Ford Flex 2015 — Reported problems

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rear-view camera was intermittently inoperable. The dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 82,000.

The contact owns a 2015 Ford Flex. The contact stated that while the vehicle was in reverse(R), the rear-view camera displayed a blank image, a blue image, a distorted image, or the message “Camera Unavailable” was displayed. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was notified several times of the failure, and the contact was informed that the part for the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the failure, and the contact was provided similar information that was provided by the dealer.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while shifted in reverse, the rear-view camera failed to display a clear image. The local dealer was contacted on a separate occasion, and the rearview camera was replaced; however, the failure reoccurred. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 130,000.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part for the repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the part to be available. While in reverse, the back over prevention camera displayed an inverted image. However, within the past 3 months, the camera failed to operate as needed and displayed the message, “Camera Unavailable”. The dealer was contacted several times. The dealer informed the contact that parts would be available in April and then stated June. The dealer most recently informed the contact that only Mustangs were being repaired, and there was no ETA when parts would be available. The manufacturer was made aware of the issue. The failure mileage was approximately 98,000.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while reversing, the rear-view camera failed to display an image. The dealer was made aware of the failure but confirmed that parts were not yet available. The manufacturer was notified of the failure by phone. The failure mileage was approximately 100,000.

The contact owns a 2015 Ford Flex. The contact stated that while the vehicle was in reverse, the rear-view camera displayed a blank screen with the message “Camera Unavailable” displayed. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was contacted by phone and made aware of the failure. The failure mileage was approximately 15,500.

The contact owns a 2015 Ford Flex. The contact stated that while reversing, the message “See Dealer Soon” was displayed, the rear-view camera independently turned off, and the screen was blank. The dealer was made aware of the failure by phone. The vehicle was taken to the dealer, and the contact was informed that the parts were unavailable to repair the vehicle. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The manufacturer was contacted by phone, and a case was filed. The contact was referred to the NHTSA Hotline to report the failure. The failure mileage was approximately 45,000.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while reversing, the rear-view camera displayed a blank image. The dealer was made aware of the failure but confirmed that parts were not yet available for the recall repair.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The contact stated that while in reverse(R) on several occasions, the rear-view camera screen was black with the message "Contact Dealer" displayed. The contact stated that the home screen on the rear-view camera failed to turn on. The contact stated that on three occasions while in reverse(R), an individual was nearly struck by the vehicle. The vehicle was taken to a dealer but was not diagnosed or repaired. The contact was informed that there was no current fix for the failure. The manufacturer was notified of the failure. The failure mileage was approximately 70,000.

UNKNOWN The rear camera (when available) is UPSIDE DOWN! At night, the image also has wide lines running through it. Sometime, the camera just shows a message that it is unavailable. So FRUSTRATING!

The contact owns a 2015 Ford Flex. The contact stated that upon reversing the vehicle the rearview camera display would display upside down and then display blank and no warning lights were illuminated, however the following warning message would display on the instrument panel "camera unavailable, please contact your local dealer". The local dealer was contacted however the vehicle was not repaired as the contact was advised that the remedy for NHTSA campaign number :25V695000 (BACK OVER PREVENTION) was not yet available. The manufacturer was not notified of the failure. The failure mileage was 120,000.

The contact owns a 2015 Ford Flex. The contact stated that while reversing, the rear-view camera was blank. There was no warning light illuminated; however, the message was "Camera not Available - Please Contact your Dealer" was displayed on the instrument panel. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION). The local dealer was contacted; however, the vehicle was not repaired because parts were not yet available for the recall repair. The manufacturer was contacted but was not notified of the failure. The failure mileage was 65,000.

Rear view camera under recall. Told by Ford for 3 months in a row that should receive paper in mail for recall repair. Have not received paper. Very dangerous backing up.

Rear Camera no working. This Ford recall has been out for 3 years now and we still cannot get a remedy for our vehicle!

See attached document for complaint.

Rear (Backup} camera malfunctioning. Recall 25V6595. Two (2) Dealers state that there is no recall (Fritt's Ford, Raceway Ford Riverside Ca). VIN [XXX] This is ongoing. There was no accident. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. While reversing, the back over prevention camera image appeared upside down, or the message “Camera Not Available" was displayed. The vehicle was not repaired. The failure mileage was 160,000.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The contact stated that on several occasions, while in reverse (R), the image was flipped upside down or the screen was blank. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was unknown.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that upon purchase from an independent local dealer and shifting into reverse(R), the rearview camera failed to display a clear image. The screen was black. No warning light was illuminated. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 130,000.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated that back over prevention screen was black while shifted into reverse. The approximate failure mileage was 115,000.

My 2015 Ford Flex is affected by recall 25V695 for the rear view camera inspection. I contacted my local Ford dealership to have the recall addressed and was told that no remedy parts are available at any dealership. They could not provide a timeline for when parts would be in stock. This vehicle is part of my commercial fleet and cannot be operated or rented until the recall is resolved. I am losing over $1,200 per month in revenue because Ford issued a recall with no fix available. Owners should not be forced to absorb open-ended financial losses because the manufacturer cannot supply the parts needed to complete its own recall.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while in reverse(R), the back over prevention camera intermittently failed to operate before the back over prevention camera permanently failed to operate. The dealer was contacted. The manufacturer was not made aware of the issue. The failure mileage was approximately 140,000.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while in reverse(R), the back-over prevention camera shut off intermittently. The dealer was not contacted. The manufacturer was not made aware of the issue. The failure mileage was approximately 62,000.

