2008 Mercury Milan
The 2008 Mercury Milan came with 2 engines: 2.3 L 4-cylinder, 3.0 L 6-cylinder. It gets 20 to 23 MPG combined depending on the engine, per the EPA. 5 recall campaigns and 451 owner complaints are on record.
Specs
| Cylinders | 4 |
|---|---|
| Transmission | Automatic · 5 speeds |
| Drivetrain | Front-wheel (FWD) |
| Body style | Midsize Cars |
For sale in United States
Safety
Crash-test results across markets. They can vary by version and equipment.
Fuel economy (MPG)
🇺🇸 Local dataBy version
| Engine | Transmission | Drivetrain | City | Highway | Combined |
|---|---|---|---|---|---|
| 2.3 L 4-cylinder | Automatic · 5 speeds | Front-wheel (FWD) | 20 MPG | 28 MPG | 23 MPG |
| 2.3 L 4-cylinder | Manual · 5 speeds | Front-wheel (FWD) | 20 MPG | 29 MPG | 23 MPG |
| 3.0 L 6-cylinder | Automatic · 6 speeds | AWD | 17 MPG | 25 MPG | 20 MPG |
| 3.0 L 6-cylinder | Automatic · 6 speeds | Front-wheel (FWD) | 18 MPG | 26 MPG | 21 MPG |
EPA figures for each version sold in the U.S.
Recalls
Consequence · Remedy
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Ford will notify owners, and dealers will replace the driver-side airbag inflator or module with an alternate one, free of charge. Owner notification letters were mailed on April 9, 2021 for the passenger side, and November 14, 2022 for the driver side. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S12.
Consequence · Remedy
If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.
Consequence · Remedy
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Interim letters informing owners of the recall and that parts are not yet available began mailing March 1, 2017. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Consequence · Remedy
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Ford mailed interim letters informing owners that parts are not yet available on July 15, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Consequence · Remedy
The floor mat could shift such that it could interfere with the accelerator pedal, preventing its return to an idle position, which could result in unintended vehicle speeds, increasing the risk of a crash.
Ford will notify owners, and dealers will install new replacement mats, free of charge. The recall began in July 2014. Owners may contact Ford's customer service at 1-800-392-3673. Ford's number for this recall is 14S07. NOTE: Vehicles built after October 31, 2010, while potentially equipped with the same floor mats, are equipped with a Brake Over Accelerator (BOA) feature that prevents simultaneous accelerator and brake application, allowing the vehicle to be safely stopped by pressing firmly and steadily on the brake pedal.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Details
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Ford will notify owners by mail. The corrective actions for this recall are under development. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Details
Issue: On certain cars, a problem with the hydraulic control unit for the anti-lock brake system (ABS) could cause increased brake pedal travel. Safety Risk: Increased brake pedal travel could increase the risk of a crash. Corrective Actions: The company will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to inspect the ABS module assembly. The system will be flushed with DOT 4 brake fluid, and if necessary, the hydraulic control unit will be replaced. Dealers will also replace the DOT 3 reservoir cap with a new DOT 4 cap.
Details
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional note: This recall supersedes recalls 2016-347 (Ford Safety Improvement Program 16S26), 2017-024 (Ford Recall 17S01) and 2018-035 (Ford Recall 18S01). Vehicles repaired under the previous recalls do not require repair under this recall.
Details
Ford Canada is conducting a voluntary Safety Improvement Program involving passenger airbag inflators in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States equipped with Takata airbags. Ford will replace the driver or passenger inflator on affected vehicles, depending on the vehicle involved. Owners who believe their vehicles may have been originally purchased or registered in the states of New Jersey, Delaware, District of Columbia, Maryland, Pennsylvania, Ohio, Indiana, Illinois, Virginia, West Virginia, Kentucky, Missouri, Nebraska, Kansas, Oklahoma, Arkansas, Tennessee, North Carolina, Nevada, Arizona, New Mexico, California, Texas, Louisiana, Mississippi, Alabama, Georgia, South Carolina, Florida, Hawaii, Puerto Rico or the U.S. Virgin Islands should contact a Ford dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Program is superseded by recall 2019005 (Ford Recall 19S01). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019005">recall 2019005</a> for more information.
Common problems
451 reports🇺🇸 Local dataReported by owners to the source below. It is not a verdict on this car: it is what people wrote.
08 merc milan abs did not work and brakes failed almost causing major accidents. I used e brake to stop. Brakes went to floor. Been calling for and dealerships for recalls I find out now about abs malfunctioning noone will fix or get back to me. Leaking brake fluid all around abs module now. Dealerships saying they no…
There is a problem with my tourqe converter with 100k miles. My car won't accelerate.
P205/60R16
The ABS brake function checked out during the recall window on Nov. 2 of 2021. The Ford dealer mechanics purged the brake system with fresh fluid and tested the function. Tested OK. The car was used without issue until recently and now the brake pedal goes down nearly to the floor before the brakes engage. It is shock…
The gas pedal gets stuck at the top when I go to press down on it allowing the car to keep driving when I am trying to stop the car.
Brakes are failing even after they have been serviced. Unsafe car to drive
Was not able to drive my car because you had to press the breaks all the way to the ground in order for the vehicle to attempt to stop. A recall was issued for the hydraulic breaks in 2019 and no parts were available for almost a year. Car has been at the dealership being repaired since August 12, but now they are tel…
In March 2021 I received important safety recall from Ford advising me that the Airbag inflator might explode in the event of a crash and may cause injury or death to the driver or passengers. My daughter still drives this car, why have they not followed up and replaced this part?
The contact owns a 2008 Mercury Milan. The contact stated while driving 25-30 MPH, the brake pedal was depressed but went all the way to the floorboard and failed to respond. The contact was unsure whether there was a warning light illuminated. The contact stated that she coasted the vehicle on a hill and turned off t…
I took the vehicle in earlier this year for the recall on the Brake system. They bled the brakes and said it was fine but now the brakes are just like they were before taking it in. I would assume that the HCU is bad but they did not want to change it out when they had it.
RE: NHTSA Campaign Number: 19V904000 Manufacturer Ford Motor Company Components SERVICE BRAKES, HYDRAULIC Vehicle regarding complaint: 2008 Mercury Milan Vehicle Vin: [XXX] Good day, In September of 2021 I took the above mentioned vehicle in for the above stated recall regarding the Hydraulic control unit. The …
For several years, my vehicle has had an issue with "extended brake pedal travel," making it more difficult to come to a stop with a reasonable effort, and increasing the likelihood of an accident. My vehicle has already been repaired for a prior recall regarding "extended brake pedal travel" (this "repair" did not f…
2008 vs. other Milan years
🇺🇸 Local dataOwner complaints and recall campaigns on record at NHTSA for each model year. Fewer complaints can also mean fewer cars sold or a newer car.
Questions
- What engine does the 2008 Mercury Milan have?
- The 2008 Mercury Milan came with 2 engines: 2.3 L 4-cylinder, 3.0 L 6-cylinder.
- What is the fuel economy of the 2008 Mercury Milan?
- It gets 20 to 23 MPG combined depending on the engine, per the EPA.
- Does the 2008 Mercury Milan have recalls?
- 5 recall campaigns are on record. The latest concerns Air bags (2021-03-10).
- What are the common problems of the 2008 Mercury Milan?
- 451 owners have filed complaints, most often about air bags.
Other years
Other models by Mercury
Do you own a 2008 Milan?
Post it for free and reach buyers who are already looking at this exact car.
- Free, with no commission
- About three minutes
- Your listing shows up on this page