Honda Odyssey 2000

In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.

Honda will notify owners, and dealers will inspect the driver frontal air bag inflator, and replace it if necessary, with an inflator of a different design, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1-888-234-2138 or Isuzu customer service at 1-800-255-6727.

In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.

Honda will notify owners, and dealers will inspect the air bags in the vehicles, replacing the driver frontal air bag inflator with an inflator of a different design, as necessary, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1-888-234-2138.

AT NIGHT, THE DRIVER WOULD NOT BE ABLE TO SEE INSTRUMENT PANEL GAUGES AND DISPLAYS.

DEALERS WILL REPLACE THE MULTIPLEX UNIT.

AN IMPROPERLY LATCHED DOOR COULD OPEN UNEXPECTEDLY WHILE THE VEHICLE IS IN MOTION. UNDER CERTAIN CIRCUMSTANCES, A DOOR COULD OPEN COMPLETELY. AN UNRESTRAINED REAR SEAT PASSENGER COULD FALL OUT OF AN OPEN DOOR OF A MOVING VEHICLE AND BE SERIOUSLY INJURED OR KILLED.

DEALERS WILL REPLACE THE DOOR LATCH ASSEMBLY ON ALL ODYSSEY MINVANS BUILT FROM DECEMBER 3, 1999 THROUGH DECEMBER 16, 1999. ALSO INCLUDED IN THIS RECALL ARE APPROXIMATELY 1,612 ODYSSEY MINIVANS THAT HAD THE LATCHES REPLACED UNDER RECALL 99V-158 OR UNDER WARRANTY, THAT MAY NEED TO HAVE THE LATCHES REPLACED AGAIN. OWNERS OF THESE VEHICLES WILL BE NOTIFIED BY HONDA TO BRING THE VEHICLE TO THEIR HONDA DEALER FOR INSPECTION OF THE PREVIOUSLY REPLACED LATCH ASSEMBLY. LATCHES WITH THE SUSPECT DATE CODE WILL BE REPLACED.

IF A FUSE BLOWS, ENGINE POWER, OR OPERATION OF ANY OR ALL ELECTRICAL COMPONENTS, CAN BE LOST, INCLUDING LIGHTS, WINDSHIELD WIPERS, HORN, AND THE ANTI-LOCK FUNCTION OF THE BRAKES. A SUDDEN LOSS OF POWER OR LIGHTING, OR A FAILURE OF THE WINDSHIELD WIPERS OR ANTI-LOCK BRAKE FEATURE IN BAD WEATHER, COULD RESULT.

DEALERS WILL INSTALL A PROTECTIVE COVERING OVER THE WIRE HARNESS AND METAL PIPE TO PREVENT THIS PROBLEM. IF ANY WIRES ARE DAMAGED, THE DEALER WILL MAKE THE NECESSARY REPAIRS, AND THEN INSTALL THE PROTECTIVE COVERING.

THE MISSING WELDS MIGHT AFFECT THE OCCUPANT PROTECTION PERFORMANCE IN A COLLISION.

DEALERS INSPECTED ALL THE VEHICLES AND THEY WERE FOUND TO BE PROPERLY WELDED.

Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: This recall is for airbag inflators that may have been installed when the vehicle had the steering wheel airbag replaced. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.

Issue: On certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety Risk: In a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective Actions: The company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.

On certain vehicles, a dash light dimmer circuit, mounted in the multiplex control unit may be damaged by heat build-up if the dimmer circuit is operated at a setting that is less than full intensity. This would cause a transistor in the module to fail resulting in loss of instrument cluster lighting. Such a condition would prevent the driver from reading the speedometer or other instruments when operating the vehicle in the dark. Correction: Multiplex unit will be replaced.

On certain vehicles, a wire harness located within the engine compartment may be damaged by contact with a metal pipe, possibly resulting in a blown fuse. If a fuse blows, engine power, or operation of any or all electrical components, can be lost, including lights, windshield wipers, horn and the anti-lock function of the brakes. Correction: Dealers will install protective, corrugated plastic tubing over the wire harness and pipe. Any damaged wires will be repaired or replaced.