.

An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Nissan will notify owners, and dealers will replace the front passenger air bag inflators with alternate desiccated inflators, free of charge. The recall began February 12, 2020. Owners may contact Nissan customer service at 888-737-9511 or Infiniti customer service at 888-810-3715.

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Nissan will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began December 21, 2017. All owners should receive a second notice by May 15, 2017. Owners may contact Nissan customer service at 1-800-647-7261.

In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

Nissan will notify owners, and dealers will replace the passenger air bag inflator, free of charge. The recall began on June 15, 2015. Owners may contact Nissan customer service at 1-800-647-7261. Note: On December 18, 2015 Nissan informed NHTSA of an amendment of this recall to remove 2004-2005 Infiniti FX35 and FX45 vehicles.

In the event of a crash necessitating deployment of the passenger’s frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

Nissan will notify owners, and dealers will replace the passenger air bag inflator, free of charge. The recall began on June 16, 2015. Owners may contact Nissan customer service at 1-800-647-7261. Note: This recall supersedes recall 14V-701.

THIS STANDARD IS TO REDUCE TRAFFIC ACCIDENTS AND DEATHS AND INJURIES RESULTING FROM TRAFFIC ACCIDENTS, BY PROVIDING ADEQUATE ILLUMINATION OF THE ROADWAY, AND BY ENHANCING THE CONSPICUITY OF MOTOR VEHICLES ON THE PUBLIC ROADS SO THAT THEIR PRESENCE IS PERCEIVED AND THEIR SIGNALS UNDERSTOOD, BOTH IN DAYLIGHT AND IN DARKNESS OR OTHER CONDITIONS OF REDUCED VISIBILITY.

DEALERS WILL REPLACE THE HEADLAMP ASSEMBLIES. THE RECALL BEGAN ON DECEMBER 18, 2006. OWNERS MAY CONTACT INFINITI AT 1-800-662-6200.

THIS STANDARD IS TO REDUCE TRAFFIC ACCIDENTS AND DEATHS AND INJURIES RESULTING FROM TRAFFIC ACCIDENTS, BY PROVIDING ADEQUATE ILLUMINATION OF THE ROADWAY, AND BY ENHANCING THE CONSPICUITY OF MOTOR VEHICLES ON THE PUBLIC ROADS SO THAT THEIR PRESENCE IS PERCEIVED AND THEIR SIGNALS UNDERSTOOD, BOTH IN DAYLIGHT AND IN DARKNESS OR OTHER CONDITIONS OF REDUCED VISIBILITY.

DEALERS WILL REPLACE THE REAR COMBINATION LAMP ASSEMBLIES. THE RECALL BEGAN ON DECEMBER 18, 2006. OWNERS MAY CONTACT INFINITI AT AT 1-800-662-6200.

FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE COULD RESULT IN A FIRE.

DEALERS WILL REPLACE THE FUEL FILLER HOSE. RECALL BEGAN ON FEBRUARY 27, 2006, FOR NISSAN OWNERS, AND ON MARCH 13, 2006, FOR INFINITI OWNERS. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261 OR INFINITI AT 1-800-662-6200.

IF THIS OCCURS, IT WOULD ALLOW THE CALIPER TO ROTATE OR SEPARATE FROM ITS MOUNTING BRACKET. THIS COULD CAUSE THE BRAKE TO FAIL, REDUCING THE VEHICLE'S ABILITY TO STOP. IT COULD ALSO DAMAGE THE WHEEL, CAUSING THE TIRE TO GO FLAT. EITHER ONE OF THESE CONDITIONS COULD RESULT IN A CRASH.

DEALERS WILL TIGHTEN THE FRONT BRAKE CALIPER MOUNTING BOLTS TO ENSURE THAT THEY ARE SECURE. OWNER NOTIFICATION BEGAN ON JANUARY 5, 2004. OWNERS SHOULD CONTACT INFINITI AT 1-800-662-6200.

IF THE BOLTS COME LOOSE, THE PROPELLER SHAFT MAY COME OFF THE VEHICLE WHICH COULD RESULT IN A CRASH.

DEALERS WILL REPLACE THE PROPELLER SHAFT BOLTS AND TIGHTEN THE BOLTS TO THE PROPER SPECIFICATION. OWNER NOTIFICATION BEGAN MAY 27, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT INFINITI AT 1-800-662-6200.

Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the passenger-front airbag inflator. The passenger-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Note: This is an expansion of recall 2015210.

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This recall supersedes recall 2013117. Vehicles corrected as part of the previous campaign will require re-inspection and/or repair.

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator.

Certain vehicles fail to comply with the requirements of CMVSS 108 - Lamps, Reflective Devices and Associated Equipment. The stop, tail, and turn signal lamp function may be too dim when viewed at certain angles. Reduced visibility increases the risk of the vehicle being involved in a crash. Correction: Dealers will replace the rear combination lamps.

Certain vehicles fail to comply with the requirements of CMVSS 108 - Headlamp vertical gradient. Correction: Dealers will install new compliant headlamp assemblies.

On certain vehicles, the fuel filler hose may crack from exposure to ozone. This could cause fuel leakage from the hose while refuelling and the Malfunction Indicator Light (MIL) to illuminate as a result of the onboard diagnostic system detecting a leak in the evaporative emission control system. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: Dealers will replace the fuel filler hose.

On certain vehicles, the tightening torque for the front brake caliper mounting bolts may not be adequate. This could result in the upper mounting bolt coming loose and falling out. If this occurs, it would allow the caliper to rotate on the lower mounting bolt and contact the inside of the road wheel. This would result in noticeable noise and vibration. If the vehicle continues to be driven in this condition, the lower mounting bolt could also come loose and fall out, resulting in separation of the brake caliper from the mounting bracket. This could damage the brake hose to the caliper or damage the road wheel, causing an air leak from the tire. Correction: Dealer will re torque the front brake caliper mounting bolts.

On certain vehicles, the symbol embossed on the tether anchor cover is 2 millimetres smaller than required under CMVSS 210.1(4). These covers have been embossed with the label with a vertical dimension of 18 mm instead of the required 20 mm. Although the symbol is slightly smaller than is required, it is still large enough that it is easily recognized on the cover. The anchor locations are also clearly identified in the owner's manual. No corrective action required.

On certain vehicles, the transmission was replaced before being shipped from the assembly plant. This involved removing and reinstalling the propeller shafts. When the propeller shafts were reinstalled, the tightening torque of some of the attaching bolts may not have been to specification. Therefore, there is a possibility that those bolts may become loose. Correction: Dealer will replace all drive shaft bolts.