2010 Dodge Ram
The 2010 Dodge Ram came with 3 engines: 3.7 L 6-cylinder, 4.7 L 8-cylinder, 5.7 L 8-cylinder. It gets 15 to 16 MPG combined depending on the engine, per the EPA. 13 recall campaigns are on record.
Specs
| Cylinders | 8 |
|---|---|
| Transmission | Automatic · 5 speeds |
| Drivetrain | 4x4 |
| Dimensions (L × W × H) | 5,870 × 2,020 × 1,880 mm (231.1 × 79.5 × 74.0 in) |
| Wheelbase | 3,675 mm (144.7 in) |
| Curb weight | 2,650 kg (5,842 lb) |
| Body style | Standard Pickup Trucks 2WD |
Dimensions and weight: median of the 24 versions in Canada's official specifications (NHTSA vPIC). Each version differs slightly.
For sale in United States
Other Dodge cars for sale in United States
Fuel economy (MPG)
🇺🇸 Local dataBy version
| Engine | Transmission | Drivetrain | City | Highway | Combined |
|---|---|---|---|---|---|
| 3.7 L 6-cylinder | Automatic · 4 speeds | Rear-wheel (RWD) | 14 MPG | 20 MPG | 16 MPG |
| 4.7 L 8-cylinder | Automatic · 5 speeds | 4x4 | 13 MPG | 18 MPG | 15 MPG |
| 4.7 L 8-cylinder | Automatic · 5 speeds | Rear-wheel (RWD) | 14 MPG | 19 MPG | 15 MPG |
| 5.7 L 8-cylinder | Automatic · 5 speeds | 4x4 | 13 MPG | 18 MPG | 15 MPG |
| 5.7 L 8-cylinder | Automatic · 5 speeds | Rear-wheel (RWD) | 14 MPG | 20 MPG | 16 MPG |
EPA figures for each version sold in the U.S.
Recalls
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Details
Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.
Details
On certain vehicles, the front fuel tank strap may become loose or detached due to corrosion of the frame bracket. This could result in the front of the fuel tank to lower, potentially allowing the front of the tank to make contact with the ground, which could increase the risk of a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: Dealers will install a reinforcement bracket onto the frame.
Details
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Details
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2015-003. Correction: Dealers will replace airbag inflators. All vehicles having received a replacement inflator as part of the previous special service campaign will have a replacement inflator installed.
Details
On certain vehicles equipped with 6.7L diesel engines, an electrical connection at the fuel heater could overheat, potentially rendering the heater inoperative and causing a fuel leak and fuel odour. Fuel leakage, in the presence of an ignition source, could result in a fire causing injury and/or damage to property. Correction: Dealers will inspect the fuel heater, and replace it if required, as well as replace the fuel heater wiring harness electrical connector.
Details
On certain 2008-2012 Ram 2500 and 3500 4x4, Ram 3500 cab chassis, and 2008 Ram 1500 Mega Cab 4x4 vehicles, the left outer tie rod ball stud could fracture, potentially resulting in a loss of vehicle control and a crash causing injury and/or property damage. Correction: Dealers will install a redesigned left outer tie rod assembly. Note: This recall supersedes recall 2011-253 (L16). Vehicles that were repaired under the previous campaign will also need to be repaired under this campaign.
Details
Certain Ram 4500 and 5500 four wheel drive vehicles may experience a fracture of the ball stud on the left outer tie rod assembly, potentially resulting in a loss of vehicle control and a crash causing injury and/or property damage. Correction: As an interim repair, dealers will align the left tie rod end. Dealers will install a redesigned left outer tie rod assembly once parts are available. Note: This recall supersedes recall 2010-465 (K28). Vehicles that were repaired under the previous campaign will also need to be repaired under this campaign.
Details
On certain vehicles, the rear axle pinion nut could loosen and allow the rear driveshaft to detach from the axle, or fully detach from the vehicle. Pinion nut separation could also cause the rear axle differential to fail suddenly, causing rear wheel lockup. These issues could result in loss of propulsion, danger to other road users, loss of vehicle control and possible crash causing property damage and/or personal injury. Correction: Dealers will install a pinion nut retainer.
Details
On certain vehicles built between July 1, 2009 and November 30, 2009, the rear axle pinion nut may have been incorrectly manufactured and could loosen. If the pinion nut was to separate from the pinion, the rear driveshaft could become detached from the rear axle, or fully detached from the vehicle. Pinion nut separation could also cause the rear axle differential to fail suddenly, causing rear wheel lockup. These issues could result in loss of propulsion, danger to other road users, loss of vehicle control and possible crash causing property damage and/or personal injury. Correction: Dealers will install a pinion nut retainer.
