Chrysler Pacifica 2020 — Problemas relatados

The contact owns a 2020 Chrysler Pacifica. The contact stated that while driving 35 MPH, the second-row driver's side seat adjuster latch failed to lock as intended. The contact's minor child was seated in the seat when the seat independently moved forward and backward. The contact stated that two days later, the second-row passenger's side seat adjuster latch failed to lock as intended. The vehicle was taken to the dealer where it was diagnosed with failed seat cable latches. The contact was informed that the seat cable latches needed to be replaced. The contact was informed that the repairs were not covered under recall. The contact was informed that the failures were normal wear and rear. The manufacturer was contacted, and a case was filed. The failure mileage was approximately 64,900.

Over the past couple of years the auto start-stop system has progressively gotten worse with erratic issues. I've been to the dealership, and have replaced the main and aux batteries multiple times to reset the system and fix the problem. New batteries do not fix the problem. The vehicle's electrical system has turned off the engine and stalled multiple times in the middle of intersections. The vehicle has shut down twice while attempting left turns across lanes of oncoming traffic and three times pulling from a side street onto a major road. This has started to happen everyday and is posing a safety issue for my two young children, family, and other motorists. This electrical issue is a well known problem of this model and multiple calls to the manufacturer and the dealership leaves me in the middle where neither want to provide a path for assistance as the dealership explains my issue as a manufacturer problem. In the past 3 weeks the electrical issue has impacted the vehicles ability to consistently start, sometimes the engine won't turn over and I have to jump the vehicle on an increasing basis. The start-stop system has created further electrical problems where the start-stop dash signal is on constantly, the dashboard lights up sporadically, and today the vehicle would not unlock by using the key fobs and with no physical key I am not able to access the vehicle.

File an Immediate NHTSA Safety Complaint (Do This Tonight) The vehicle intermittently stalls completely while decelerating or braking at low speeds when the engine is warm. The dashboard flashes an ACC/FCW warning as the engine dies. This requires a full shift into Park to restart in active traffic, creating an imminent crash hazard. The vehicle has only 26,000 miles. Chrysler Case #98023933 is refusing to authorize diagnostic flight data logging or precautionary repairs because the dealer cannot immediately replicate it." •

My 2020 Chrysler Pacifica Plug-In Hybrid (VIN [XXX]) is covered by safety recall NHTSA 26V-362 / FCA 52D (shown as "Recall Incomplete" on NHTSA's VIN lookup as of October 17, 2026), high-voltage battery fire risk. FCA advises owners not to charge the vehicle and to park it outside, away from structures, until it is repaired. FCA's dealer notice states the remedy for 2020-2021 model-year vehicles became available June 12, 2026. Shortly before drop-off, the vehicle's electronics began failing intermittently; no battery warning messages appeared and there was no fire. I purchased the vehicle from Clay Cooley CJD Ram (Irving, TX) on November 27, 2020. I presented it to Meador Chrysler Dodge Jeep Ram, Fort Worth, TX on August 18, 2026 (repair order [XXX]) for this recall. As of [XXX], 65 days later, the recall repair has not been completed and the vehicle has not been returned. The dealer has provided no status updates. The dealer provided a loaner that is far below the Pacifica in quality, with much worse fuel economy. Under 49 U.S.C. 30120(c), failure to repair within 60 days after presentation is prima facie evidence of failure to repair within a reasonable time. I request that NHTSA look into FCA's remedy timeliness and parts availability for this campaign, including replacement battery packs, which FCA's remedy instructions say are ordered through its STAR Center only after approval, and whether FCA has met its remedy obligations for this vehicle. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

While standing sideways, my left shoulder towards the rear of the car, I pushed the open hatch button. The automatic door began to rise and lifted me up and tossed me against some metal furniture that was behind the car, in the parking lot of a deli. It was over in a second, I couldn't step out of the way because I was holding two bags of firewood, one in each hand, and there was a tall curb, say ten inches high that prevented me from moving quickly out of the way. The automatic return function failed and the power gate just lifted me off my feet and I landed badly on the metal stadium type chairs severely injuring my ribs. It took me a minute to compose myself and rise, shut the hatch and hobble to the drivers door and drive home. The next day I tested the auto return function on the hatch and with the smallest amount of resistance it worked, and auto reversed and closed, multiple times. I could not and can not repeat the failure. I weigh over 250 pounds and am amazed that the hydraulics had that much force to be able to lift me off my feet. My ribs still hurt 2 weeks later but are definitely on the mend. No one witnessed the accident, it may have been captured on video at the store? I have not taken the vehicle anywhere for testing. I believe it may have been raining lightly.

