BMW X5 2001

An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

Owners are advised not to drive their vehicles until the remedy is complete. Dealers will inspect and replace the driver's front air bag, as necessary, free of charge. Owner notification letters were mailed December 29, 2025. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning December 23, 2025. This recall expands previous NHTSA recall number 19V015.

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

Owners are advised not to drive their vehicles until the vehicle has been remedied. BMW will notify owners, and dealers will inspect the driver side air bag module, replacing it as necessary, free of charge. The recall began March 15, 2017. Owners may contact BMW customer service at 1-800-525-7417.

THIS COULD INITIALLY CAUSE SOME BRAKE FLUID LEAKAGE, AND EVENTUALLY LEAD TO A SUBSTANTIAL LOSS OF BRAKE FLUID. THERE COULD BE A NOTICEABLE REDUCTION IN BRAKE PERFORMANCE IF A LOSS OF FRONT BRAKE PERFORMANCE OCCURS.

DEALERS WILL INSTALL AN ADDITIONAL RETAINING CLIP TO FURTHER SECURE THE BRAKE LINE TO THE FRONT STRUT. ADDITIONALLY, IF INSPECTION OF ANY BRAKE HOSE INDICATES THAT IT HAS EXPERIENCED DAMAGE, THE HOSE WILL BE REPLACED. OWNER NOTIFICATION BEGAN FEBRUARY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.

EVENTUALLY, THE BRAKE PEDAL ARM COULD DETACH FROM THE BRACKET, RENDERING THE SERVICE BRAKING SYSTEM INEFFECTIVE, INCREASING THE RISK OF A CRASH.

DEALERS WILL CHECK THE BRAKE PEDAL ARM PIVOT SHAFT FOR PROPER SEATING IN ITS SUPPORT BRACKET. IN ADDITION, A PIN WILL BE INSTALLED TO SECURE THE SHAFT TO THE BRACKET. OWNER NOTIFICATION BEGAN AUGUST 14, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-332-4269.

IF THIS WERE TO OCCUR, ENGINE OVERHEATING AND SUBSEQUENT ENGINE DAMAGE COULD RESULT. IN ADDITION, IT IS POSSIBLE FOR THE FAILURE OF THE ELECTRICAL CIRCUITRY TO CAUSE A FIRE IN THE FAN CONTROL UNIT LOCATED IN THE FRONT OF THE ENGINE COMPARTMENT.

DEALERS WILL REPLACE THE FAN. OWNER NOTIFICATION BEGAN SEPTEMBER 28, 2001. THIS IS A SUPPLEMENT TO A RECALL THAT BEGAN DURING SEPTEMBER 2001 (SEE RECALL CAMPAIGN 01V206). OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.

IF THIS WERE TO OCCUR, ENGINE OVERHEATING AND SUBSEQUENT ENGINE DAMAGE COULD RESULT. IN ADDITION, IT IS POSSIBLE FOR THE FAILURE OF THE ELECTRICAL CIRCUITRY TO CAUSE A FIRE IN THE FAN CONTROL UNIT LOCATED IN THE FRONT OF THE ENGINE COMPARTMENT.

DEALERS WILL REPLACE THE FAN. OWNER NOTIFICATION BEGAN SEPTEMBER 28, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.

IF THIS PROBLEM OCCURS, THE ABILITY TO MAINTAIN SPEED IN TRAFFIC AND/OR ACCELERATE COULD BE GREATLY DIMINISHED, POSSIBLY LEADING TO A CRASH.

DEALERS WILL REPLACE THE TRANSMISSION GEAR POSITION INDICATOR SWITCH. OWNER NOTIFICATION BEGAN AUGUST 14, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.

