2006 Honda CR-V
The 2006 Honda CR-V has a 2.4 L engine with 152 hp. It gets 22 MPG combined (20 city, 25 highway), per the EPA. 13 recall campaigns and 398 owner complaints are on record.
Specs
| Cylinders | 4 |
|---|---|
| Transmission | Automatic · 5 speeds |
| Drivetrain | AWD |
| Dimensions (L × W × H) | 4,630 × 1,780 × 1,710 mm (182.3 × 70.1 × 67.3 in) |
| Seats | 5 |
| Body style | Sport Utility Vehicle - 2WD |
For sale in United States
Safety
Crash-test results across markets. They can vary by version and equipment.
Fuel economy (MPG)
🇺🇸 Local dataBy version
| Engine | Transmission | Drivetrain | City | Highway | Combined |
|---|---|---|---|---|---|
| 2.4 L 4-cylinder | Automatic · 5 speeds | AWD | 20 MPG | 25 MPG | 22 MPG |
| 2.4 L 4-cylinder | Automatic · 5 speeds | Front-wheel (FWD) | 20 MPG | 26 MPG | 23 MPG |
| 2.4 L 4-cylinder | Manual · 5 speeds | AWD | 19 MPG | 24 MPG | 21 MPG |
EPA figures for each version sold in the U.S.
Recalls
Consequence · Remedy
If the switch fails, it could overheat and smoke, increasing the risk of a fire.
Honda will notify owners, and dealers will replace the power window master switch and inspect the wiring harness for damage, replacing it if necessary, free of charge. The recall began January 29, 2021. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is P9D.
Consequence · Remedy
If the accelerator pedal binds, the engine may not quickly return to idle after the pedal is no longer pressed, increasing the risk of a crash.
Dorman will notify owners, and qualified service facilities will replace the affected accelerator pedal assemblies, free of charge. The recall began December 9, 2019. Owners may contact Dorman customer service at 1-800-523-2492, using option 5. Dorman's number for this recall is AS1019XXXX.
Consequence · Remedy
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are Q5A and Y58.
Consequence · Remedy
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are E5D and X5C.
Consequence · Remedy
An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began April 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is O41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is U40.
Consequence · Remedy
An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury.
Honda will notify owners, and dealers will inspect and, if necessary, replace the passenger frontal air bag module assembly, free of charge. The recall began June 22, 2018. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are K1P, and M1O.
Consequence · Remedy
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan March 2017. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KD9 and KE0.
Consequence · Remedy
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 27, 2016. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KA0, KA1, KA2, and KA3.
Consequence · Remedy
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on July 1, 2015. Owners may contact Honda customer service at 1-888-234-2138. Owners may contact Acura customer service at 1-800-382-2238, select option 4. Note: Vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to September 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after September 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: This recall fully supersedes recalls 08V-593, 09V-259, 10V-041, 11V-260, 14V-351 and 15V-153. Honda's numbers for this recall are JQ9, JR0, JR1, JR2, JR3, JR4, JR5, JR6, JR7, and JR8.
Consequence · Remedy
If the switch fails, it could overheat, smoke, and cause a fire. A switch failure, and a fire, could occur even if the vehicle is not in use. As a precaution, owners are advised to park outside until the recall repair has been performed.
Honda will notify owners, and dealers will inspect and repair the switches, as necessary, free of charge. The safety recall began on November 2, 2012. Owners may contact Honda at 1-800-999-1009.
Consequence · Remedy
AS A RESULT, A LOSS OF STEERING CAN OCCUR, INCREASING THE RISK OF CRASH.
HONDA WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE PRODUCTION LOT STAMP ON THE PASSENGER-SIDE FRONT LOWER ARM AND, IF NECESSARY, REPLACE THE LOWER ARM, FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT APRIL 17, 2012. OWNERS MAY CONTACT HONDA CUSTOMER SERVICE AT 1-800-999-1009.
Consequence · Remedy
IF THE SWITCH FAILS, THE POWER WINDOWS MAY BECOME INOPERATIVE PREVENTING THEM FROM BEING ROLLED UP OR DOWN. IF THE SWITCH MELTS, IT WILL PRODUCE SMOKE AND A FIRE COULD OCCUR.
HONDA WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE DRIVER SIDE POWER WINDOW SWITCH ASSEMBLY FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT OCTOBER 5, 2011. OWNERS MAY CONTACT HONDA AUTOMOBILE CUSTOMER SERVICE AT 1-800-999-1009.
Consequence · Remedy
THE LANGUAGE IN THE OWNER'S MANUALS IS NOT IN ACCORDANCE WITH THE CURRENT MANDATORY REQUIREMENTS.
HONDA WILL SEND A POSTCARD TO DEALERS AND OWNERS WITH THE CORRECT NHTSA VEHICLE SAFETY HOTLINE INFORMATION AND WITH INSTRUCTIONS TO INSERT THE CARD INTO THE "REPORTING SAFETY DEFECTS" SECTION OF THE OWNER'S MANUAL. THE RECALL BEGAN ON AUGUST 2, 2006. OWNERS MAY CONTACT HONDA AT 1-800-999-1009, ACURA AT 1-800-382-2238 OR HONDA MOTORCYCLES AT 1-866-784-1870.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Details
Issue: On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: This recall only affects certain vehicles that had a Takata airbag inflator installed during a previous airbag recall or collision repair. Safety Risk: In a crash where the airbag deploys, there could be an increased risk of injury. Corrective Action: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.
