Jeep Wrangler Unlimited 2016 — Problemas reportados

ABS and break lights on in car. Took to local repair shop and informed that the ABS control module has become defective. Attempted to purchase the required OEM part for repair in July of 2025. Was informed the part is on back order with no intended arrival date. Have continually reached out to local dealership since that time and part continues to remain on back order with no arrival date. Have been informed by the dealership that my automatic breaking system will no longer function, making the car unsafe to drive on a daily basis. This could lead to a catastrophic accident due to no breaking system. Manufacturer has not prioritized increasing supply of the replacement part and has not issued a mandatory recall for this safety issue.

The contact owns a 2016 Jeep Wrangler. The contact stated that while driving 5 MPH, the ABS and check engine warning lights illuminated. The vehicle was taken to the dealer where it was diagnosed with ABS module failure. The dealer was contacted and made aware of the failure. The contact was informed that the ABS module needed to be replaced. The contact was informed that parts were on back order. The manufacturer was contacted and made aware of the failure. The failure mileage was approximately 70,000.

The contact owns a 2016 Jeep Wrangler. The contact stated that the factory oil filler adapter housing was made of plastic, which heated up, warped, and cracked over time. This structural failure caused engine oil to drip and spray across the entire underside of the vehicle, heavily coating the frame and the hot exhaust system. Due to the oil contacting the hot exhaust, a strong burning oil odor entered the vehicle cabin. The contact explicitly stated that their life was in danger due to the continuous failure. The contact stated that the manufacturer was fully aware of the common safety defect. The vehicle was taken to an authorized dealer, where a diagnostic inspection confirmed a complete failure of the oil filter adapter housing. The failure mileage was 111,000.

Vehicle reflects a code of C2200. It is due to a faulty ABS module that controls the antilock brake system, traction w and cruise control. The remedy is to replace the part (part number 68259556AD). This part has been on national back order for several years now with no anticipated date of release. The manufacturer has Indicated it will not be made. This is a safety item that not only affects the performance of the vehicle but limits it resale value. Numerous vehicles from 2011-2017 models have been affected.

When I was coming to a stop at a stoplight, my vehicle started to violently wobble almost having me to loose control. I was unable to slow down when pressing the brakes and almost hit vehicles in front of me.this has happened numerous times and I have had my tires rotated and alignment done just recently.

ABS Control Module stopped working with several warning lights showing on dash display. After 12 months the dealer is unable to supply a replacment part or a possible date when a new part might be available.

The ABS module on my jeep has failed. I've been put on a list to get a replacement part but have been on the list for 10 months with no indication of when my parts order will be fulfilled. The failed ABS module caused the BRAKE, ABS and TCS warning lights to be on. I am driving a vehicle under unsafe conditions and the manufacturer does not care.

My 2016 Jeep Wrangler is experiencing an ongoing problem with the ABS/braking system and wheel-speed sensor. The ABS/brake warning light comes on intermittently, particularly when turning right and during hot weather. The vehicle has NOT been repaired for this problem. I am reporting it because I am concerned that there may be a defect involving the wheel-speed sensor, sensor wiring/connection, wheel hub, or ABS system. Because these components are connected to the vehicle’s anti-lock braking and stability/traction-control systems, I am concerned about the safety of continuing to drive the vehicle. I would like this problem investigated as a potential safety defect. I am also requesting that NHTSA review whether other 2016 Jeep Wrangler owners have reported similar ABS, brake warning light, or wheel-speed sensor failures and determine whether a safety recall is warranted. There was no accident it just started happening on its own.

ABS Brake Sensor is on and the ABS Module needs to be replaced, however there are a lot of other people out there with this same issue and nobody can keep up with the parts to fix the problem. This should be a recall for all Jeeps 2009-10018

The contact owns a 2016 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle experienced an ABS module failure. The ABS and traction control warning lights were illuminated. The dealer was contacted and diagnosed the vehicle with ABS control module failure; however, the part to repair the vehicle was not available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time to provide the parts for the repair. The manufacturer was made aware of the failure but was unable to determine when parts for the repair would be available. The failure mileage was approximately 80,000.