IF THIS OCCURRED, THE EFFECTIVE BRAKE PEDAL TRAVEL COULD BE REDUCED DUE TO RELATIVE MOVEMENT BETWEEN THE PEDAL AND BOOSTER. BRAKING PERFORMANCE WHILE DRIVING COULD BE ADVERSELY AFFECTED. IN ADDITION, IT IS POSSIBLE THAT THE BOOSTER COULD DEVELOP A LEAK AFTER AN EXTENDED PERIOD OF TIME RESULTING IN A REDUCTION IN BRAKE POWER ASSIST.

DEALERS WILL INSPECT THE TWO LOCK NUTS TO DETERMINE IF THEY ARE PROPERLY SEATED. IF THE NUTS ARE NOT PROPERLY SEATED OR ARE CROSS-THREADED, THE BRAKE BOOSTER WILL BE REPLACED. OWNER NOTIFICATION BEGAN AUGUST 17, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.

IN SUCH A CASE, THE BOLTS COULD ULTIMATELY LOOSEN CAUSING THE PULLEY TO THROW OFF THE DRIVE BELT. THIS WOULD RESULT IN THE LOSS OF CERTAIN ENGINE AUXILIARY FUNCTIONS, I.E., POWER STEERING ASSIST, WATER PUMP, OR ALTERNATOR. STEERING EFFORT WOULD THEN BE INCREASED.

DEALERS WILL INSPECT THE POWER STEERING PUMP PULLEY TO SEE IF IT IS LOOSE. IF THE PULLEY IS NOT LOOSE ON THE PUMP, THE RETAINING BOLTS WILL BE TORQUED TO SPECIFICATION. IF THE PULLEY IS LOOSE, THE PUMP, PULLEY, ATTACHING BOLTS, AND DRIVE BELT WILL BE REPLACED. OWNER NOTIFICATION BEGAN AUGUST 17, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.

THIS COULD RESULT IN A LOSS OF STEERING CAPABILITY AND INCREASING THE RISK OF A CRASH.

DEALERS WILL INSPECT THE SPINDLE TO ENSURE PROPER INSERTION IN THE COUPLING, AND, IF NECESSARY, THE SPINDLE WILL BE FULLY INSERTED AND THE FASTENING BOLT REPLACED. OWNER NOTIFICATION BEGAN FEBRUARY 6, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.

IF THIS WERE TO OCCUR, LOSS OF STEERING CONTROL COULD RESULT.

DEALERS WILL INSPECT AND RE-TORQUE THE NUT SECURING THE AXIAL JOINT OF THE LEFT STEERING TIE ROD. IF THE TORQUE OF THE NUT IS FOUND TO BE LOOSE, THE RIGHT NUT WILL ALSO BE CHECKED AND CORRECTED IF NECESSARY, AND A FRONT WHEEL ALIGNMENT WILL BE PERFORMED.

IN THE EVENT OF A CRASH, THE SAFETY BELT SYSTEM MIGHT NOT BE ABLE TO PROVIDE ITS MAXIMUM RESTRAINT FUNCTION.

DEALERS WILL INSPECT THE BOLTS AND CORRECT THE TORQUE IF NECESSARY.

Issue: This recall applies to vehicles that may be equipped with a replacement sport steering wheel that has a Takata airbag. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: To reduce the safety risk, BMW advises you not to drive the vehicle until the recall repairs have been completed. BMW will notify owners by mail and advise you to contact a dealership to arrange for an inspection and, if necessary, replacement of the driver-front airbag module. To learn if your vehicle is affected by this recall, owners may: • Visit <a href= https://www.bmw.ca/en/ssl/VehicleRecall.html> https://www.bmw.ca/en/ssl/VehicleRecall.html</a> • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002

Issue: 2023 Update - BMW has updated this recall and issued a do not drive advisory for all vehicles that that not yet been repaired. Some vehicles may contain a replacement sport steering wheel with a Takata driver-front air bag module. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: BMW advises not to drive your vehicle unless this recall repair has been completed. BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. To learn if your vehicle requires repair, owners may: • Visit https://www.bmw.ca/en/ssl/VehicleRecall.html • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002

Issue: 2023 Update - BMW has updated this recall and issued a do not drive advisory for all vehicles that that not yet been repaired. This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: BMW advises not to drive your vehicle unless this recall repair has been completed. BMW will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. To learn if your vehicle requires repair, owners may: • Visit https://www.bmw.ca/en/ssl/VehicleRecall.html • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002

Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.

