2016 Volvo V40
The 2016 Volvo V40 has a 2.0 L engine with 150 hp. 1 recall campaigns are on record.
Specs
| Cylinders | 4 |
|---|---|
| Drivetrain | Front-wheel (FWD) |
| Dimensions (L × W × H) | 4,370 × 1,783 × 1,458 mm (172.0 × 70.2 × 57.4 in) |
| Curb weight | 1,328 kg (2,928 lb) |
| Seats | 5 |
Specs: average of the cars of this model first registered in 2016 in the Netherlands (RDW vehicle register).
For sale in United States
Recalls
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Consequence · Remedy
The capless fuel filler insert in the fuel system is inadequately waterproof, allowing rainwater to enter the fuel system during heavy rain. This could lead to corrosion of the fuel system, causing engine stalling or difficulty starting the engine, or even fuel leakage.
Install a water cover on all vehicles' capless fuel filler inserts to prevent rainwater intrusion. Additionally, inspect the fuel filter for any rainwater contamination in the fuel system. If there is contamination or corrosion, replace the affected parts.
Translated automatically from the RDW's Dutch text. The original is at the source.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Consequence · Remedy
The cooling system is not self-bleeding. As a result, during repair and maintenance work, trapped air may remain in the cooling system if work is not done properly. This can cause the EGR cooler and housing to overheat or melt. Risk of fire in the engine compartment.
The vehicle owner is requested to make an appointment with a brand dealer. They will then install a bleed hose in the cooling system.
Consequence · Remedy
There may be insufficient cooling of the engine parts due to trapped air in the cooling system after it has been filled. Insufficient cooling can cause damage to the engine parts and a risk of fire in the engine compartment.
The brand dealer will install an additional bleed hose.
Consequence · Remedy
There may be insufficient cooling of the engine parts due to trapped air in the cooling system after it has been filled. Insufficient cooling can cause damage to the engine parts and a risk of fire in the engine compartment.
The brand dealer will install an additional bleed hose.
Consequence · Remedy
The cooling system is not self-bleeding. As a result, air may remain in the cooling system during repair and maintenance work if not performed correctly. This can cause the EGR cooler and housing to overheat or melt, leading to a fire in the engine compartment.
The vehicle owner is requested to make an appointment with a brand dealer. They will install a bleeding hose in the cooling system.
Consequence · Remedy
The engine management calibration software may not operate optimally under all driving conditions, driving styles (exhaust gas temperature and flow), in every climate, and with different fuel properties. The plastic intake manifold may deform in rare cases, and in the worst case, local fire may occur.
The vehicle owner is invited by letter to have a software update performed at the Volvo dealer.
Consequence · Remedy
The software of the engine management does not work optimally under all conditions. This can cause contamination in the intake system and may cause the plastic intake manifold to deform and melt. Poor engine performance/stalling may occur, leading to a risk of fire near the engine.
The vehicle owner is requested to make an appointment with a brand dealer. They will install updated software and clean the sensors.
Consequence · Remedy
The software of the engine management does not function optimally under all conditions. This can lead to contamination in the intake system and the deformation and melting of the plastic intake manifold. This may cause the engine to run poorly or stall, and potentially lead to a fire near the engine.
The vehicle owner is requested to make an appointment with a brand dealer. They will install modified software, clean the sensors, and adjust the cooling system of the exhaust gas recirculation, the EGR system.
Consequence · Remedy
The engine management software does not work optimally under all conditions. This can lead to contamination in the air intake duct and the plastic intake manifold may deform and melt. There can be a loss of engine power and a risk of fire in the engine compartment.
The vehicle owner is informed about the possible defect, danger, and the remedy that is still being developed. Once the remedy is available, the vehicle owner will be approached again for repair.
Consequence · Remedy
The engine management calibration software may not work optimally under all driving conditions, driving styles (exhaust gas temperature and flow), in every climate, and with different fuel properties. This may lead to increased soot deposits in the engine. The plastic intake manifold may, in rare cases, deform, potentially causing local fires in the engine.
The vehicle owner is requested by letter to have the car adjusted at the Volvo dealer.
Consequence · Remedy
There may be cracking in the fuel line. Fuel leakage.
The manufacturer will take measures. The vehicle owner is requested to make an appointment with a brand dealer. The fuel line will then be replaced.
Consequence · Remedy
The igniters for the driver, passenger, and side airbags are improperly manufactured. As a result, the airbags do not function as intended. The airbags may not deploy.
The manufacturer is recalling the affected vehicles. Steps will be taken to fix the defect. The vehicle owner is requested to make an appointment with a brand dealer. They will replace the affected airbags.
Consequence · Remedy
The tires of the vehicle have a speed index of H, 210 km/h. This is lower than the required speed index of V for 230 km/h. Using the tires at high speed can lead to damage and blowouts.
The manufacturer recalls the affected vehicles. Measures will be taken to remedy the defect. The vehicle owner is requested to make an appointment with the brand dealer. They will install tires with the correct speed index.
Consequence · Remedy
Due to a manufacturing defect in the gas generator, the driver's airbag may not deploy fully. If the airbag does not deploy fully during a collision, personal injury may occur.
The manufacturer is recalling the affected vehicles. Steps will be taken to fix the defect. The vehicle owner is invited to make an appointment with a brand dealer. The dealer will replace the driver's airbag.
On the road
Cars of this model first registered in 2016, from official registers. Each figure belongs to its country.
🇳🇱 Vehicle register, Netherlands
3,215 still registered
2% with an open recall
Average list price when new: 32,430 € (Dutch taxes included) · RDW, CC0
2016 vs. other V40 years
🇺🇸 Local dataOwner complaints and recall campaigns on record at NHTSA for each model year. Fewer complaints can also mean fewer cars sold or a newer car.
Questions
- What engine does the 2016 Volvo V40 have?
- The 2016 Volvo V40 has a 2.0 L engine with 150 hp.
- Does the 2016 Volvo V40 have recalls?
- 1 recall campaigns are on record. The latest concerns Fuel system (2021-11-16).
Other years
Other models by Volvo
Do you own a 2016 V40?
Post it for free and reach buyers who are already looking at this exact car.
- Free, with no commission
- About three minutes
- Your listing shows up on this page