GMC Yukon 2016 — Problemas reportados

Abs system is not functioning properly, codes are being thrown for multiple things such as cylinder 2, which all spark plugs and coils and spark lines were fixed, then it ran for one day and threw a different code of cylinder 6 misfire with the abs and stailitrx system not functioning correctly. Several parts have been changed on this by professionals and they can’t figure out why this is happening. I don’t have my full hp.

Issues with the 8L90 transmission. The shuddering and hesitation has gotten very bad and having to look into options to repair or replace the transmission

The car lost all engine power on the interstate of I10. Leaving me without power, barely able to get to the side of the road. Warning only when lost engine power on the highway. Cannot be driven.

The contact owns a 2016 GMC Yukon. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The contact stated that there was an abnormal sound coming from the vehicle and the ABS warning light was illuminated. The contact stated that after several attempts, the vehicle stopped. The vehicle was taken to the dealer; however, the vehicle was waiting to be inspected. The contact stated that an unknown recall repair with a similar description was completed in 2024; however, the contact was informed that the repair was not covered under warranty. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 136,000.

Power steering intermittently and unexpectedly stops working.

The contact owns a 2016 GMC Yukon. The contact stated that while the vehicle was at the inspection station for an inspection, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact stated that the transmission had seized, and the vehicle failed to move. In addition, the check engine warning light was illuminated. The contact stated that the failure had occurred immediately after an unknown device was attached to the vehicle while being inspected. The contact informed the inspector of the failure. The contact was advised to contact the NHTSA Hotline to report the failure. The dealer was not made aware of the failure. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was not made aware of the failure. The failure mileage was 119,637.

The contact owns a 2016 GMC Yukon. The contact stated that while driving at an undisclosed speed, the brake pedal became inoperable and failed to engage properly, with no warning lights illuminated. The contact also stated that while the vehicle was parked, excessive force was needed to engage the brake pedal and stop the vehicle. The contact stated that the failure nearly caused the vehicle to collide with another object. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 108,959.

Transmission went out very early. Had to get it replaced whenever I reverse. I have to really smash on the break in order for it to stop if it does stop so somethings wrong with the breaking whenever I hit a bump the left side suspension feels like I’m a lose control and sometimes my radio works and sometimes it doesn’t I’ve been trying to work with dealers I have extended warranty on it. They’re saying it’s not covered something about the brake pump is covered, but the belts are not. The transmission was put in only because it left me stranded. Otherwise I would’ve been stuck paying for that. The dealership actually helped me with that. My GPS turns on and off sometime. I’m not sure if it’s electrical

Ticking sound coming from engine, possible damaged camshaft lobe due to lifter roller failure. It can cause sudden engine failure, significant power loss, and unexpected stalling while driving, increasing crash risks. The issue is linked to AFM (Active Fuel Management) system failures. The problem has been diagnosed by dealer service department. No warning lamp or message, problem first appeared 7 April 2026.

Vehicle been in the shop 3 times. [XXX] suspension light repeat come on. Working with warranty company. Light came on again 3 more times after Vehicle left the shop INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The suspension service lights repeatedly coming on.

The contact owns a 2016 GMC Yukon. The contact stated that the vehicle was initially repaired under warranty for a bent push rod in cylinder #4; however, the failure recurred. The vehicle was repaired another time at the expense of the contact's son, who previously owned the vehicle; however, the failure persisted. The contact stated that while idling and while driving, the engine was misfiring and running rough. Additionally, there was a significant amount of smoke coming from the exhaust pipe. The check engine warning light was illuminated. The vehicle was taken back to the dealer, where it was diagnosed, and the dealer determined that the engine needed to be replaced. The vehicle was not repaired due to the cost. The manufacturer was contacted and informed that the repair would not be covered because the vehicle was out of warranty. The failure mileage was approximately 27,000.

