2013 BMW X1
The 2013 BMW X1 came with 2 engines: 2.0 L 4-cylinder turbo, 3.0 L 6-cylinder turbo. It gets 21 to 27 MPG combined depending on the engine, per the EPA. 7 recall campaigns are on record.
Specs
| Cylinders | 4 |
|---|---|
| Transmission | Automatic · 8 speeds |
| Drivetrain | AWD |
| Dimensions (L × W × H) | 4,450 × 1,800 × 1,550 mm (175.2 × 70.9 × 61.0 in) |
| Wheelbase | 2,760 mm (108.7 in) |
| Curb weight | 1,728 kg (3,810 lb) |
| Body style | Large Cars |
Dimensions and weight: median of the 2 versions in Canada's official specifications (NHTSA vPIC). Each version differs slightly.
For sale in United States
Other BMW cars for sale in United States
Fuel economy (MPG)
🇺🇸 Local dataBy version
| Engine | Transmission | Drivetrain | City | Highway | Combined |
|---|---|---|---|---|---|
| 2.0 L 4-cylinder turbo | Automatic · 8 speeds | AWD | 22 MPG | 32 MPG | 26 MPG |
| 2.0 L 4-cylinder turbo | Automatic · 8 speeds | Rear-wheel (RWD) | 24 MPG | 33 MPG | 27 MPG |
| 3.0 L 6-cylinder turbo | Automatic · 6 speeds | AWD | 18 MPG | 26 MPG | 21 MPG |
EPA figures for each version sold in the U.S.
Recalls
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Details
Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.
Details
Issue: On certain vehicles, fluid from the positive crankcase ventilation (PCV) system could leak on the intake air hose. As a result, the fluid could enter the electrical connector for the water pump and cause a short circuit. Safety Risk: A short circuit can create the risk of a fire, even while the vehicle is parked and turned off. Corrective Actions: To reduce the safety risk, BMW advises you to park your vehicle outdoors and away from other vehicles or structures until the recall repairs are completed. BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the water pump and electrical connector. The dealer will also install a shield on the connector.
Details
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Details
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the driver-front airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Details
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.
Details
On certain vehicles, a defect in manufacturing could result in a loss of oil supply to the vacuum pump. If this were to occur, the vacuum pump could fail, causing a loss of power assist to the braking system. This could cause increased stopping distances, possibly resulting in a crash causing injury and/or damage to property. Correction: Dealers will install a camshaft seal disk locking ring. Note: This is an expansion of recall 2013-330.
Details
On certain vehicles, a defect in manufacturing could result in a loss of oil supply to the vacuum pump. If this were to occur, the vacuum pump could fail, causing a loss of power assist to the braking system. This could cause increased stopping distances, possibly resulting in a crash causing injury and/or damage to property. Correction: Dealers will install a camshaft seal disk locking ring.
Translated automatically from the RDW's Dutch text. The original is at the source.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Consequence · Remedy
The gas generator in the driver airbag may crack. When an airbag is activated during an accident, the gas generator may break. Metal parts can cause fatal injuries under certain conditions. BMW strongly advises not to use your vehicle!
The vehicle owner is requested to contact the brand dealer before further use of the vehicle; they will replace the airbag.
Consequence · Remedy
There may be malfunctions in the gas generator of the driver’s airbag if it has been exposed to high absolute humidity and high temperature fluctuations over the years. In the event of airbag activation after a collision, excessive pressure may occur in the gas generator, and if it explodes, the flying metal parts can cause serious injuries or even death.
The vehicle owner is requested to contact the authorized dealer. The relevant airbag will be replaced.
Consequence · Remedy
The previously replaced gas generator of the driver's airbag may, under the influence of moisture and heat, build up too much pressure again during activation, causing metal parts to come loose and fly out. This can injure the driver and passengers.
Replacement of the driver's airbag.
Consequence · Remedy
The previously replaced gas generator of the driver's airbag may, under the influence of moisture and heat, build up too much pressure again during activation, causing metal parts to come loose and fly out. This can injure the driver and passengers.
Replacement of the driver's airbag.
Consequence · Remedy
Due to a manufacturing defect in the intake camshaft, there is a possibility that the oil supply to the vacuum pump is insufficient. The vacuum pump can become damaged due to inadequate lubrication. The vacuum necessary for the brake booster may then no longer be available. As a result, brake assistance may fail.
The manufacturer is recalling the affected vehicles. Measures will be taken to remedy the defect. The vehicle owner is invited to make an appointment with a brand dealer. The intake camshaft will be checked. If necessary, it will be adjusted or the intake camshaft and vacuum pump will be replaced.
Consequence · Remedy
Due to a manufacturing defect in the intake camshaft, the oil supply to the vacuum pump may be insufficient. The vacuum pump may be damaged due to poor lubrication. The vacuum necessary for brake assistance may then no longer be available. As a result, brake assistance may fail.
The manufacturer recalls the affected vehicles. Measures are taken to resolve the defect. The vehicle owner is invited to make an appointment with the brand dealer. The intake camshaft will be checked and adjusted. If necessary, the intake camshaft and vacuum pump will be replaced.
On the road
Cars of this model first registered in 2013, from official registers. Each figure belongs to its country.
2013 vs. other X1 years
🇺🇸 Local dataOwner complaints and recall campaigns on record at NHTSA for each model year. Fewer complaints can also mean fewer cars sold or a newer car.
Questions
- What engine does the 2013 BMW X1 have?
- The 2013 BMW X1 came with 2 engines: 2.0 L 4-cylinder turbo, 3.0 L 6-cylinder turbo.
- What is the fuel economy of the 2013 BMW X1?
- It gets 21 to 27 MPG combined depending on the engine, per the EPA.
- Does the 2013 BMW X1 have recalls?
- 7 recall campaigns are on record. The latest concerns Label (2024-08-15).
Other years
Other models by BMW
Do you own a 2013 X1?
Post it for free and reach buyers who are already looking at this exact car.
- Free, with no commission
- About three minutes
- Your listing shows up on this page