- Home
- Toyota
- Prius Plug-in
- 2012
2012 Toyota Prius Plug-in
The 2012 Toyota Prius Plug-in has a 1.8 L engine. It gets 50 MPG combined (51 city, 49 highway), per the EPA. NHTSA NCAP rates it 4 out of 5 stars. 6 recall campaigns and 713 owner complaints are on record.
Specs
| Cylinders | 4 |
|---|---|
| Transmission | CVT (continuously variable) |
| Drivetrain | Front-wheel (FWD) |
| Length | 3,264 mm (128.5 in) |
| Width | 48 mm |
| Curb weight | 1,400 kg (3,086 lb) |
| Seats | 5 |
| Body style | Midsize Cars |
Specs: average of the cars of this model first registered in 2012 in the Netherlands (RDW vehicle register).
For sale in United States
Safety
Crash-test results across markets. They can vary by version and equipment.
Fuel economy (MPG)
🇺🇸 Local dataRecalls
Consequence · Remedy
If the hybrid system shuts down unexpectedly, it can increase the risk of a crash.
Toyota will notify owners, and dealers will update the software for the motor/generator control electronic control unit (ECU) and the hybrid control ECU as necessary, free of charge. The recall began January 22, 2019. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0V. Note: The software updates in this recall are needed even if the vehicle had the software previously updated under recalls 14V-053 or 15V-449.
Consequence · Remedy
If either portion of the curtain shield air bag inflator ejects into the passenger cabin, there is an increased risk of injury to vehicle occupants.
Toyota will notify owners, and dealers will install retention brackets to the curtain shield air bags, free of charge. The recall began on October 17, 2016. Owners may contact Toyota Customer Service Department at 1-800-331-4331. Toyota's number for this recall is Toyota G0U, and Lexus GLJ.
Consequence · Remedy
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Consequence · Remedy
The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. The hybrid system could also shut down completely resulting in a vehicle stall, increasing the risk of a crash.
Toyota will notify owners and dealers will update the software for both the motor/generator control electronic control unit (ECU) and the hybrid control ECU, free of charge. If an owner experiences a failure of the inverter before the vehicle receives updated software, the dealer will repair or replace the inverter assembly with a new one at no charge. The recall began on March 21, 2014. Owners may contact Toyota at 1-800-331-4331.
Consequence · Remedy
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Consequence · Remedy
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Details
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Details
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Details
On certain vehicles, the Intelligent Power Module (IPM), which is part of the hybrid drive system, could become damaged under certain driving conditions. This could cause various warning lights to illuminate on the instrument panel of the vehicle and cause a reduction or loss of motive power, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will update motor/generator and hybrid control ECU software and affect repairs as necessary. Note: This recall supersedes recalls 2014-042 and 2015-312. Vehicles repaired under the previous recall(s) will require repair.
Details
On certain plug-in hybrid vehicles, the electric vehicle (EV) hybrid battery's fuse could be subjected to excessive thermal stress and potentially fracture if the vehicle is operated by the electric motor under high-load driving conditions, such as during a long ascent. This would illuminate warning lights and warning messages in the instrument cluster, and in some cases cause the vehicle to enter a fail-safe mode resulting in reduced motive power. In other cases, the hybrid system could shut down, resulting in loss of motive power, which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the EV fuse with a new one of an improved design.
Details
On certain vehicles, a defect in the curtain shield airbags could cause the inflator to fail, releasing pressurized gas into the airbag, partially inflating it. If this occurs, parts of the inflator could also separate from the vehicle structure, entering the interior of the vehicle. Should this occur when occupants are in the vehicle, unintended airbag deployment could startle the driver, and airbag inflator parts could come into contact with the occupants, increasing the risk of injury and a crash. Correction: Dealers will install a retention bracket which will prevent the inflator parts from entering the vehicle interior.
Details
On certain vehicles, the Intelligent Power Module (IPM), which is part of the hybrid system inverter assembly, could become damaged under certain driving conditions. This could cause various warning lights to illuminate in the instrument panel of the vehicle and cause a reduction or loss of motive power, increasing the risk of a crash causing injury and/or property damage. Correction: Dealers will update motor/generator and hybrid control ECU software and affect repairs as necessary. Note: This recall is superseded by recall 2018546. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018546">recall 2018546</a> for more information.
