Toyota Matrix 2004

UNA VISIBILIDAD DE LUZ DISMINUIDA PUEDE RESULTAR EN UN ACCIDENTE VEHICULAR.

SABERSPORT NOTIFICARÁ A LOS PROPIETARIOS Y OFRECERÁ UN REEMBOLSO TOTAL POR LAS LÁMPARAS DE COMBINACIÓN NO CONFORMES. EL RETIRO DE SEGURIDAD COMENZÓ EL 11 DE MAYO DE 2009. LOS PROPIETARIOS PUEDEN CONTACTAR A SABERSPORT AL 1-909-598-7589.

EL VIDRIO DE LA PUERTA PUEDE SEPARARSE DEL REGULADOR DE VENTANAS, ATASCARSE Y ESTALLAR DURANTE LA OPERACIÓN DE LAS VENTANAS ELÉCTRICAS, CAUSANDO DISTRACTIÓN AL CONDUCTOR Y/O LESIONES.

LOS CONCESIONARIOS REEMPLAZARÁN LOS PERNOS DEL VIDRIO DE LA PUERTA DEL CONDUCTOR Y DEL PASAJERO FRONTAL POR PERNOS DE NUEVO DISEÑO SIN CARGO. EL RECALL COMENZÓ EL 16 DE ABRIL DE 2008 PARA PROPIETARIOS DE TOYOTA. EL RECALL COMENZÓ EL 21 DE MAYO DE 2008 PARA PROPIETARIOS DE PONTIAC. LOS PROPIETARIOS PUEDEN CONTACTAR A TOYOTA AL 1-888-270-9371 O A PONTIAC AL 1-800-620-7668.

SIN LOS REFLECTORES AMBAR, EL VEHÍCULO ESTARÁ MAL ILUMINADO, LO QUE PODRÍA RESULTAR EN UN CHOQUE DEL VEHÍCULO.

ANZO NOTIFICARÁ A LOS PROPIETARIOS Y REEMPLAZARÁ LOS FAROS SIN CARGO. EL RECALL COMENZÓ EL 9 DE MAYO DE 2006. LOS PROPIETARIOS PUEDEN CONTACTAR A ANZO USA AL 909-468-3688.

Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.

On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag assembly. <br><br> Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Matrix model vehicles may have had the original front passenger airbag inflator replaced as a “like-for-like” replacement under a previous recall as a temporary remedy while evaluating a permanent remedy. These vehicles will receive the permanent remedy passenger airbag assembly under this recall.

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes recalls 2013113, 2014224, 2015197 and 2015269. Correction: All vehicles having not received a replacement inflator as part of the previous recall will now have a replacement inflator installed by dealers. For Matrix model vehicles, dealers may replace the front passenger airbag assembly with one equipped with a newly specified inflator.

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>

On certain vehicles, a defect in the supplemental restraint system could result in an inadvertent deployment of the front airbag(s) and/or seatbelt pretensioner(s). Unintended seatbelt pretensioner and/or airbag deployment, in a non-warranted (non-impact) situation, could startle the driver, which could result in a vehicle crash causing property damage and/or personal injury. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants. Correction: Dealers will replace the airbag control module and may install an in-line jumper wiring harness to correct the issue. Note: This recall supersedes recalls 2013032 and 2014097. Vehicles that were repaired under the previous campaign and did not receive a new airbag control module will also need to be repaired under this campaign.

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>

On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2016103">Click here for more information</a>

On certain vehicles, a defect in the supplemental restraint system could result in an inadvertent deployment of the front airbag(s) and/or seatbelt pretensioner(s). Unintended seatbelt pretensioner and/or airbag deployment, in a non-warranted (non-impact) situation, could startle the driver, which could result in a vehicle crash causing property damage and/or personal injury. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants. Correction: Dealers will install an in-line jumper wiring harness to correct the issue.

On certain vehicles, the regulator bolts - which attach the front side window glass to the power window regulator - may become loose, causing a loud noise to be generated when the window is raised or lowered. If the window is continuously operated in this condition, the bolts may eventually separate, causing the glass to become misaligned, and in the worst case, allowing the glass to completely shatter. Correction: Dealers will replace the flange bolts