Ford Explorer 2000

A VEHICLE FIRE COULD OCCUR WITH OR WITHOUT THE ENGINE RUNNING.

FORD WILL NOTIFY OWNERS THAT DEALERS WILL INSTALL A FUSED WIRING HARNESS IN LINE WITH THE SCDS. ON 1999-2003 WINDSTAR VEHICLES WITH A LEAKING SCDS, DEALERS WILL ALSO INSPECT THE ABS CONTROL MODULE CONNECTOR AND REPAIR AS NECESSARY. REPAIRS WILL BE COMPLETED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 27, 2009. OWNERS MAY CONTACT FORD AT 1-888-222-2751.

DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.

DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.

DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.

SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.

THIS COULD RESULT IN AN UNDERHOOD FIRE.

DEALERS WILL INSTALL A FUSED WIRING HARNESS. OWNERS OF THE PASSENGER CARS INCLUDED IN THIS CAMPAIGN WILL BE INSTRUCTED TO RETURN THEIR VEHICLES TO THEIR DEALERS TO HAVE THE SPEED CONTROL DEACTIVATION SWITCH DISCONNECTED AS AN INTERIM REPAIR. AS SOON AS REPAIR PARTS ARE AVAILABLE (EXPECTED OCTOBER 2007), OWNERS WILL BE INSTRUCTED TO RETURN TO THE DEALERS FOR INSTALLATION OF A FUSED WIRING HARNESS. THE RECALL BEGAN ON AUGUST 13, 2007, AND MAILING COMPLETED BY SEPTEMBER 19, 2007. OWNERS MAY CONTACT FORD AT 1-888-222-2751.

FAILURE OF THIS CONNECTION COULD LEAD TO FUEL SPILLAGE AND, IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.

UFI WILL NOTIFY OWNERS AND REPLACE THE FILTERS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 4, 2006. OWNERS MAY CONTACT UFI FILTERS USA AT 800-230-5876.

WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.

PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.

THE DRIVER COULD POTENTIALLY LOSE CONTACT WITH THE STEERING WHEEL OR FOOT PEDALS DURING SUCH AN EVENT, INCREASING THE RISK OF A CRASH.

DEALERS WILL REPLACE THE DRIVER SEAT UPPER BOLT WITH A METAL SPACER AND BOLT. IN ADDITION, SEATS WITH TUBULAR BACK FRAMES WILL HAVE THE FULLY THREADED LOWER RECLINER BOLT REPLACED WITH A PARTIALLY THREADED BOLT. OWNER NOTIFICATION BEGAN ON AUGUST 29, 2003. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.

THE THROTTLE RETURN SPRING FORCE MAY NOT BE SUFFICIENT TO OVERCOME THE BINDING CONDITION WHEN THE SPEED CONTROL IS DISENGAGED. BRAKING FUNCTION WOULD BE MAINTAINED THOUGH STOPPING DISTANCES MAY BE INCREASED.

DEALERS WILL INSPECT THE SPEED CONTROL CABLE AND, IF NECESSARY, REPLACE IT. OWNER NOTIFICATION BEGAN AUGUST 29, 2003. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.

THIS OVERHEATING CONDITION CAN CAUSE THE RUNNING BOARD TO MELT OR CAUSE A FIRE.

DEALERS WILL REPLACE THE WIRING HARNESS ON THESE RUNNING BOARDS. OWNER NOTIFICATION BEGAN MARCH 7, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT SOUTHERN COMFORT AT 1-800-745-6096.

SHOULD THE TREAD SEPARATE AT HIGHWAY SPEEDS, A VEHICLE CRASH COULD OCCUR, POSSIBLY RESULTING IN PERSONAL INJURY OR DEATH.

THE REPLACEMENT/REIMBURSEMENT PROGRAM FOR THIS CAMPAIGN EXPIRED ON MARCH 31, 2002. HOWEVER, CUSTOMERS CAN CONTACT FORD AT 1-877-917-3673 OR GO ON-LINE TO WWW.FORD.COM FOR POSSIBLE ASSISTANCE.

OPERATING THE VEHICLE ABOVE THE MAXIMUM SPEED RATING COULD LEAD TO A TIRE FAILURE WHICH AT THESE SPEEDS COULD RESULT IN A CRASH.

DEALERS WILL REPROGRAM THE POWERTRAIN CONTROL MODULE.

IF THE TREAD SEPARATES FROM THE TIRE, THE DRIVER CAN LOSE CONTROL OF THE VEHICLE, POSSIBLY RESULTING IN A CRASH CAUSING INJURY OR DEATH.

THE REPLACEMENT/REIMBURSEMENT PROGRAM FOR THIS CAMPAIGN EXPIRED ON AUGUST 29, 2001. HOWEVER, CUSTOMERS SHOULD CONTACT FIRESTONE CUSTOMER SERVICE AT 1-800-465-1904 FOR POSSIBLE ASSISTANCE.

IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANT MAY NOT BE PROPERLY RESTRAINED.