I took my 2020 Chrysler Pacifica Hybrid (VIN: [XXX]) to Sames Bastrop Chrysler Dodge Jeep Ram in [XXX], to have Safety Recall 52D performed on the high-voltage battery. Prior to bringing the van in, the vehicle was driving and charging completely normally with no charging errors. Sames performed the recall software update to the Battery Pack Control Module (BPCM) under Recall 52D, but their diagnostic scan logged an active high-voltage fault code (DTC P0E15-00 for the battery pack coolant heater) and a stored bypass valve code (DTC P0E7C-00). Despite these active thermal management codes showing up in their system, the technician marked the vehicle as passed and returned it to me. After driving the van home the vehicle completely refused to charge on my very first attempt at home. The dashboard displayed a "Service Battery" warning message, and the charging system has been completely locked out ever since. This is a serious safety concern because the high-voltage battery recall was issued specifically to prevent battery fires and thermal runaway caused by internal cell defects. Returning a hybrid vehicle with an active thermal management failure during a fire-related recall leaves the battery vulnerable to overheating and disables the charging safety systems. The van was returned to [XXX], where it has sat for over a month. Sames initially stated that Stellantis was refusing to cover the battery replacement even though federal law requires safety recall remedies to be completed free of charge regardless of mileage. The charging failure and trouble codes have been confirmed by the dealership under Repair Order #XXX. I have also opened an active corporate case directly with the manufacturer under Stellantis Case #XXX, and Sames has provided a temporary rental vehicle through Enterprise while this is investigated. The van and all of its original high-voltage components are currently in the service bay at [XXX]. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

I was about to pull out into a main road with my 3 kids in the car, and my steering wheel locked up and became impossible to drive, had to quickly reverse and could not make it home. I then received an error message on my dash saying power steering unavailable, service requested. The car only has 118,000 miles on it.

I experienced a sudden loss of power and steering while driving my vehicle. The screen advised me to pull over because the engine would shut off soon, but I already had lost steering and power. I turned the car off and was able to restart it and drive it 1 mile home, and the check engine light was on. I had it towed to the dealer. After 2 weeks of testing, the dealer reported, “When your vehicle was initially checked in, the following trouble codes were present: 5 BPCM FAULT CODES P1A21-00, P1D43-00, P1C01-00, P1A2A-00, and P1A29-00. We have completed Recall Y40.” The repair tech said they expected the engine to lose power again at some point and I would need to have it towed in again to be repaired then. The repairs made so far are only software updates, no hardware has been repaired because the dealer said the errors didn’t recur after they reset the system. I have elevated the issue with the dealer and am awaiting a response. I am concerned based on the error codes and technician information that my vehicle is still at risk of catching fire at any time or experiencing another catastrophic loss of power if the faulty hardware is not replaced.

Our family was driving and our teen in the third row said his seatbelt came apart. We pulled over to inspect. He was in the third row driver side seat. The stitching for the seatbelt and the seat had disintegrated. There is a sticky residue but no stitching. The leather is in pieces and the seatbelt is unusable. This vehicle is used for family transport so there is no known cause as to why this would have happened. The middle seatbelt stitching is also disintegrating

We own a 2020 Chrysler Pacifica Hybrid that had been operating without any significant issues for approximately six years. Recently, the vehicle was subject to a recall involving the charging system, and we brought it to the dealership to have the recall work completed. Nine days after the recall service, the vehicle would not start and displayed a “Service Charging System” error message. The dealership arranged to have the vehicle towed back for evaluation. They kept the vehicle for approximately a week and a half but ultimately stated that they were unable to identify any problem. We were charged $200 for the diagnostic evaluation, and our insurance covered the cost of the tow. Approximately 10 days after receiving the vehicle back from the dealership, it again failed to start and displayed the same “Service Charging System” error. Given that we had no significant issues with the vehicle for approximately six years and that this problem began only nine days after the recall work was performed—and has now occurred twice—we are very concerned that the issue may be related to the recall service or that the underlying problem was not identified during the dealership’s initial evaluation.