Misfire then replaced plugs,coils and wires, then change fuel injector, and problem still there, then started truck and was tossing power and motor started ticking. Every shop told me this is the same common problem they're having with all 6.2L engine and they're all on recall by GM. I know 2016 are not in recall but I think they should be because this problem is in all 6.2L engine

When making a slow turn in drive or reverse the park assist screen shows it’s not working. Then all screens in the car turn black and the steering locks while driving. Making it impossible to turn or move. This is happening while driving, while parking. Putting my safety and others at risk due to not being able to control the steering. Park assist failure screen pops up then all screens turn black. Car is still on just unable to move. I have not had it checked by a mechanic yet.

On [XXX], while idling in my driveway the engine abruptly stopped with a loud clunk and refused to turn over when I attempted to restart it. The vehicle was towed to Bergstrom GMC in Appleton WI. Upon inspection it was determined that a connecting rod and crankshaft bearing had failed requiring replacement of the engine. The vehicle has a 6.2-litre V-8 engine with 106,000 miles on it. The vehicle is currently still at the dealership waiting for the engine replacement at an estimated cost of $18,000. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

THE fuel pressure line from the fuel pump to the flex fuel sensor chaffed a pin hole leak near the front top of the fuel tank. This caused a significant fuel smell and trace leak at the front of the fuel tank which could lead to a fire or explosion. The new hose has a longer chaffing covering leading me to believe gm knew about this issue. vehicle has 127,000 miles. I feel gm should reimburse me for this repair as a fuel line should not have ever chaffed through and leaked.

The LED left turn signal and blind spot detection ( safety feature) on the left outside rear view mirror suddenly stopped working. The is a TSB for warranty for 2016-2018 GM YUKON (#10-08-64-002D) and it states that the bulletin has been revised to include 2016-2018 year models for this defect. I am starting this claim because I am told by GM that my VIN is not covered under this warranty, yet I am experiencing the same issue stated in the TSB listed above.

A side detection module pin was corroded and was disrupting the electrical signals to major vehicle components, such as the dash (DIC). The DIC would lose communication with the rest of the vehicle while driving so no vehicle operation data was visible such as speed, alerts messages, etc. This likely also caused engine failure due to the incorrect operation of the afm which is on the same electrical circuit. No warning messages were given. The bad side detection module was diagnosed and fixed at a dealer and shortly after engine issues were noticed.

Check engine light came on. Immediately went to reputable local repair shop. Shop advised push rod bent due to faulty engine. Advised to call GMC because not normal wear and tear. Called GMC expressed my frustration about this being preexisting issue w this engine. GMC corp told me I had to ship to GMC dealership at my own expense then they could help me. Local GMCs backed up 6-8 wks. Towed car 1.5 hrs away. Mechanic told me not to worry this happens all of the time, GMC will take care of it. Pointed out a row of new trucks with my incl new Escalade with same issue. I spoke to a sales rep about trading my car in for new but he said engine issue still not resolved. He advised me to lease Escalade for $900 because by the time my engine blew my lease would be up; if not GMC fix under warranty!! Mechanic said new engine but GMC will take care of it. I waited 3+ months for GMC to authorize repair. GMC said they did not get docs but mechanic sent me verification of conversation and repair order sent to GMC. Mechanic received an unrelated warranty from GMC that said my issue was not covered. Mechanic said docs sent made no sense bc he sent the right warranty and he was sorry and embarrassed by GMC behavior. I finally paid over 14K for new engine. Picked up my car and drive a block and car still knocking and engine light came back on. I had returned my rental and no way home. In tears dealership gave me my rental keys back still all at my expense. The mechanic calls me two days later to tell me my torque needs to be replaced. I am hysterical, 14k spent, and car still not fixed. GMC told me to pay additional funds for torque converter or pick up. Threatened to charge storage fees. When I discussed their liability GMC became very rude and antagonistic. They cut off my communication with their lead mechanic. Took care of back to local repair shop. He said this smells of a law suit so would not touch vehicle. I all communication 106 more files to share.

The contact owns a 2016 GMC Yukon. The contact stated while driving 70 MPH, and attempting to accelerate, the vehicle jerked, then briefly lost motive power before the engine seized. The contact was able to coast to the side of the road. The transmission warning light was illuminated. The vehicle failed to restart. The vehicle was towed to a friend's residence. The vehicle was not diagnosed or repaired for the most recent failure. Days before the failure, the vehicle jerked while driving at various speeds. The vehicle was taken to Auto Zone; however, no cause for the failure was found. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 143,000.

