2022 Mazda CX-60
The 2022 Mazda CX-60 has a 2.5 L engine with 188 hp. ANCAP rates it 5 out of 5 stars. 11 recall campaigns are on record.
Specs
| Cylinders | 4 |
|---|---|
| Length | 4,740 mm (186.6 in) |
| Width | 1,890 mm |
| Wheelbase | 2,869 mm (113.0 in) |
| Curb weight | 1,974 kg (4,352 lb) |
| Seats | 5 |
| Fuel consumption (EU, WLTP) | 1.5 L/100 km |
| COâ‚‚ (EU, WLTP) | 33 g/km |
Power: lowest to highest version, from EEA (EU new registrations 2022). WLTP figures: average of the cars registered new in the EU that year (EEA).
Specs: average of the cars of this model first registered in 2022 in the Netherlands (RDW vehicle register).
For sale in United States
Safety
Crash-test results across markets. They can vary by version and equipment.
Test details
Test details
Test details
Test details
Recalls
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Consequence · Remedy
The transmission control computer for mild hybrid vehicles may have improper clutch control, which could cause the engine to fail to restart when transitioning from EV driving, potentially leading to engine stalling.
All vehicles will have the control programs for the transmission control computer and engine control computer modified to the remedial program, and initial learning for the transmission will be conducted.
Consequence · Remedy
The transmission control computer is recognized as having a structure, device, or performance that is not compliant with standards, where the clutch control during deceleration is inadequate, which may result in the clutch connecting the engine and motor remaining released when the brakes are applied strongly to stop. This may cause the vehicle to be unable to start even when the accelerator is pressed.
The control program of the transmission control computer will be corrected, and initial learning of the transmission will be conducted.
Consequence · Remedy
The transmission control computer has inappropriate clutch control during deceleration, which may cause delays in clutch release timing or unintended clutch engagement. This can lead to a decrease in engine RPM during deceleration and potentially stall the engine at low speeds.
All vehicles will have the control program of the transmission control computer corrected to a remedial program and initial learning of the transmission will be conducted.
Consequence · Remedy
The vehicle control computer's smart brake support control program is inappropriate, which may cause the proximity detection function to malfunction when there are diagonal metal walls on the roadside, resulting in unnecessary warnings and potentially triggering emergency braking.
All vehicles will have the control program of the vehicle control computer modified to the remedial program.
Consequence · Remedy
The electric power steering gearbox has an inappropriate structure and performance due to improper load conditions between the gears, causing grease applied to the meshing part to be extruded, which may increase the sliding resistance. As a result, the steering operation force may increase when operating the steering.
All vehicles will have the spring for gear meshing replaced with a remedial part. Additionally, the extruded grease will be reapplied to the meshing part of the worm wheel.
Consequence · Remedy
The engine control computer has inappropriate startup conditions for the hybrid system, which may prevent the mild hybrid battery relay circuit from connecting, leading to a 'hybrid system malfunction' message and the engine warning light being illuminated, potentially causing the vehicle to be unable to move.
All vehicles will have the engine control computer's control program modified to the remedial program.
Consequence · Remedy
The side radar sensor has an issue where the recorded information for correcting the angle of the emitted radar waves is lost during system shutdown due to improper information processing program. As a result, the sensor may not correctly recognize the position of objects, potentially leading to the failure of warning sounds or damage mitigation brakes during forward or reverse maneuvers. Additionally, there is a risk of warning sounds being triggered even when there is no possibility of a collision, which could result in emergency braking.
All vehicles will have the control program of the side radar sensor modified to the remedial program. If the recorded information of the side radar sensor has been lost, the sensor will be replaced with a remedial product.
Consequence · Remedy
In the front suspension, due to improper assembly work during vehicle assembly, there are bolts and nuts that are not tightened to the specified torque connecting the upper arm, ball joint, and steering knuckle. Continuing to use the vehicle as is may result in the bolts coming loose, and in the worst case, the steering knuckle may detach from the ball joint, causing a tire to contact and potentially leading to a flat tire and inability to drive.