DEALERS WILL INSPECT THE DATE CODE ON CERTAIN SEAT BELT BUCKLES OF YOUR VEHICLE AND REPLACE ALL SEAT BELT BUCKLES THAT FALL WITHIN THE SUSPECT DATE CODE RANGE. OWNER NOTIFICATION BEGAN OCTOBER 26, 2000. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.

INADVERTENT SIDE AIR BAG DEPLOYMENT COULD CAUSE PERSONAL INJURY TO THE SEAT OCCUPANT.

DEALERS WILL REPLACE THE SIDE CRASH SENSORS WITH A REVISED DESIGN THAT WILL REDUCE THE LIKELIHOOD OF AN UNEXPECTED SIDE AIR BAG DEPLOYMENT.

AN INOPERATIVE WINDSHIELD WIPER SYSTEM COULD AFFECT DRIVER VISIBILITY, INCREASING THE RISK OF A CRASH.

DEALERS WILL INSTALL A RESISTOR IN THE GEM CIRCUIT.

Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Dealers will install a new switch or fused wiring harness. Note: This is an expansion of recall 2005028 (05S28) for vehicles not previously included in the campaign.

On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The failure mode appears to be different than that of Recall 2005028 (05S28). This time, the concern is with long term durability performance issues causing the switch to fail. Correction: Initially as an interim repair, owners will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected. As soon as replacement parts are available, owners will be instructed to return to the dealers for installation of a fused wiring harness designed to eliminate the potential risk of fire.

On certain Explorer, Explorer Sport and Explorer Sport Trac vehicles, the upper bolt on the driver's high back seat that attaches the seat recliner mechanism to the seat back frame could fracture. If this happens, the seat back may recline until it makes contact with an object behind the seat, such as the 2nd row seat cushion. The occupant could potentially lose contact with the steering wheel or foot pedals during such an event. Correction: Dealer will replace the driver's seat upper bolt.

On certain Explorer, Explorer Sport and Explorer Sport Tract vehicles, the speed control cable strand cover could impact the conduit end fitting during speed control engagement. Repeated instance of this may result in flaring the cover end causing a binding condition when speed control is disengaged. Drivers may experience a high idle or a condition where it would appear speed control would not disengage. Braking function would be maintained though stopping distances may be increased. Correction: Dealer will replace the speed control cable.

On certain Explorer, Explorer Sport and Explorer Sport Trac vehicles, the upper bolt on the driver's high back seat that attaches the seat recliner mechanism to the seat back frame could fracture. If this happens, the seat back may recline until it makes contact with an object behind the seat, such as the 2nd row seat cushion. The occupant could potentially lose contact with the steering wheel or foot pedals during such an event. Correction: Dealer will replace the driver's seat upper bolt.

On certain vehicles, the Powertrain Control Module may allow the vehicle to exceed the design intent top speed. At these extreme speeds. the vehicle may be capable of exceeding the speed rating of the tires. This could lead to tire failure and at these extreme speeds, may result in a crash. Correction: Powertrain Control Module will be reprogrammed with the latest calibration.

Certain Explorer Sport, Explorer Sport Trac, Rander Edge and Ranger XLT vehicles may have a wire formed hood striker that may be susceptible to fatigue fractures. If the hood striker fractures, the hood may fly open while the vehicle is being driven. A hood fly-up while the vehicle is being operated may result in resuced driver visibility and, potentially, a vehicle crash. Correction: Hood striker will be replaced with a revised hood striker.

Certain vehicles do not comply with the requirements C.M.V.S.S. 209 - Seat Belt Assemblies. The seat belt assemblies may not withstand the force requirements of the standard. In a crash, if the belt buckle fails, there is an increased risk of injury to the occupant. Correction: Belt buckle assemblies will be inspected and replaced if necessary.

Certain vehicles have a revised level side crash sensor that may deploy the side airbag if the ignition is in the "run" position and the seat belt webbing is forcibly extracted from a locked retractor with a jerking motion. If the side airbag deploys unexpectedly, it could potentially result in personal injury. Correction: Side crash sensors will be replaced with a revised design version which will reduce the likelihood of an unexpected side airbag deployment.

On certain vehicles, the generic electronic module (GEM) may experience a condition referred to as "lock-up" in which the GEM controlled functions (front windshield wipers, interior lights, 4X4 system etc.) could not be turned ON or, in some cases if the function in ON, it could not be turned OFF. During this lock-up condition, these functions remain in their last known operating mode and do not respond to driver commands until electrical power is interrupted to the GEM. An inoperative front windshield wiper system could adversely affect driver visibility. Correction: Dealers will install a resistor in the GEM circuit which will prevent the electronic noise on the diagnostic link from affecting the GEM during vehicle operation.

Certain vehicles do not comply with the requirements of CMVSS 108 - Lighting System and Retroreflective Devices. A design change removal of a fog lamp circuit relay allows the fog lamps to be activated with the headlamp switch in the OFF position and the tail lamps, side marker lamps, parking lamps and licence plate lamps not illuminated. Correction: Dealers will install a relay and wring overlay on affected vehicles.