The contact owns a 2015 Ford Flex. The contact stated that in the past 6 months, the rear-view camera was frequently inoperable. The contact stated that the failure of the camera was intermittent at first. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The local dealer was contacted once the failure became more frequent. The camera failure became more frequent, and the contact was advised that the part was not yet available for the recall repair. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed of the failure. The failure mileage was approximately 100,000.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.

The contact owns a 2015 Ford Flex. The contact stated that the rear-view camera image was displayed upside down or sideways and was intermittently flashing. The contact experienced dizziness while viewing the camera display. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The local dealer was contacted and confirmed that parts were not yet available. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 90,000.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The contact stated that the camera was inoperable. There were no warning lights illuminated. The local dealer was contacted and stated that parts were on back order. The vehicle was not diagnosed or repaired. The manufacturer was called, but there was no response, and the call went to voicemail. The failure mileage was unknown.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that while in reverse(R), the rearview camera would display a blank or distorted image. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. Neither the dealer nor the manufacturer was made aware of the failure. The failure mileage was unknown.

The contact owns a 2015 Ford Flex. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while in reverse, the back-over prevention camera went black or displayed a message to the driver to see the dealer. The dealer was contacted and confirmed that parts had been ordered; however, parts were not received, and the contact was still waiting for parts to be provided. The manufacturer was not made aware of the issue. The failure mileage was approximately 123,000.

The contact owns a 2015 Ford Flex. The contact stated that the back-over prevention camera image was displayed upside-down. There were static lines on the screen, and the camera became inoperable. The message to “Contact Dealer” was displayed. The local dealer was contacted, and it was determined that the camera needed to be replaced. The dealer informed the contact that parts were on backorder. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was unknown.

I am having the same issues that were recalled in the 2019 Ford Flex backup camera. My 2015 Ford Flex backup camera is malfunctioning, going black, flipping the image and flashing randomly. It has progressively gotten worse.

I contacted Ford about my issue when I learned that recalls on other Ford products were issued for my fault. I was told that there was no recall for this issue and they would only fix it if I paid for it. Since then a recall for 2015 Ford Flex has finally been issued. My 2015 Ford Flex is experiencing backup camera issues the same as reported in the 2015 Flex recall issued earlier this year. I have talked to local Ford dealers as well as Customer Recall Support. They all say that since it is not included in the recall list they will not fix it. I will have to pay for diagnosis plus any repair costs. Since this is already stated to be a Safety Issue, I feel that it should be fixed by the manufacturer. Just because they did not include my VIN in their recall list should not be an excuse for not fixing the Safety Problem. I asked for a list of the serial number range of the recall but they would not provide. When I requested to speak to higher management they also declined to give me that information as well. I have been involved with high volume manufacturing for over 50 years and know that although every attempt to quantify a range of products with a certain defect may be made, it is not possible to 100% guarantee that there is not an outlier in the distribution. As the watchdog for defective automotive product (especially Safety Issues) I feel that NHTSA should be involved and assist me in getting Ford to correct this Safety issue.

back up camera works intermittently. black screen, camera not available, works for short period of time then goes blank, and upside down camera have all been exhibited .

The contact owns a 2015 Ford Flex. The contact stated that while reversing, the back-over prevention screen failed to function as intended. Additionally, the message “Camera not Available” was displayed. The contact stated that the failure was intermittent. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 115,000.

Steering Service Fault and Avancetrac Service popped up while driving, vehicle has 110k miles. Lost all power steering, so we pulled off into the closest parking lot. Code U3000 pulled up with a code reader, waiting to have vehicle towed to Ford for a solution.

The contact owns a 2015 Ford Flex. The contact state that while driving on two occasions at undisclosed speeds, the vehicle lost power steering functionality and the steering wheel became very stiff. The "Power Steering Assist Fault" message was displayed. During the first failure, the contact pulled over to the side of the road and the vehicle was towed to a dealer; however, failure was no duplicated. The contact stated that during the second failure, the vehicle was taken to the residence. The manufacturer was notified of the failure. The failure mileage was approximately 130,000.

The back up camera has been malfunctioning for nearly two years; if T something that happens randomly I contacted Ford and they said it’s my responsibility to get it repaired because it’s not an issue on our 2015 Ford Flex when in fact many 2015 Ford Flex were recalled for the same issue I have images of the malfunction proving the problem

The rear backup camera works intermittently and often the screen will display a message that 'Camera is unavailable. Please contact your dealership.' At this point, the camera does not work and the screen will not display the view.

The contact owns a 2015 Ford Flex. The contact stated while reversing, the back-over prevention camera displayed a black screen. The contact stated that the failure had occurred several times. The contact stated that occasionally the images were displayed upside down. In addition, the contact stated that occasionally the back over prevention camera failed to turn off. The vehicle was taken to the dealer where it was diagnosed with back over prevention camera failure. The contact was informed that the option was to recalibrate the software or replace the back over prevention camera. The vehicle was repaired. The contact stated that the recalibration was performed; however, the failure reoccurred. In addition, the contact stated the vehicle was previously taken to the dealer several times due to persistent failure. The manufacturer was made aware of the failure and a case was filed. The contact referenced an unknown recall; however, the VIN was not included. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 100,000.