Engine light keeps appearing and when checked it shows catalytic converter needs replaces and its sensors need replaced. Brake light has short in it and I repaireable

TRANSMISSION SHUDDERS, LURCHES FORWARD UNCONTROLABLY, AND HARD SHIFTS

2 months ago our 16 gmc Yukon Denali 6.2 bent a push rod on cylinder 4 . So had to fix it when I took out DOD lifters put them on work bench and about 10 minutes out the DOD lifters flew apart and know having transmission issues it’s starting to shudder ! So I would liked the [XXX] thing recalled because engine still isn’t right either it only has 130000 miles. I’ll never buy a [XXX] gmc because of problems! I want the [XXX] thing fixed ASAP we paid to much money for it to be having problems!!!! Please send a recall letter to fix it ! [XXX] . 4/29/2025 6:53 p:m INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2016 GMC Yukon. The contact stated that while driving at an undisclosed speed, the vehicle unexpectedly downshifted with the check engine warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that the transmission had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 250,000.

Transmission failure, hard shifting, slipping and loss of power also severe shuddering. Very dangerous driving. I had to have the transmission replaced after taking the vehicle to a dealership and upon verification from same dealership reproducing the transmission failure. Massive financial loss, dealership stated these transmissions are known to fail. Manufacturer has been notified by numerous complaints. Compensation is warranted

The contact owns a 2016 GMC Yukon. The contact stated that while driving at 65 MPH and attempting to accelerate, the vehicle briefly shuddered before returning to normal functionality. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the torque converter. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.

On two occasions while driving at low speed, my vehicle braked on its on a pulled hard to the left; the stabilitrac indicator also popped on briefly. I went online to determine if there were any recalls on my vehicle and found that one of the recalls on the 2016 Yukon was the exact issue happening with my vehicle. I checked my VIN and found that my vehicle was not one of the vehicles with this issue. I called GM to see if my vehicle had just not been published yet. I explain the situation too the customer service person; she understood my situation and informed me that until my specific VIN in identified with this issue, there's nothing that can be done. I'm thinking that until an accident happen because of this issue, there is nothing that can be done. I read that my issue was a problem with the EBCM, which needs to be reprogrammed. I thank you for any assistance with this issue.

At 90k the engine stopped working, no warning or lights went off. 6.2L Lifters and bearings., The dealer gave us 14k for the car and we then went and bought and escalde with the 6.2L, that has also seized at 14k miles within 13 months of purchasing. The yukon has no reports of that on the car fax after our trade, which i found curious.

There's alot of time while I'm driving in line going slowly and break pedal become hard and it will seem like the truck it's not stopping.

Without warning, giving vehicle low consistent pressure on gas pedal to move forward slowly (2-3mph) vehicle rpm jumped up then suddenly shifted and vehicle jerked forward in a school zone. Behavior continued and vehicle was ultimately towed.

I WAS DRIVING MY CAR MONDAY AND I ALMOST CRASH WITH THE CAR IN FRONT OF ME THE BRAKES DOESNT WORK AND THEN IN THE PANEL START LIGHTS OF THE ENGINE THE SUPENSION LIGHT AND SIGH SAYING BRAKE ASISTANT, THE CAR IS PARK BECAUSE THE BRAKES AND I LOOK FOR RECALLS AND I CALL GMC AND THEY SAYS THAT I DONT HAVE ANY RECALL BUT I ALMOST DIE MONDAY BECAUSE THE VACUM PUMP FOR THE BRAKES FAIL AND ALL THE LIGHTS IN THE PANNEL START LIGHT UP.

My brakes are not working properly. I can be backing up and put my foot on the brake. My truck will keep moving until I apply a lot of pressure on the brake pedal. I can be backing up and my truck will automatically brake and stop moving. I have to cut the truck off, start it back up for it to move. I was in a stand still traffic jam and braking a lot and my truck did stop it keep rolling. Sometimes when I apply the brake it slides.. This is the third time I have put it in the shop. I changed the brakes, brake sensor and replaced tires. I am scared to drive it. My truck is currently in the shop now for the brakes. please help.

