1. Início
  2. Peugeot
  3. 208
  4. 2013

Peugeot 208 2013

4 campanhas de recall estão registradas.

Nenhum à venda em Estados Unidos ainda
Vendendo um? Poste gratuitamente, ele aparece nesta página. Venda o seu
Peugeot 208
Foto representativa do 208. Pode mostrar um ano ou versão diferente. Foto: Alexander-93 · CC BY-SA 4.0 · Wikimedia Commons · redimensionado e cortado

À venda em Estados Unidos

Nenhum 2013 Peugeot 208 à venda em Estados Unidos ainda Você possui um? Poste gratuitamente e alcance compradores que já estão procurando por este carro exato.
Venda seu 208

Chamadas de retorno

4 campanhas🇳🇱 NL dataRDW

Traduzido automaticamente do texto em holandês do RDW. O original está na fonte.

Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.

Wheels, Tires MGP140132 · 2014-03-05 · RDW
Consequência · Solução

The fastening bolts that mount the front control arms to the subframe are manufactured with insufficient strength. As a result, the fastening bolts may break. If the fastening bolts break, the control arms may become completely or partially detached from the vehicle. As a result, the vehicle may become uncontrollable and/or the driver may lose control of the vehicle.

The manufacturer is recalling the affected vehicles. Measures will be taken to fix the defect. The vehicle owner is requested to contact the brand dealer as soon as possible. They will replace the fastening bolts with an updated type.

Visibility MGP130216 · 2014-01-06 · RDW
Consequência · Solução

The ground of the windshield wiper motor via the regular wiring is insufficient. As a result, the windshield wiper motor may fail. Wipers may not operate.

The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is requested to make an appointment with a brand dealer. They will check the windshield wiper motor and, if necessary, add an extra ground wire to the windshield wiper motor.

Structure MGP130157 · 2013-10-07 · RDW
Consequência · Solução

The spot welds of the subframe at the location of the engine have not been properly executed. This can cause the spot welds to come loose. The individual parts of the subframe may partially detach. This will reduce the strength of the subframe. Since part of the steering mechanism and the wheel suspension are attached to the subframe, there is a chance that play will develop in these components, adversely affecting the vehicle's steerability.

The manufacturer is recalling the relevant vehicles. Measures will be taken to fix the defect. The vehicle owner is requested to make an appointment with a brand dealer. The dealer will replace the subframe.

Wheels, Tires MGP130048 · 2013-04-18 · RDW
Consequência · Solução

It may occur that the recess for securing the fastening nuts of the rear wheel hubs is not deep enough. This can result in the nut not being sufficiently secured. In exceptional cases, the rear wheel with brake drum may come loose. This can cause the driver to lose control of the vehicle.

The manufacturer recalls the affected vehicles and takes measures to resolve the defect. The vehicle owner is requested to make an appointment with a brand dealer. They will inspect the securing of the fastening nut of the rear wheel hubs and repair it if necessary.

Na estrada

Carros deste modelo registrados pela primeira vez em 2013, a partir de registros oficiais. Cada figura pertence ao seu país.

🇳🇱 Registro de veículos, Holanda

8,750 ainda registrado

0% com um recall aberto

Preço médio de lista quando novo: 18,824 € (impostos holandeses incluídos) · RDW, CC0

Perguntas

O 2013 Peugeot 208 tem campanhas de recall?
4 campanhas de recall estão registradas. A mais recente envolve Wheels, tires (2014-03-05).

Outros anos

Outros modelos da Peugeot

Compartilhar

Você possui um 2013 208?

Publique-o gratuitamente e alcance compradores que já estão interessados neste carro exato.

  • Gratuito, sem comissão
  • Cerca de três minutos
  • Seu anúncio aparece nesta página
Anunciar grátis