Tesla Model S 2014

Issue: A previous over-the-air (OTA) software update could cause the vehicle not to display the correct visual warning indicators when there are problems with the brake system or when the parking brake is applied. As a result, the BRAKE, PARK, and antilock brake system (ABS) visual indicators would display as text instead of symbols. Safety Risk: While there is a low risk to safety, Canadian regulations require visual warnings to use common symbols, instead of words, to avoid driver confusion. Corrective Actions: Tesla will notify affected owners by email. Tesla has released an over-the-air software update to fix this problem. There is no further action required if your vehicle has software release 2024.3.25, 2024.14.5, or a release later than 2024.14.5.

Issue: On vehicles equipped with the Autosteer advanced driver-assistance feature, when using the feature, the vehicle may not provide strong enough warnings or monitor the driver closely enough to prevent misuse of the feature. Safety Risk: A driver that doesn't pay close attention while using the Autosteer feature or who doesn't react quickly when Autosteer is canceled could have an increased risk of a crash. Corrective Actions: Tesla will notify owners by email and supply an over-the-air software update to improve driver monitoring and alerts while using the Autosteer feature. Tesla advises that you must always pay attention and be ready to take control of the vehicle at any time while using the Autosteer advanced driver-assistance feature.

Issue: On certain vehicles, the front trunk (frunk) hood latch may not be positioned properly. As a result, the secondary latch may not hold the hood closed. This could cause the hood to open suddenly while driving if the primary hood latch is released. Safety Risk: A hood that opens suddenly while driving could block the driver's view and increase the risk of a crash. Corrective Actions: Tesla will notify owners by e-mail and arrange for an inspection of the secondary hood latch. If the hood doesn't latch properly, Tesla Service will reassemble and reposition the latch mechanism.

Issue: On certain vehicles, the internal memory for the media control unit (MCU) could run out of storage capacity over time. If this happens, the center display can turn off while driving and cause some of the car's systems not to work properly. This includes the rearview camera display, defrost/defog control settings, and exterior turn signal lighting. Safety Risk: A rearview camera image that does not display could reduce a driver's ability to see behind the vehicle while backing up. A windshield that cannot be defrosted/defogged could reduce visibility. Turn signals that do not work could cause a following driver not to recognize that a vehicle ahead intends to turn. These conditions could increase the risk of a crash. Corrective Actions: Tesla advises owners to ensure that their vehicle software is up to date. Tesla will notify owners by email, including when parts are available to schedule service to upgrade the internal memory in the MCU.

Issue: On certain vehicles, when switching the distance display setting from kilometers to miles, the speedometer displays the vehicle speed in miles per hour (mph) only. Canadian regulations require that speed be displayed in either kilometers per hour (km/h) or in both km/h and mph. Safety Risk: This small error does not affect vehicle safety. Corrective Actions: This is not a recall. Tesla has made changes to ensure that all new vehicle speedometers display mph and km/h when the display distance is set to miles. In addition, this change was sent to all vehicles in firmware update 2020.36.11.

Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a Tesla service center to have the passenger-front airbag inflator replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

On certain vehicles, the bolts that attach the power steering gear assist motor to the gear housing may corrode and fracture. This could allow the power steering gear assist motor to move, causing the belt to slip which could result in a loss of power steering assist. A loss of power steering assist would require additional steering effort which could increase the risk of a crash causing injury and/or damage to property. Correction: Tesla service centers will replace the aluminum mounting bolts with coated steel bolts and will apply a corrosion-preventative sealer around the gear housing and connecting bolts. If bolts are found to be broken or break during the removal process, Tesla will also install a new steering gear.

*** This notice is provided for information purposes only as the subject equipment is not regulated under the Motor Vehicle Safety Act *** The NEMA 14-30, NEMA 10-30 and NEMA 6-50 electrical adapter that could have been separately purchased as an accessory for the universal mobile charging connector on certain Tesla Motors vehicles may be impacted by higher than normal electrical resistance due to a potential manufacturing defect. This could cause the adapter to overheat, potentially increasing the risk of a fire causing injury and/or damage to property. Correction: impacted owners will be supplied with a redesigned NEMA adapter. Updated adapters will be sent by Canada Post or commercial carrier once available.

On certain vehicles, the driver and front passenger seatbelt anchor plate may not have been properly bolted to the pretensioner anchor plate during assembly. In the event of a crash, the seatbelt may be unable to provide sufficient restraint force, which could increase the risk of injury to the seat occupant. Correction: Tesla Service Technicians at authorized locations will inspect and affect repairs as necessary.

*** This notice is provided for information purposes only as the subject equipment is not regulated under the Motor Vehicle Safety Act *** The NEMA 14-50 electrical adapter, supplied with the universal mobile charging connector on certain Tesla Motors vehicles, may be impacted by higher than normal electrical resistance due to variations in external sources of electricity. This could cause the plug and/or wall receptacle to deform, melt, or overheat, potentially resulting in an electrical short and increasing the risk of a fire. Correction: Vehicle software has been updated over the air already to reduce charging current if a high-resistance condition is detected. As an extra measure of assurance, owners will be supplied with a redesigned NEMA 14-50 adapter containing an internal thermal fuse. Updated adapters will be sent by Canada Post or commercial carrier once available.

There may be a malfunction in the older Multi Media Unit (MMU) due to wear of the 8GB Multi Media Card (eMMC). Functions such as the rearview camera, exterior turn signal lights, and controls for defrosting and defogging the windshield may potentially stop working if a malfunction occurs in the Multi Media Unit.

Tesla will inspect the vehicles to determine if they contain an 8GB Multi Media Card (eMMC) and, if present, will replace the 8GB eMMC with an upgraded 64GB eMMC free of charge.

When the passenger airbag is activated, excessive pressure can occur in the ignition mechanism. This can cause the casing of the ignition mechanism to crack and metal fragments to detach. Detaching fragments can hit and injure the occupants.

The manufacturer is taking measures. The vehicle owner is requested to make an appointment with a brand dealer. The airbag will then be replaced.

The material of the bolts of the drive cylinder of the power steering may corrode. As a result, the connection and the cylinder may detach. This could lead to a failure of the power steering.

The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is requested to make an appointment with a brand dealer. The attachment of the drive cylinder will then be checked and the bolts will be replaced with a corrosion-resistant version. If necessary, the drive cylinder will also be replaced.

The seat belt anchorages of the front safety belts may be incorrectly mounted. The belt anchorage may come loose under slight force. The safety belt will then not provide the required protection.

The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is requested to make an appointment with a brand dealer. The mounting of the front belt anchorages will then be checked and repaired if necessary.