Vehicle has suffered from electrical issues since 2023 with effects to front windows causing window to reverse down when trying to roll up, radio malfunctions that is a known Chrysler issue that removes the ability to control rear entertainment center from front screen leaving the feature unusable with small children in the rear for long periods of time, rear cross traffic warning detection malfunctioning and not making audible alarms or warning with vehicles and pedestrians behind vehicle, loud noises when braking that according to Chrysler TA is potentially the ABS system wanting to engage but didn't, electrical shorts causing intermittent surging of interior lights - slower functioning of sliding doors - shorted out multiple window washer pump systems leading to replacement - lane departure system malfunctioning causing vehicle to drastically steer vehicle towards a curbed center island in which I as the driver had to manipulate the wheel to avoid crashing - passenger slider door at time malfunctions causing the door to repeatedly open and close on it's own and also open on its own while vehicle was underway in reverse - blind spot monitoring system malfunctioning at times to not warn of vehicles in blind spot - vehicle stalled twice with check engine light on but no recorded data in computer of the events ever occurring. All of these issues have been inspected under both factory warranty and extended Mopar warranty with service department stating they could not replicate the error and no further investigation or diagnosing was completed. After "repair attempts" were made the malfunctions reoccurred with another service appointment being needed and more electrical errors happening over time. Per service department there were no DTC or check engine lights for our malfunctions, however years later they finally admitted there had been DTC logs but were ignored and not diagnosed. We feel the safety of our family and public are at great safety risk from the failures.

Backup camera goes in and out and then blue.

The contact owns a 2020 Chrysler Pacifica. The contact stated that while driving at higher speeds and attempting to veer over to the left or right, the steering wheel failed to return to center. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 90,000.

Intermittent power steering loss, when I turn van off and back on and go in reverse it stops sometimes.

Head gasket is cracked causing cylinder 5 to misfire and burned up coolant in the engine causing the engine to overheat while driving and put safety of driver and passengers in danger while vehicle was traveling at high speeds.

Driving down a road, Power Steering warning light came on, and the power steering went completely out. My wife was driving, and is not strong enough to steer manually. She was able to partially get off the road to stop. Needed other drivers to help get it off the road. We had it towed to a repair shop, and they said the electronic components replaced and only the dealerships do it. Made an appointment and will have to pay to have it towed to the dealership

I purchased my 2020 Chrysler Pacifica in January 2020. By April 2021, I began experiencing ongoing issues that have never been fully resolved. In the six years I have owned this vehicle, I have gone through six batteries. The vehicle has stalled in the middle of the road and, at other times, has failed to start altogether. The vehicle also does some jolting randomly which can be very harsh to the passengers inside. I specifically purchased this vehicle because of its safety features, as I have young children. Unfortunately, these repeated failures have left me feeling unsafe and concerned about the reliability of the vehicle. Each time I have brought the Pacifica to the dealership, the battery has been replaced or recharged and I have been told the issue was fixed. However, within six months to a year, the same problem returns and the vehicle is back in the shop. The issue has occurred again, and I am at a loss as to what to do next. It is clear that there is an underlying problem that has not been properly diagnosed or repaired. After six years of recurring breakdowns and unsuccessful repair attempts, I have been unable to fully enjoy or rely on this vehicle. I am requesting that this matter be taken seriously and that a thorough investigation be conducted to permanently resolve this ongoing issue. Given the repeated repair history and the safety concerns involved, I believe this situation warrants immediate attention.