On certain vehicles, the grommet holding the brake line to the front struts may slip out of its bracket. Consequently, the brake hose attached to the brake line may come in contact with the tire and be subject to wear and abrasion. This could cause some brake fluid leakage which would eventually illuminate the brake warning indicator light. If a loss of front brake performance occurs, the rear brake circuit will still be functional, and will be able to slow and stop the vehicle. Correction: Dealer will install an additional retaining clip in order to further secure the line and grommet to the strut.

On certain passenger vehicles the brake pedal arm pivot shaft could loosen from its support bracket. Eventually, the brake pedal arm could detach from the bracket, rendering the braking system ineffective, increasing the risk of a crash. Correction: Dealers will check the brake pedal arm pivot shaft for proper seating in its support bracket. In addition, a pin will be installed to secure the shaft to the bracket.

Certain passenger vehicles. The engine auxiliary/cooling fan operation, including variable speed, is electronically controlled. Failure of the fan motor can cause the electrical circuitry of the fan control unit to overload and fail, causing the fan to stop operating. If this were to occur, engine overheating and subsequent engine damage could result. In addition, it is possible for the failure of the electrical circuitry to cause a fire in the fan control unit located in the front of the engine compartment. Correction: Dealers will replace the fan.

On certain vehicles, the lower end of the upper steering spindle may not have been inserted completely into the aluminum u-joint assembly (coupling). In such a case, the fastening bolt used to secure the connection may not completely engage the spindle within the coupling. This would make it possible for the spindle to disconnect from the coupling, resulting in loss of steering capability and a possible crash. Correction: Spindle will be inspected for proper insertion into the coupling. If necessary, the spindle will be fully inserted and the fastening bolt replaced.

On certain vehicles, the safety belt lower outboard anchorage bolt on the driver's and front passenger's seats may not have been secured properly. In the event of a crash, the safety belt system might not be able to provide its maximum restraint function. Correction: Dealers will inspect the bolts and correct the torque if necessary.

On certain vehicles, the nut that secures the axial joint of the left steering tie rod to the steering gear box may not have been tightened securely. This could lead to loosening of the nut and, initially to steering wheel play and/or misalignment, as well as noise from the steering linkage. If vehicle operation continues, the tie rod could disconnect from the steering gear box. If this were to occur, loss of steering control could result. Correction: Dealers will inspect and re-torque the nut securing the axial joint of the left steering tie rod. If the torque of the nut is found to be loose, the right nut will also be checked and corrected if necessary, and a front wheel alignment will be performed.

Due to aging effects in the gas generator of the driver's airbag, a too high pressure can occur during activation. The internal pressure in the gas generator may become too high during activation. The gas generator can explode and metal parts may cause injury, possibly fatal injuries under certain conditions.

The vehicle owner is invited to make an appointment with the brand dealer. They will replace the airbag module.

The gas generator of the driver's airbag may experience malfunctions if it has been exposed to high absolute humidity and high temperature fluctuations over the years. If the driver's airbag deploys normally, the internal pressure in the gas generator may become too high. In the worst-case scenario, the gas generator may explode and metal parts could cause injury under certain conditions.

The vehicle owner is requested to contact the brand dealer. The relevant airbag will be replaced.

Due to a defect in the gas generator of the driver's airbag, it may deploy uncontrollably in the event of a collision. Metal parts may be released and shot towards the occupants. If the defect occurs and the airbag is activated due to an accident, the airbag will not provide protection, posing a risk of injury to the occupants from the flying metal parts.

The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is invited to make an appointment with the brand dealer. The dealer will replace the driver's airbag.