The engine failed and dropped down to limp mode while driving down the Hwy. Had to replace the engine for a toll of approx. $10,000. Truck only had 89,000 miles on it.

The car has all of a sudden had issues with the gas and breaking. When I press the gas, it stalls then rapidly accelerates. It has to be the transmission. Also, is making a noise and will barely drive when pressing on the gas. It does not accelerate!! Could have easily gotten into a car accident! What is going on??

When driving through Eugene brakes suddenly got soft while at a stoplight, then pedal got stiff and very hard to keep pressed. An alert came on the dashboard 'Brake Assist Service' just about the same time the brake pedal changed and car would not fully stay at a stop. When checking to feel what had just happened, by letting up and repressing the brakes, it would not fully stop car, even with all my strength pressing. If another car would have been coming through, my young son or myself could have been killed or seriously injured and I could cause someone seriously to be hurt or killed from being in their lane of travel. I alerted my husband that I was unable to drive the vehicle safely, he is in the vehicle industry and looked up online and found there is a common known problem, recalls, and service bulletins, but apparently not for vehicle years prior to 2017, although this severe failure is seen on 2014 and later; and the manual tests/diagnostics that a person can do in a pinch per the bulletin, recall notice, and articles; and in his trials of how to tell if it is a failure or fleeting problem - nothing alleviated it, all the symptoms are present and system is failing and continually bringing up the brake assist service alert. This is the info that we found on the recall, but didn't appear to cover 2016 year models: [NHTSA campaign number: 20V603. GM's own number for this recall is N202300860.] We plan to get this yukon over to Guaranty Chevrolet in Junction City Oregon tomorrow 10/8. The only thing that has been very recently noticeable preceding this in recent week or so is a slight uneven braking feeling in the motion of the car when coming to a stop. Which it has not done before.

While taking my children to school, the vehicles RPMs began to jump, causing the vehicle to lose power. Which resulted in myself and two children stranded on the side of the road. The vehicle had just crossed over 110,000 miles when the transmission completely broke apart from the inside. There was no other warnings or lights that appeared on the dash prior to or after. We had been given an estimate from GM for $6200 for a new transmission.. but that was extremely difficult to afford. We ultimately had to have the transmission rebuilt due to it costing $3,000 less, so we could continue going to work. We are still having issues with the transmission even after taking to back for a 2nd time to be reprogrammed. It’s extremely frustrating to have paid so much for this Yukon to have transmission go out with as many miles as it did, plus with no warnings.

i HAVE A SERVICE SUSPENSION LIGHT THAT CONTINUES TO POP UP ON DASHBOARD THE MOST IMPORTANT ISSUE THAT NEEDS TO BE ADDRESSED IS THE BRAKE LIGHTS. I have previously had the passenger side brake light stop working. In order to repair this you have to order a whole new taillight. My vehicle was approximatly 6 years old when this started happening. First incident (2022 with approximately 65000 miles) Yesterday, I was pulled over by a policeman and both of my brake lights are not working. We found a way to sauder (I know this is incorrect spelling) the broken metal piece back together in the taillight; however, this is not the correct way to fix the underlying problem and clearly it is only a temporary fix because the passenger side broke again in a new spot.

The transmission malfunctions, shifting is inconsistent and shifts by itself. Shudders and causes the engine to increase and decrease in RPMS. This causes the engine to lose power. The truck will slow because of bad shifting and stall. The dealer did a diagnostic test and verified the transmission problem. The vehicle was inspected by the vehicle brand dealership. There were no warning lights or any other signs of the transmission failure.

Brake light keeps going off and on it’s like a short but when checked everything is connected

During standard braking operations the vehicle (not a hard emergency situation) on dry ground the vehicle seems to activate the abs system or something similar which makes the braking effort non standard and increases stopping distance. The issue has occurred occasionally for over a year but is becoming more frequent. It has occurred at both highway speeds of 55 mph and almost stopped during parking activities of 2mph.