Inspect the condition of the bolts and nuts on all vehicles and tighten them to the specified torque. If any bolts or nuts are missing, replace them with new ones.
Consequence · Remedy
In the transmission control computer, due to an inappropriate control program, the clutch may not release when the brake is pressed firmly during shifting or when restarting the engine from EV driving. This may cause engine RPM to drop and, in the worst case, lead to stalling.
All vehicles will have the control program of the transmission control computer modified to the remedial program.
Consequence · Remedy
Due to improper assembly during manufacturing, the oil pump chain may not be installed in the correct position. This may cause the oil pump to detach, leading to a drop in oil pressure, triggering the oil pressure warning light and engine warning light, and in the worst case, the engine may seize.
The remedy involves inspecting and correcting the oil pump chain assembly.
Consequence · Remedy
The front stabilizer may twist due to improper torque settings on the nut that secures the control link, potentially leading to looseness and abnormal noise, which may not meet safety standards.
All vehicles will have the nut securing the control link tightened to the specified torque.
Translated automatically from the RDW's Dutch text. The original is at the source.
It may not apply to vehicles sold in your country. Check with your VIN at the source.
Consequence · Remedy
The high-voltage system can detect a fault in the insulation resistance. When the vehicle is stopped in this situation, the safety mode will be activated. As a result, the vehicle can no longer be started and cannot be moved independently. This can potentially lead to dangerous traffic situations.
The vehicle owner is requested to make an appointment with the brand dealer, who will reprogram the drive module with improved software.
Consequence · Remedy
The HV battery cooling system, windshield defrosting, seatbelt warning, and 360° surround camera may not function properly due to incorrect software. If these issues occur while driving, it can lead to dangerous traffic situations resulting in an accident.
The vehicle owner is requested to contact the brand dealer for a software update.
Consequence · Remedy
The worm gear in the steering mechanism may have too much friction force, causing the vehicle to steer suddenly heavily. Sudden and unexpected changes in steering force while driving can increase the risk of a traffic accident.
Vehicle owners will receive a letter requesting them to promptly schedule an appointment with a Mazda dealer or Mazda authorized repairer to have the vehicle repaired for free.
Consequence · Remedy
The software of the drive module does not function properly during a fault in the drive system. The cameras' software may also not work correctly. This could lead to failure of the vehicle's drive and failure of the cameras.
The vehicle owner is requested to make an appointment with a brand dealer. The relevant software will be updated.
Consequence · Remedy
The instrument panel may possibly fail due to incorrect software. The failure to display speed, fuel gauge, vehicle safety systems status, and warning messages while driving can create dangerous situations for the driver, passengers, and other road users.
Vehicle owners will receive a letter requesting them to promptly schedule an appointment with a Mazda dealer or Mazda authorized repairer to have this action performed for free.
Consequence · Remedy
Due to possibly missing wheel nut fastenings (washers), the wheel nuts may not be sufficiently tightened and may come loose. The wheels can detach from the vehicle, posing a safety risk to the driver, passengers, and other road users.
Vehicle owners will receive a letter requesting them to promptly schedule an appointment with a Mazda dealer or Mazda authorized repairer to have this action performed for free.
On the road
Cars of this model first registered in 2022, from official registers. Each figure belongs to its country.
🇳🇱 Vehicle register, Netherlands
762 still registered
3% with an open recall
Average list price when new: 62,594 € (Dutch taxes included) · RDW, CC0
Questions
- What engine does the 2022 Mazda CX-60 have?
- The 2022 Mazda CX-60 has a 2.5 L engine with 188 hp.
- Is the 2022 Mazda CX-60 safe?
- ANCAP rates it 5 out of 5 stars.
- Does the 2022 Mazda CX-60 have recalls?
- 11 recall campaigns are on record. The latest concerns Power train (2024-10-31).
Other years
Other models by Mazda
Do you own a 2022 CX-60?
Post it for free and reach buyers who are already looking at this exact car.
- Free, with no commission
- About three minutes
- Your listing shows up on this page