Peugeot 2008 2016
1 campanhas de recall estão registradas.
À venda em Estados Unidos
Chamadas de retorno
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Consequência · Solução
The timing belt is deteriorating due to the degradation of engine oil caused by specific fuels and additives, which is recognized as a non-compliance condition. This deterioration can lead to the surface of the timing belt peeling off, damaging the brake vacuum pump and reducing the functionality of the brake booster.
All vehicles will implement the following measures: 1. Inspect the timing belt and replace it, along with the vacuum pump and oil filter, with new parts if deterioration is confirmed. 2. Update the engine ECU software to the countermeasure program and add a warning function related to the reduction of booster functionality.
Traduzido automaticamente do texto em holandês do RDW. O original está na fonte.
Pode não se aplicar aos veículos vendidos no seu país. Verifique com seu VIN na fonte.
Consequência · Solução
The fastening bolts of the rear axle may come loose due to an incorrect tightening torque. This could result in the loss of a rear wheel or deteriorating brake performance.
Vehicle owners are requested to make an appointment with a brand dealer. They will tighten the rear axle fastenings to the specified torque.
Consequência · Solução
The timing belt may possibly tear over time. In the worst case, this can lead to potential damage to the vacuum pump. A damaged vacuum pump may result in reduced or lost brake assistance.
Vehicle owners are requested to make an appointment with a brand dealer. The work consists of checking the timing belt, the oil pump, and updating the software.
Consequência · Solução
The control relay for the starter motor may be improperly manufactured. This may cause the starter motor to activate unintentionally. If the vehicle is in gear and not on the handbrake, it can move uncontrollably, and the starter motor may overheat.
The manufacturer recalls the affected vehicles. Measures will be taken to remedy the defect. The vehicle owner is requested to make an appointment with a brand dealer. The dealer will check the control relay of the starter motor and replace it if necessary.
Consequência · Solução
A piece of plastic got into the ABS/ESP unit during production. If the fault occurs, the ABS/ESP may not function during an emergency stop or evasive maneuver.
The manufacturer is recalling the affected vehicles. Measures will be taken to correct the defect. The vehicle owner is requested to make an appointment with a brand dealer. The dealer will check the ABS/ESP unit and replace it if necessary.
Consequência · Solução
The banjo bolt which attaches the oil line to the turbocharger may not seal properly. Oil leakage could occur near hot parts of the engine.
The manufacturer is recalling the affected vehicles. Measures will be taken to rectify the defect. The vehicle owner is requested to make an appointment with a brand dealer. The banjo bolt and the sealing rings will be replaced.
Perguntas
- O 2016 Peugeot 2008 tem campanhas de recall?
- 1 campanhas de recall estão registradas. A mais recente envolve Engine and engine cooling (2023-02-22).
Outros anos
Outros modelos da Peugeot
Você possui um 2016 2008?
Publique-o gratuitamente e alcance compradores que já estão interessados neste carro exato.
- Gratuito, sem comissão
- Cerca de três minutos
- Seu anúncio aparece nesta página