Details
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Details
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2014567. Correction: Dealers will inspect/replace the driver's frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact: For Honda Owners: 1-877-445-7754 For Acura Owners: 1-877-445-9844
Details
Honda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015225">Click here for more information</a>
Details
On certain vehicles, cleaner residue could infiltrate the master (driver's) power window switch, allowing the switch to overheat and melt. This could result in a vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the master power window switch with an updated version.
Translated automatically from the RDW's Dutch text. The original is at the source.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Consequence · Remedy
The driver's airbag inflator module may build up excessive pressure. If the airbag is deployed, the internal pressure may cause the inflator module to rupture. Metal fragments may be expelled and could potentially injure the occupants.
The vehicle owner is requested to contact the brand dealer or authorized repairer. They will install a different inflator mechanism.
Consequence · Remedy
A short circuit may occur in the window control switch. A short circuit in the switch can lead to the melting of the switch and ultimately to a fire.
The vehicle owner is requested to make an appointment with a brand dealer. The work involves replacing the switch and, if necessary, also the wiring harness in the door.
Consequence · Remedy
The inflator module of the passenger airbag may build up excessive pressure. If the airbag is activated, the internal pressure may cause the inflator module to rupture. Metal fragments can be projected and potentially injure the occupants. Metal fragments can be projected and potentially injure the occupants.
The vehicle owner is requested to contact the brand dealer or an authorized repairer. They will install a different inflator mechanism.
Consequence · Remedy
The inflator module of the passenger airbag may build up excessive pressure. If the airbag is activated, the internal pressure may cause the inflator module to rupture. This can result in metal fragments coming loose and being projected out. Loose metal fragments can injure the occupants.
The manufacturer is recalling the affected vehicles. Measures will be taken to remedy the defect. The vehicle owner is requested to contact the brand dealer or an authorized repairer. They will install a different inflator mechanism.
On the road
Cars of this model first registered in 2006, from official registers. Each figure belongs to its country.
🇳🇱 Vehicle register, Netherlands
254 still registered
19% with an open recall
Average list price when new: 34,188 € (Dutch taxes included) · RDW, CC0
Common problems
398 reports🇺🇸 Local dataReported by owners to the source below. It is not a verdict on this car: it is what people wrote.
Driver side rear trailing arm broke free of the frame. Resulted in sudden loss of control and near accident.
I purchased my vehicle used in 2019 and immediately noticed a loud creaking noise from the front passenger area, especially in colder weather when driving over bumps at low speeds. By 2024, the noise became louder, more frequent, and occurred in all temperatures. In October 2024, I lost control of my vehicle and near…
The contact owns a 2006 Honda CR-V. The contact stated while driving approximately 40 MPH at night, the driver's side low beam headlight had failed to operate as needed. The contact stated that the high-beam headlights operated as needed; however, the driver's side low-beam headlight was inoperable. The contact stated…
Unknown
Extensive undercarriage rust around the frame. It looks like it should’ve been included in the recalls but doesn’t say it is.
Vehicle brakes come on spontaneously while driving, during acceleration in 1st, 2nd and 3rd gear. Seems to be a part of the ABS/VSA system faulty engagement (Anti-Lock Brakes System/Vehicle Stability Assist) since the VSA warning light come on during the fault. Causes vehicle to brake, jerk and buck in middle of road…
The contact owns a 2006 Honda CR-V. The contact stated that while driving at an undisclosed speed and attempting to complete a right turn, he heard an abnormal popping sound coming from the front passenger’s side of the vehicle. The contact also stated that while driving over a bump, the vehicle briefly drifted to the…
I have a 2006 Honda CRV with a little over 297,780 miles. Upon starting the car, the VSA and ABS indicator lights came on along with the VSA warning triangle and would not go off until the engine was turned off. There were no accidents or any noticeable problems with the vehicle while driving on city street under good…
The rear passenger wheel assembly became detached after crossing a small depression in the road. The body/frame had rusted where the two bolts that attached to the wheel assembly. The entire frame and body has rusted underneath the car.
My transmission went out
stabilizer bars broken Honda dealer reports frame is badly rusted
wiring harness electrical
2006 vs. other CR-V years
🇺🇸 Local dataOwner complaints and recall campaigns on record at NHTSA for each model year. Fewer complaints can also mean fewer cars sold or a newer car.
Questions
- What engine does the 2006 Honda CR-V have?
- The 2006 Honda CR-V has a 2.4 L engine with 152 hp.
- What is the fuel economy of the 2006 Honda CR-V?
- It gets 22 MPG combined (20 city, 25 highway), per the EPA.
- Does the 2006 Honda CR-V have recalls?
- 13 recall campaigns are on record. The latest concerns Visibility (2020-12-10).
- What are the common problems of the 2006 Honda CR-V?
- 398 owners have filed complaints, most often about exterior lighting.
Other years
Other models by Honda
Do you own a 2006 CR-V?
Post it for free and reach buyers who are already looking at this exact car.
- Free, with no commission
- About three minutes
- Your listing shows up on this page