Common problems
713 reports🇺🇸 Local dataReported by owners to the source below. It is not a verdict on this car: it is what people wrote.
I own a 2012 Toyota Prius with approximately 132,000 miles. I first experienced problems with the braking system approximately one year ago, in 2025. The ABS, brake, and other warning lights began illuminating intermittently, and I experienced occasional hesitation in braking response. I was concerned enough about the…
When I started my car this morning, the red BRAKE light, ABS warning light and anti-slip light were all illuminated. The car does still stop but the brakes are very spongy and there's a clicking noise under the hood. I only moved the car out of the driveway to allow other cars to leave. The brake fluid is not low. Thi…
1. My Brake booster failed/malfunctioned. I had to get it repaired/replaced by Toyota so it might be with the dealership or thrown out by now. 2. I had to take it in because I had an incident where I was unable to apply the break on the car. I was lucky enough to be in a not busy street and was able to pull over safel…
The contact owned a 2012 Toyota Prius. The contact stated that while making a left turn at 10 MPH, another vehicle crashed into the vehicle and t-boned the front passenger's side door of the vehicle. The air bags did not deploy. There was no warning light illuminated. After the impact, the front windshield slowly crac…
Brake warning lights on, buzzing sound every 10 seconds. Likely a known actuator and master cylinder issue
Brake lights icons stay on mechanic at Toyota dealership state need new brak master cylinder and booster
Unknown. There were a multitude of codes that appeared on the diagnostics causing problems with engine. The temperature, brake, tire sensor lights are all on. The cruise control is not working. White smoke emitting from tail pipe and engine. Main engine coolant leaking. Car overheating rapidly.
My 2012 Toyota Prius is experiencing brake actuator pump failure, presenting diagnostic trouble codes C1253 (brake actuator pump motor stuck/locked) and C1256 (brake actuator pump motor overcurrent). These codes trigger ABS, brake, and VSC warning lights and disable ABS and stability control. Toyota previously acknowl…
The power brake unit and actuator are failing.
Almost had an accident due to the brake master, actuator and booster pump assemblies, failing. There were no warning lights alerting me to an issue. Just lost ability to break and car shut off completely while in motion.
The brake booster and brake booster pump assembly (also referred to as the Accumulater or Accentuater) have failed in my vehicle the same as Toyota's known defect that was mentioned in their Customer Support Program 20TE07 (part numbers can be found within the filing of their CSP 20TE07). I am reporting that this issu…
2012 Prius with 174,344 miles in great condition, with regularly scheduled oil changes. ABS/Break Actuator failure on freeway with no warning other than a beep a few seconds before the breaks disappeared completely. Break pads changed 4 months ago and new wheels installed as well. This is a known problem with Toyot…
2012 vs. other Prius Plug-in years
🇺🇸 Local dataOwner complaints and recall campaigns on record at NHTSA for each model year. Fewer complaints can also mean fewer cars sold or a newer car.
Questions
- What engine does the 2012 Toyota Prius Plug-in have?
- The 2012 Toyota Prius Plug-in has a 1.8 L engine.
- What is the fuel economy of the 2012 Toyota Prius Plug-in?
- It gets 50 MPG combined (51 city, 49 highway), per the EPA.
- Is the 2012 Toyota Prius Plug-in safe?
- NHTSA NCAP rates it 4 out of 5 stars.
- Does the 2012 Toyota Prius Plug-in have recalls?
- 6 recall campaigns are on record. The latest concerns Hybrid propulsion system (2018-10-04).
- What are the common problems of the 2012 Toyota Prius Plug-in?
- 713 owners have filed complaints, most often about service brakes.
Other years
Other models by Toyota
Do you own a 2012 Prius Plug-in?
Post it for free and reach buyers who are already looking at this exact car.
- Free, with no commission
- About three minutes
- Your listing shows up on this page