On October 7, 2024, my vehicle was serviced at Coastal Chrysler Dodge Jeep Ram for a front-end rubbing/scrubbing noise that increased with speed. The dealer diagnosed both front hub assemblies as failed and replaced both front hub assemblies. I was charged a total of $2184.41 for the repairs, including parts and labor. In less than two years, I again experienced significant front-end noise and safety concerns. On May 19, 2026, because I urgently needed the vehicle and was unable to obtain a timely appointment with the dealership, I took the vehicle to a well-regarded independent repair facility, Koala Automotive Repair LLC. Their findings were extremely concerning. The mechanic documented that: The front wheel bearing was completely worn out. The axle had ripped due to contact with the strut assembly. Bolts on the hub bearing assembly were “very loose” and reportedly “finger loose” The vehicle owner stated that the hubs had recently been replaced by the dealership The independent mechanic further advised that the components replaced in October 2024 should still have been under dealer warranty, and that the second repair involved the same components and directly related failures. I am deeply concerned that: Components replaced by the dealer failed again prematurely; The loose hub bearing assembly bolts may indicate improper installation or insufficient torque procedures during the prior dealer repair; and The subsequent failure created additional damage to the CV axle and related front-end components. This situation caused: Significant unexpected repair expenses: I had to spend a total of $1,932.71 for the second repair. Loss of use of the vehicle. Safety concerns for myself and my passengers. Additiona

car goes into park while driving

Driver side air bags did NOT deploy resulting in injury

I am writing to formally express my dissatisfaction with the handling of repairs on my Chrysler Pacifica and the significant financial and personal impact this situation has caused my family. The issue began when the engine suddenly stopped, leaving us stranded. The vehicle was first taken to an insurance-recommended shop that could not diagnose the issue, then transferred to Wischsnewsky Dodge in Baytown, TX. There, we were told the problem was the starter and fuse box. Based on their professional assessment, we approved costly repairs, which required financing. However, just one day after picking up the vehicle, it failed to start again. This not only showed a lack of proper diagnosis, but also placed my wife and children in an unsafe situation. We were also forced to cancel a prepaid family trip due to lack of transportation. The dealership retrieved the vehicle and promised a loaner, but none has been provided after more than two weeks. We have since incurred additional expenses for rentals and rideshare services. We are now being told the issue may be a head gasket failure—something that could have been identified earlier with a basic test and is reportedly a known issue with this model. The estimated cost to replace the engine per the dealership is $16,000. At this point, we have taken on debt for ineffective repairs and continue to face mounting costs without a clear resolution. I am requesting immediate assistance from Chrysler to address this situation and provide a fair outcome.

Back up camera works intermittently and freezes or shows incorrect image. Wife almost backed into another car/family because the camera froze showing a clear driveway when there actually was a car there. We have an appoint with the dealership next week to investigate. Has not been inspected by police or insurance. No warning lights or messages came.

I have a 2020 Chrysler Pacifica. There was a recall last year and I brought it in to the dealership. At that time, I wasn't even sure what the recall was for. This year, about a month ago, I was driving (I take XXX to work everyday) and the display had a notice that said "Stop safely, the engine will turn off". I pulled over and turned the car off and turned it back on. The check engine light came back on but it drove fine. The check engine light eventually went off but the same thing happened again a few days later. I brought it into my mechanic who couldn't read the diagnostics. I brought it back into the dealership and they said I just needed a software upgrade so they did that. Unfortunately, the engine died again on the road. I shut the car off and turned it back on. I brought it back to the dealership and said the issue wasn't fixed. They haven't taken the issue seriously so I started searching and found this issue. It sounds like Chrysler is aware of the issue but I'm nervous even a new transmission won't fix the issue. In the meantime, I've had to rent a car as the dealership doesn't do loaners. This is a pretty big safety issue as now my car has shut down on the middle of the highway multiple times! [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Third row randomly closes on my kids who are buckled in them. I've reported this to the dealer shortly after getting my van in 2021. Brought it back to them twice where they found "no problem", then I made an additional report here last year after it closed on them an excessive amount of times and I felt helpless. I was forced to move the child who was sitting in the back to front seat after it closed on them multiple times in one ride. A head on collision occurred a few miles down the road with my child in front seat. He was injured more than he should have ever been, due to needing to be moved from the rear of the van. Furious Chrysler did not take my previous complaints more seriously.

