1. Home
  2. BMW
  3. X6
  4. 2013

2013 BMW X6

The 2013 BMW X6 came with 2 engines: 3.0 L 6-cylinder turbo, 4.4 L 8-cylinder turbo. It gets 14 to 19 MPG combined depending on the engine, per the EPA. 6 recall campaigns are on record.

Standard Sport Utility Vehicle 4WD AWD
None for sale in United States yet
Selling one? Post it free, it shows up on this page. Sell yours
BMW X6
Representative photo of the X6. It may show a different year or version. Photo: IFCAR · Public domain · Wikimedia Commons · resized and cropped

Specs

Engine
4,400 cc
8
Cylinders8
TransmissionAutomatic · 8 speeds
DrivetrainAWD
Dimensions (L × W × H)4,890 × 1,980 × 1,700 mm (192.5 × 78.0 × 66.9 in)
Wheelbase2,930 mm (115.4 in)
Curb weight2,305 kg (5,082 lb)
Body styleStandard Sport Utility Vehicle 4WD

Dimensions and weight: median of the 2 versions in Canada's official specifications (NHTSA vPIC). Each version differs slightly.

For sale in United States

No 2013 BMW X6 for sale in United States yet Do you own one? Post it free and reach buyers who are already looking at this exact car.
Sell your X6

Other BMW cars for sale in United States

Fuel economy (MPG)

🇺🇸 Local data
City
14 MPG
Highway
20 MPG
Combined
16 MPG
Emissions
340 g/km
CO₂

By version

EngineTransmissionDrivetrainCityHighwayCombined
3.0 L 6-cylinder turbo Automatic · 8 speeds AWD 16 MPG 23 MPG 19 MPG
4.4 L 8-cylinder turbo Automatic · 8 speeds AWD 14 MPG 20 MPG 16 MPG
4.4 L 8-cylinder turbo Automatic · 6 speeds AWD 12 MPG 17 MPG 14 MPG

EPA figures for each version sold in the U.S.

Recalls

6 campaigns🇨🇦 CA dataTransport Canada

It may not apply to vehicles sold in your country. Check with your VIN at the source.

Label 2024544 · 2024-08-15 · Transport Canada
Details

Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.

Airbag 2020008 · 2020-01-15 · Transport Canada
Details

Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Airbag 2019018 · 2019-01-15 · Transport Canada
Details

Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

Powertrain 2017113 · 2017-03-03 · Transport Canada
Details

Certain vehicles may have been manufactured with defective front driveshaft universal joint seals, which could allow water and/or dirt to enter the universal joint, causing accelerated wear and/or corrosion, and resulting in vibration. If the vehicle continues to be operated in this state, the universal joint could eventually break, potentially damaging surrounding components and rendering the vehicle inoperative. This could increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will replace the front drive shaft. Note: This is an expansion of recall 2016-226.

Airbag 2016142 · 2016-03-31 · Transport Canada
Details

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.

Steering 2012178 · 2012-06-12 · Transport Canada
Details

On certain vehicles, the steering gear was manufactured incorrectly and, as a result, a steering fluid leak could develop. Loss of power steering fluid could cause a loss of steering power assist, which may result in a crash. Also, power steering fluid leakage may contact a hot engine or exhaust component, which could cause a fire. These issues could result in property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the steering gear assembly.

1 campaign🇳🇱 NL dataRDW

Translated automatically from the RDW's Dutch text. The original is at the source.

It may not apply to vehicles sold in your country. Check with your VIN at the source.

Air bags, Seat belts MGP230194 · 2023-05-11 · RDW
Consequence · Remedy

The gas generator of the driver's airbag and the passenger airbag can potentially explode uncontrollably when activated due to aging. After activation in a collision, metal parts can end up in the interior and may cause fatal injuries to the occupants.

The vehicle owner is requested to contact the brand dealer. The airbags will be replaced.

On the road

Cars of this model first registered in 2013, from official registers. Each figure belongs to its country.

🇬🇧 Annual roadworthiness test (MOT), Great Britain

21% failed the test the first time

Better than average All cars first registered in 2013: 32%

1,236 tests in 2023 · average 147,708 km · DVSA, OGL v3

2013 vs. other X6 years

🇺🇸 Local data

Owner complaints and recall campaigns on record at NHTSA for each model year. Fewer complaints can also mean fewer cars sold or a newer car.

Which BMW X6 year to buy? Recalls and complaints by year

Questions

What engine does the 2013 BMW X6 have?
The 2013 BMW X6 came with 2 engines: 3.0 L 6-cylinder turbo, 4.4 L 8-cylinder turbo.
What is the fuel economy of the 2013 BMW X6?
It gets 14 to 19 MPG combined depending on the engine, per the EPA.
Does the 2013 BMW X6 have recalls?
6 recall campaigns are on record. The latest concerns Label (2024-08-15).

Other years

Other models by BMW

Share

Do you own a 2013 X6?

Post it for free and reach buyers who are already looking at this exact car.

  • Free, with no commission
  • About three minutes
  • Your listing shows up on this page
Post for free