The ABS control module has internal problem which shuts down the module. Results of the module shut down includes: -The stability and traction systems are offline. -A failure in the ABS module or hydraulic unit. -Cruise Control inoperable. -The module no longer modulates brake pressure, which can result in brakes locking. Currently, Mopar has stopped production of this item, so there is no method to replace a failed or non-working module with an original part.

Code C2200 Multiple visits to shop. Part is on indefinite backorder. Brakes lock up when quick needed, traffic/other driver pull out in front of me Showed up 4 months ago

I was driving down the road in a snow storm when all of a sudden the vehicle started swirling all over the road. I pulled over and looked underneath and something was hanging down. I had no choice but to drive it slow less than 10mph to make it home as it was also making a hard jumping. Once there I had my mechanic come look at it and the drive shaft was busted. I am extremely luck that this happened during a snow storm because if not I may have rolled the vehicle as the steering was greatly affected.

ABS module is bad, shooting codes on dash, disable cruise, worried about issues with braking.

The ABS Module is non operative and has been on back order for over 3 years from the Dealership.

My 2016 Jeep Wrangler will buck and jerk when on the highway. I’ll be going a steady speed, not changing speed. I feel the car slow down and stomp on the gas but it goes all the way to the floor and nothing happens. When I try to go into the break down lane, the steering wheel locks up and won’t turn. Usually I take the key out then put it back in the ignition and it starts no problem. Recently, the engine has been stalling when I put the key back in the ignition. I usually have to take the key out and sit on the side of the highway for 5 minutes before starting it up with no problem. This has happened too many times than I’d like to admit. Take it to the shop, no codes come up. Sometimes the engine light will turn on when this happens, other times it doesn’t.

ABS module failure

The abs module malfunctioned and there’s no replacement. It’s been on back order for a couple years

ABS module failure without cause. New modules no longer being produced. Lack of anti braking system is a huge safety concern. Vehicle was looked at by a mechanic. Brake light, stability control light, and ABS light all came on at the same time at the time of failure. Vehicle was in park and turned on at the time of failure.

The contact owns a 2016 Jeep Wrangler. The contact stated while the vehicle was parked, the antilock brake system warning light was illuminated. The vehicle was taken to an independent mechanic where it was diagnosed that the antilock brake system needed to replaced however, the dealer recommended that the vehicle be taken to a dealer. The vehicle was not repaired. The vehicle was taken to a dealer where it was diagnosed once again that the antilock brake system needed to be replaced however, the parts were not available. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 76,000.

The contact owns a 2016 Jeep Wrangler. The contact stated while driving at an undisclosed speed, the ABS and traction control warning lights illuminated. The vehicle was taken to an independent mechanic where it was diagnosed with a failed ABS module. The contact was informed that the ABS module needed to be replaced. The vehicle was not repaired. In addition, the contact was informed that the parts were in back order indefinitely. The contact was advised that she could drive the vehicle at her own risk. The manufacturer was not made aware of the failure. The failure mileage was approximately 67,108.

I bought Jeep from dealership gas keeps overflowing out of tank during fill ups. Check engine light now on

The ABS module (68259556AD) on my 2016 JKU is not working (code C2200) and the part is not available anywhere. I tried buying online and reaching out to a dealership, but everyone acknowledges Stellantis doesn’t have the part available. There are posts on Jeep forums from 2023 from people with the same issue which is causing their Jeeps to go into limp mode at highway speeds. I feel unsafe driving my car and there’s no current way to fix this issue.

The ABS module has gone out with replacement parts on backorder and not being manufactured for a lengthy time. This is caused my jeep to go into limp mode since August 2025. There has not been a resolution to solve this problem at this time. Even to have it refurbished or rebuilt has not been an option due to most companies no longer working on this part.

I have a 2016 jeep wrangler and I was trying to get it fixed but the dealership said it was the abs module and that they could not get one in because they are on back order because they warehouse that provides the chips for them burned down. I was then told that it is not promised to when they will be available and then they tried to turn around and ask me did I want to trade it in. So now I am stuck still paying for the jeep and I can not drive it because of the abs module. I understand life happens but the manufacture should have called a recall or something because people are not going to be able to drive their vehicles but still have to pay for them and I am sure no one wants to start over on a new vehicle when they have paid so much on their current one.