Details
On certain 2008-2011 Ram 2500 and 3500 4x4, Ram 3500 cab chassis 4x2 and 4x4, and 2008 Ram 1500 Mega Cab 4x4 vehicles, the left outer tie rod ball stud could fracture. Additionally, other 2003-2008 Ram vehicles may have received the affected tie rod as a replacement part during service, and are therefore also involved in this campaign. Although this condition tends to occur when making a tight turn during low speed parking lot type maneuvers, tie rod failure could result in a loss of directional stability. A loss of steering control could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the left outer tie rod end and tighten the track bar bolt. Note: The tie rod replacement portion of this recall was superseded by recall 2013-396.
Details
Certain vehicles may have an improperly formed master cylinder to hydraulic control unit brake tube assembly end-flare that could lead to a loss of brake fluid and reduced braking performance. This could increase stopping distances, possibly resulting in a crash causing property damage and/or personal injury. Correction: Dealers will replace the suspect brake tubes.
Details
Certain vehicles equipped with automatic transmission may have been built with a Wireless Ignition Node (WIN) module exhibiting a binding condition of the solenoid latch. This may result in a condition where the Ignition key can be removed from the WIN module prior to placing the shifter in PARK. This could result in unintended vehicle movement, which may cause property damage, personal injury or death. Correction: Dealers will inspect and, if necessary, replace the WIN module.
Details
On certain vehicles, the brake booster input rod may have been installed without the retaining clip, or in some cases, with an improperly formed retaining clip. Should the input rod separate from the assembly it could lead to a loss of brakes, which could result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will install or replace the retaining clips.
Translated automatically from the RDW's Dutch text. The original is at the source.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Consequence · Remedy
The front securing strap of the fuel tank may possibly become loose due to corrosion of the mounting bracket. Contact between the fuel tank and the ground increases the risk of fuel leakage.
The vehicle owner is invited to make an appointment with a brand dealer. The dealer will install a reinforcement bracket for the fuel tank strap. When the old strap of the fuel tank has come loose from the original mounting bracket, the front and rear fuel tank straps will be replaced. For recognized brand dealers see: Klintberg & Way AB : www.kwauto.com/dealer/
Consequence · Remedy
The electrical plug connection of the diesel fuel heater may overheat. This can cause the O-ring seals of the plug connection to fail. Fuel leakage may occur, which can lead to smoke and fire in the engine compartment.
The manufacturer recalls the affected vehicles. Measures will be taken to correct the defect. The vehicle owner is invited to make an appointment with a brand dealer. They will replace the electrical plug connections of the diesel fuel heater and inspect the housings of the fuel filter/heater unit, replacing them if necessary. For authorized Chrysler / Dodge / Ram dealers see: AGT Europe Automotive Import SA: www.agtauto.com/find-a-dealer/ or: Auto Export Corporation: www.aeceurope.com/haendler or: Klintberg & Way AB: www.kwauto.com/dealer
Consequence · Remedy
The securing nut of the pinion shaft in the rear differential may possibly come loose. The rear wheels may no longer be driven and/or the rear axle may lock up.
The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is invited to make an appointment with a brand dealer. The dealer will inspect the pinion shaft nut. If the nut has come loose and/or the rear axle has locked up, the differential will be revised. If the nut has not come loose, it will be secured with a locking mechanism. For recognized brand dealers see: Klintberg & Way AB : www.kwauto.com/dealer/
2010 vs. other Ram years
🇺🇸 Local dataOwner complaints and recall campaigns on record at NHTSA for each model year. Fewer complaints can also mean fewer cars sold or a newer car.
Questions
- What engine does the 2010 Dodge Ram have?
- The 2010 Dodge Ram came with 3 engines: 3.7 L 6-cylinder, 4.7 L 8-cylinder, 5.7 L 8-cylinder.
- What is the fuel economy of the 2010 Dodge Ram?
- It gets 15 to 16 MPG combined depending on the engine, per the EPA.
- Does the 2010 Dodge Ram have recalls?
- 13 recall campaigns are on record. The latest concerns Other (2019-08-21).
Other years
Other models by Dodge
Do you own a 2010 Ram?
Post it for free and reach buyers who are already looking at this exact car.
- Free, with no commission
- About three minutes
- Your listing shows up on this page