Ford Windstar 2003

If the brackets were not installed properly, the rear axle may fracture, affecting the vehicle handling and increasing the risk of a crash.

Ford will notify owners, and dealers will inspect the brackets to verify their proper installation. If a bracket is found to have been misinstalled, the rear axle will be replaced. These repairs will be performed free of charge. The began on October 21, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S27.

A SEPARATION OF A FRONT LOWER CONTROL ARM REAR ATTACHING BRACKET MAY RESULT IN A LOWER CONTROL ARM SEPARATION. A SEPARATION OF BOTH FRONT SUBFRAME REAR BODY MOUNTS MAY RESULT IN SEPARATION OF THE STEERING INTERMEDIATE SHAFT. EITHER CONDITION COULD RESULT IN SIGNIFICANT LOSS OF STEERING CONTROL, INCREASING THE RISK OF A CRASH.

DEALERS WILL INSPECT BOTH FRONT LOWER CONTROL ARM REAR ATTACHING BRACKETS AND BOTH BODY MOUNT ATTACHMENTS AT THE REAR OF THE FRONT SUBFRAME AND MAKE THE NECESSARY REPAIRS FREE OF CHARGE. THE RECALL BEGAN ON JUNE 18, 2012. OWNERS MAY CONTACT FORD AT 1-866-436-7332.

A FRACTURED AXLE MAY RESULT IN A LOSS OF VEHICLE CONTROL, INCREASING THE RISK OF A CRASH.

FORD WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT AND INSTALL A REINFORCEMENT BRACKET ON THE REAR AXLE OR REPLACE THE AXLES, AS NECESSARY. THIS SERVICE WILL BE PROVIDED FREE OF CHARGE. THE RECALL BEGAN ON JUNE 1, 2012. OWNERS MAY CONTACT THE FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.

A FRACTURED AXLE CAN AFFECT VEHICLE HANDLING AND INCREASE THE RISK OF A CRASH.

FORD WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT AND INSTALL REAR AXLE REINFORCEMENT BRACKETS, OR REPLACE THE AXLES, AS NECESSARY. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE RECALL BEGAN ON JUNE 19, 2012. OWNERS MAY CONTACT FORD AT 1-866-436-7332.

THIS COULD RESULT IN REDUCED STEERING CONTROL INCREASING THE RISK OF A CRASH.

DEALERS WILL INSPECT BOTH FRONT LOWER CONTROL ARM REAR ATTACHING BRACKETS, AND BOTH BODY MOUNT ATTACHMENTS AT THE REAR OF THE FRONT SUBFRAME, AND MAKE THE NECESSARY REPAIRS FREE OF CHARGE. IF REPAIRS CANNOT BE MADE TO A VEHICLE, FORD WILL OFFER TO REPURCHASE THE VEHICLE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE FEBRUARY 21, 2011. OWNERS MAY CONTACT FORD AT 1-866-436-7332.

A FRACTURED AXLE CAN AFFECT VEHICLE HANDLING AND INCREASE THE RISK OF A CRASH.

AS PARTS BECOME AVAILABLE, DEALERS WILL INSPECT AND IF NECESSARY INSTALL THE REAR AXLE REINFORCEMENT BRACKETS FREE OF CHARGE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 20, 2010. OWNERS MAY CONTACT FORD AT 1-866-436-7332.

A VEHICLE FIRE COULD OCCUR WITH OR WITHOUT THE ENGINE RUNNING.

FORD WILL NOTIFY OWNERS THAT DEALERS WILL INSTALL A FUSED WIRING HARNESS IN LINE WITH THE SCDS. ON 1999-2003 WINDSTAR VEHICLES WITH A LEAKING SCDS, DEALERS WILL ALSO INSPECT THE ABS CONTROL MODULE CONNECTOR AND REPAIR AS NECESSARY. REPAIRS WILL BE COMPLETED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 27, 2009. OWNERS MAY CONTACT FORD AT 1-888-222-2751.

FAILURE OF THIS CONNECTION COULD LEAD TO FUEL SPILLAGE AND, IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.