ABS (Anti-lock Braking System) Control Module failed nine months ago. Without working ABS Control Module the braking system and traction control system do not function which is a huge safety concern. New ABS Control Modules have been out of stock at all Jeep Dealers across the country! Thousands of Jeep Wrangjer owners are waiting for new ABS Control Modules and until Chrysler corporation provides new Modules all owners are enduring big safety risks driving their Jeeps! Need immediate help from the NHTSA forcing Chrysler to immediately provide new ABS Control Modules. A safety recall needs to be issued immediately for failed ABS Control modules for many thousands of Jeep Wranglers Thank you for whatever help the NHTSA can provide to resolve this big safety issue.

Keep ABS / Traction control module defective with no replacement available.

The ABS module has failed and this is such a widespread issue with Jeep Wranglers that you can't even find a new ABS module part to order. The failure of this part impacts the braking system. Jeep should make a recall and fix this issue.

ABS Module has been on backorder since 2021. Cannot get an ETA on part from the dealership. They advised its been on backorder 3 yrs at the time issue was confirmed. 9 months to date on backorder list. No traction control, ABS, cruise control and emergency brake. The vehicle has lost speed making it not maintain a speed on hills, and highway. Vehicle feels unstable.

ABS Module has gone bad. Has an internal communication error. This is typical on these vehicles. The problem is getting a part from Chrysler. The modules have been on back order for years and there’s no sign of getting a fix. The vehicle is unsafe to drive but we are left with no choice but to continue to drive it. Why hasn’t anything been done to kick them in gear and get replacement parts made?

I own a 2016 Jeep Wrangler with a malfunctioning Anti-lock Braking System (ABS). The ABS is not functioning, creating a serious safety risk, particularly during emergency braking and adverse road conditions. The vehicle has been under an active repair order with Town & Country Jeep Chrysler Dodge Ram since October, but the required part remains on indefinite backorder with no estimated time of arrival. I have escalated this issue to Stellantis Customer Care and have ongoing email correspondence documenting the delay and lack of resolution. Despite these efforts, the vehicle remains unrepaired, forcing me to either drive with a known safety defect or go without transportation. This situation represents a failure to repair a critical safety system within a reasonable timeframe. I am submitting this complaint due to the ongoing safety risk and lack of timely resolution.

Just like many other people have wrote about, the ABS SENSOR is defective. The ABS light comes and the traction light does also. Jeep has been aware of the problem for 18 months to 2 years. There is no fix or replacement sensor in sight.

MY GIRLFRIEND ALMOST CRASHED GOING DOWN A HILL TOWARD A STOP SIGN FOR A BUSY INTERSECTION FOR A ROAD THAT IS ALONG A CLIFFSIDE. JEEP CANNOT GET A PART FOR THIS VEHICLE AFTER NUMEROUS ATTEMPTS TO GET ONE. NEEDS AN ABS MODULE AS ONE OF THE WHEEL SPEED SENSOR CIRCUITS IS NOT COMMUNICATING. I HAVE REACHED OUT TO MULTIPLE MODULE REBUILDERS AND THEY ARE UNABLE TO GET PARTS FOR THIS MODULE ANYMORE. THIS IS A WELL-KNOWN ISSUE WITH THE WRANGLERS AND JEEP IS NOT WILLING TO RELEASE A RECALL TO MAKE IT RIGHT. DUE TO PARTS SHORTAGE, THE MODULES ARE GOING ONLINE FOR 1500-2000, WHICH FOR A MAJOR SAFETY COMPONENT CAN BE A LARGE ISSUE. WE HAVE SINCE PARKED THE VEHICLE FOR THE PAST 3 MONTHS WHILE I ATTEMPT TO LOCATE A REASONABLY PRICED MODULE OR FIND SOMEBODY THAT HAS THE CHIPS/CAPACITORS TO REBUILD IT. I AM A DEALERSHIP TECHNICIAN WITH 7 YEARS OF EXPERIENCE AND WE HAVE SENT LOTS OF THESE VEHICLES TO AUCTION FOR THE SAME CONCERN.

ABS module reported to dealer in February, 2025..They said was safe to drive. Then April 2025 the module went out.-Part has been on backorder since March 2025. It was taken to Key Chrysler Dodge Jeep in Marianna in March 2025. Jeep would not steer properly, the brakes were not normal and all the warning lights on dash were on. I could not drive. .