Driver side airbags failed to deploy during total loss head on collision.

When driving on highway, electrical system started beeping and showing various signals, could no longer keep speed or accelerate. Had to put on warning lights and coast to side of road with four small kids in car. Was able to pull off to side and slowly get to safe location by resting vehicle in between events. When fully charged, didn’t seem to have issue so was able to drive to dealer. Thought was related to engine switching from electric to gas power. Dealer checked and performed two software updates. On way home from dealer, same problem occurred on highway. Super dangerous to loose all acceleration or same speed on highway! I got a video of second event as I was a passenger and my husband was driving. But as can see in video the car has a charge so the incident is not related to the switch from electric to gas power. Now we are very concerned whether Chrysler has the means to fix this at all and or whether the dealership will be actually able to identify the issue given the car was literally being driven home from the dealer. Attaching photos but have a full video. First time happened on April 4, 2026. Second on April 16, 2026

Vehicle steering locked up while driving causing driver to end up in oncoming traffic. Also, vehicles remote start turns on, but after a few seconds car shuts off.

The contact owns a 2020 Chrysler Pacifica. The contact stated that while driving approximately 45 MPH, the vehicle started losing motive power. The vehicle stalled with the check engine light and several other unknown warning lights illuminated. The vehicle was restarted; however, the check engine warning light remained illuminated. The vehicle was taken to a local dealer to be diagnosed, and it was determined that there was an electrical failure in the transmission. The vehicle was not repaired. The contact stated that prior to the failure, the vehicle was repaired under NHTSA Campaign Number: 23V010000 (Electrical System, Hybrid Propulsion System); and associated the failure with the recall. The manufacturer was informed of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 113,000.

The contact owns a 2020 Chrysler Pacifica. The contact stated that while turning to the right, the steering wheel seized, and the vehicle became difficult to maneuver. The contact stated that force was needed to maneuver the steering wheel. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The contact stated that the failure persisted and became a worsening failure. The steering wheel seized while turning to the right or the left. The vehicle was not taken to the dealer or an independent mechanic. Upon further investigation, the contact became aware that the failure was most common with similar vehicles between 60,000 and 90,000 miles. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 90,000.

The start/stop system fails while car is running. Power not delivered appropriately resulting in check engine light coming on and entire car shaking. Only 62k miles. Started at 58k.

Many times over the past 6 months the power steering assist goes away while driving at highway speeds. The steering wheel sort of locks up and it becomes difficult to turn. After much effort the wheel will turn and the steering returns to normal. It has happened at speeds as low as 40 mph and as high as 50 mph. This has occurred in heavy traffic situations. I have never had a dealer look at the problem. No warnings or messages from vehicle.

The hybrid propulsion system on my 2020 Chrysler Pacifica Plug-In Hybrid has repeatedly failed, resulting in sudden and complete loss of power while driving at highway speeds. The vehicle enters full limp mode, displays a red turtle warning light, and the motor cuts out entirely, creating a serious collision risk. The failure occurs without warning and has happened on multiple occasions. The root cause has been traced through escalating component failures: first the Power Inverter Module (PIM) was found to have an internal failure disabling regenerative braking and causing the motor to cut out; subsequently the battery charging module was found to be failing, causing the high-voltage battery to drain to 0% and stall the vehicle. Both components were replaced by an authorized Stellantis dealership under warranty. Despite replacement of the PIM, the charging module, and ultimately the transmission, the defect has not been resolved. The vehicle has been confirmed defective by the authorized dealer on each visit and has been subject to a STAR (engineering escalation) case with Stellantis. Warning symptoms include the red turtle warning light, check engine light, and sudden power loss. The vehicle has been out of service for cumulative warranty repairs exceeding 130 days, including a continuous period exceeding 90 days. The vehicle remains unrepaired and in dealer custody as of the date of this filing. The dealer has confirmed the defect on each visit and has conducted multiple rounds of diagnostic testing and component replacement, none of which have restored safe and reliable operation. The component failures are available for inspection upon request.