UFI WILL NOTIFY OWNERS AND REPLACE THE FILTERS FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 4, 2006. OWNERS MAY CONTACT UFI FILTERS USA AT 800-230-5876.

IF THE LATCHES ON TH4E SECOND OR THIRD ROW SEATS OF THE VEHICLE RELEASE IN A CRASH, THE POTENTIAL FOR OCCUPANT INJURY IS INCREASED.

DEALERS WILL REPLACE THE SEAT-TO-FLOOR LATCHES ON THE SECOND AND THIRD ROW OF SEATS. OWNER NOTIFICATION BEGAN ON NOVEMBER 21, 2003. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.

Issue: This recall is for aftermarket replacement rear window glass produced by Vitro Automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: This is a voluntary recall that is not being conducted under the requirements of the Motor Vehicle Safety Act. Safety Risk: Glass that breaks in to large pieces could create a risk of injury. Corrective Actions: The company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “DOT 287” along with the lettering “VMR” (Replacement Market) and a date code that is before July 2019. This information is printed on the bottom corner of the glass. Consumers should contact Vitro's customer service at 1-412-995-6457 or argbacklites@vitro.com to arrange for replacement of the glass.

On certain vehicles that had rear axle reinforcement brackets installed as part of safety recall 2010-284, the brackets may not have been installed properly, which could limit the effectiveness of the recall service repair in addressing the safety defect. Safety recall 2010-284 was conducted to address the risk that the combined effects of corrosion and stress can lead to a complete fracture of the axle. If the rear axle fractures, and the reinforcement brackets were not installed properly, vehicle handling may be adversely affected, increasing the risk of a crash. Correction: Dealers will inspect the rear axle reinforcement brackets that were installed as part of recall 2010-284. If one or both brackets are found improperly installed, the dealer will replace the rear axle.

On certain vehicles, the subframe may not have been properly e-coated during the manufacturing process. As a result, the subframe of vehicles originally sold, or currently registered, in areas of heavy road salt usage during winter months (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador), may rust over time, resulting in reduced durability of the front lower control arm rear attaching brackets and body mount attachments at the rear of the front subframe. A separation of a front lower control arm rear attaching bracket may result in a lower control arm separation. A separation of both front subframe rear body mounts may result in diminished vehicle directional control. Either condition could result in reduced steering control, which may lead to a crash causing property damage and/or personal injury. Correction: Dealers will inspect the front lower control arm rear attaching brackets and body mount attachments at the rear of the front subframe. If the front lower control arm rear attaching brackets are not cracked, perforated, or exhibiting significant metal loss, and if the front subframe at the rear body mount locations are not cracked with metal separation aft of the rear body mount, and if the front subframe is not cracked or perforated in the area between the rear body mount and the front lower control arm rear attaching bracket, the vehicle will be returned to its owner and the owner will be notified when to return for installation of reinforcement brackets.

On certain vehicles registered and operated in areas where road salt is used on the roadways during winter months for extended time periods (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland-Labrador), the rear axle may corrode and fracture. If the rear axle fractures, vehicle handling may be adversely affected, creating the risk of a crash. Correction: Dealers will install rear axle reinforcement brackets.

On certain vehicles, the speed control deactivation switch may overheat, smoke, or burn, potentially resulting in an underhood fire. The condition may occur either when the vehicle is parked or when it is in operation. Correction: Dealers will install a new switch or fused wiring harness. Note: This is an expansion of recall 2005028 (05S28) for vehicles not previously included in the campaign.

Certain vehicles do not comply with the requirements of CMVSS 120. The Standard specifies that for vehicles other than passenger cars, the label information shall display after each GAWR, the size designation and, if applicable, the type designation of rims. This information was inadvertently omitted from the compliance label affixed to the affected vehicles. Correction: Since this does not pose any safety risk, no corrective action is required.

On certain vehicles, the 2nd and 3rd row bench seat-to-floor latches do not meet FMVSS 225 load requirements and can release under load. Correction: Dealer will replace the seat latches on the 2nd and 3rd row seats.