Pulled into parking space. Applied brakes and came to a complete stop. Could hear engine revving up.. Thought ok, that gas pedal seem to be pressed. Look at my foot wasn’t pressing the pedal. Looked at floor mats. It was laying flat on floor, not manipulating the pedal. I thought what’s happening? And lifted foot off brake ever so slightly and car jumped 6 inch high curb and hit the building.. Pretty hard. Caused structural damage to the wall. I went to the hospital, driven by husband. Swelling of my right leg on the shin. Released and told to stay off leg for few days, no fractures.After doing research, It seems other jeep riders have had this experience. I have no idea how fast the jeep was going.

Anti-Lock Brake System stopped working rendering the car inoperable. The first incident: about 5 years ago the ABS engaged the brakes while driving almost causing a collision. This incident occurred in Guaynabo, PR. After this incident the ABS Module stopped working but the car was still operable. A week ago the PCM lost communication with the ABS module bringing the car into "limp mode" (stuck in 3rd gear until y did not longer engaged the transmission. Also the speedometer stopped working.) This happened while driving on a Sunday on busy road. This has been a common issue with Jeep Wranglers made from 2012 to 2018. The company at this moment is not producing replacement parts (ABS Modules) for these vehicles leaving owners without any way to fix or use their cars. ABS Module DTC's: -C2200 -U0100 -U0141 -U0126 -U0002 While scanning the module comes and goes offline.

My ABS module has been in error for 8 months. Stellantis still cannot fill the order after 8 months and only keeps delaying on weeks at a time .

While driving my vehicle on Monday, February 16, 2026 I heard a loud pop come from the front of the vehicle. Right after that smoke began to come through the hood vents. I stopped the vehicle to inspect and at that point the engine compartment was burning heavily. I could barely get out of the vehicle and away before the whole front end of the vehicle was engulfed with fire and heavy black smoke. It looked as if the fire started somewhere on the righthand side of the engine compartment because the right front tire was the first to blow out in the fire. The vehicle is with the insurance company to inspect, but it was in perfect running condition, all maintenance performed. There were no dash warning lights that came on, no odd sounds heard and the vehicle ran until I stopped and shut it office. There has to be something that was wrong with the manufacturing of this specific engine to make a loud pop and burn as hot as it did. I wanted to report this before the vehicle is sent away to be demolished due to it being a complete loss.

I HAVE A FAULTY ABS MODULE, THROWING CODE C2200. THE PART HAS BEEN ON ORDER FOR OVER 2 MONTHS WITH NO END IN SITE. WE ARE BEING TOLD TOLD THAT THIS IS NOT A SAFETY ISSUE. HOW CAN WE GET THIS RESOLVED???

Head gasket failure, causing motor to overheat.

Unsafe Vehicle, Unresolved Mechanical Failures – Serious Safety Concern On [XXX], I purchased a Jeep (VIN: [XXX] ) from Whipple Auto Sales. Since the purchase, the vehicle has experienced repeated mechanical failures that have created serious safety concerns. Approximately two weeks after purchase, the dealership replaced a fuel injector due to performance issues. About one month later, the vehicle began showing sensor codes and experienced sudden power loss while driving. On [XXX] the vehicle completely shut off while I was traveling on the highway, placing my safety at significant risk. The dealership initially stated that the key required reprogramming. However, after keeping the vehicle for approximately one month, they were still unable to repair the issue. The dealership later claimed the problem was related to the powertrain. Without resolving the issue or providing proper notice, they returned the vehicle to my residence in worse condition than when it was left with them. At this time, the vehicle is unsafe and unreliable, and I cannot confidently operate it. This situation demonstrates a lack of proper repair, accountability, and resolution. I am extremely concerned about the safety and reliability of this vehicle and the dealership’s handling of this matter. I am seeking a proper resolution to this issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

ABS Module Part# 68259556AC has failed. (Replacement part is 68259556AD) Stellantis/Jeep has not provided a replacement part for over three years. This affects all Jeep Wranglers 2014-2018. We have no ABS and no traction control in our Jeeps. We need help.

The ABS control module has failed. Anti-lock brake and stability management systems, in addition to vehicle descent control are malfunctioning. This renders the vehicle extremely unstable and difficult to drive. Stellantis is aware of the problem and reports no replacement parts are available and has not issued a recall. The vehicle has low milage and has never been in an accident.