While driving in suburban traffic vehicle engine began running rough and lost most power with about 58000 mi on the vehicle. Received check engine light and vehicle entered 'limp mode' with Turtle Icon displayed on screen. Brought to dealer and it was diagnosed with a P0304 Cylinder #4 Misfire and leaking head gasket causing coolant contamination to engine oil. Dealer repaired the head gasket under warranty. About 2 months after the head gasket was repair at 60,098 miles while drive on the Interstate the engine began running rough. Check Engine Light came on and then Oil Pressure Light came on. We were able to exit the highway, had the vehicle towed to the same dealer where the head gasket was repaired under warranty. This time the engine was diagnosed with a failed #4 Cylinder connecting rod. Chrysler and Dealer refused to repair or replace the engine even though both leak and failure occurred on same cylinder.

This submission supplements my prior NHTSA ODI complaint regarding the same vehicle and loss-of-motive-power condition. On Nov 8, 2025, the vehicle experienced a loss of propulsion at highway speed, creating an immediate safety risk. The vehicle could not maintain speed and required evasive action with no propulsion to avoid traffic hazards. Following the incident, the vehicle was inspected and stored diagnostic trouble codes P0A3F-00 and P0A43-00 were retrieved, relating to drive motor position sensor / resolver signal loss or degradation. These fault codes are associated with loss of propulsion and indicate a propulsion control signal-path fault, rather than a condition resolved by software calibration alone. The vehicle remains available for inspection and is out of service at a dealership due to unresolved safety concerns. Since my prior ODI complaint, I provided formal written notice to the manufacturer describing the incident, the retrieved fault codes, and the safety implications, and requested a written response. Receipt was confirmed by USPS certified mail on January 6, 2026. No written response was provided, and repeated attempts to contact the manufacturer through customer service channels were not returned. The manufacturer authorized only a recall firmware update and declined to authorize or perform the intermittent wiring and resolver diagnostics identified in its diagnostic procedures for these fault codes. The firmware update does not inspect, repair, or replace the resolver, wiring, or related hardware indicated by the stored codes, and does not determine whether the underlying propulsion fault has been corrected. As a result, the vehicle has been out of service for more than two months, and the risk of another loss-of-propulsion event remains unresolved. This update documents the manufacturer’s non-response after notice and reliance on a software-only remedy that does not address the indicated propulsion system fault.

WHILE DRIVING DOWN MAJOR HIGHWAY, THE POWER STEERING LIGHT WENT ON. IMMIDIATELY MY POWER STEERING SHUT OFF AND I COULD NOT TURN WHEEL AT ALL. HIGHWAY WAS 55 SPEED LIMIT AND I COULD NOT EVEN PULL OVER. HAD VAN TOWED TO DAYTON ANDREWS CHRYSLER DEALERSHIP FOR DIAGNOSIS AND THEY TOLD ME THAT THE POWER STEERING MECHANISM NEEDED TO BE REPLACED AND IT WAS GOING TO BE $4,500.00. THIS VAN HAS 14,400 MILES ON IT. AFTER LOOKING ON LINE IF OTHER PACIFICA OWNERS HAD THE SAME PROBLEM, IT SEEMED THIS IS A GLOBAL PROBLEM. I OBVIOUSLY CANNOT AFFORD TO FIX THIS ALMOST BRAND NEW VEHICLE AND THE SALESPERSON INDICATED THAT EVEN IF I DID WANT TO FIX THE PART IS ON BACKORDER AND THEY DON'T KNOW WHEN THEY COULD GET THEIR HANDS ON THE PART. THE FACT THAT THIS PART IS ON SUCH AN EXTREME BACKORDER TELLS ME THIS PART IS IN DEMAND BECAUSE MANY PEOPLE ARE HAVING THIS SAME ISSUE. PLEASE HELP ! i AM GOING TO CONTACT MY ATTORNEY TO SEE MY OPTIONS. THIS VEHICLE IS BASICALLY NEW AND FOR SAFETY REASONS, BEYOND ANY FAULT OF MY OWN, IS UNOPERABLE.

Transmission shifts very hard from 2nd to 3rd gear and 4th to 5th gear at random times and at random speeds. Sometimes it occurs in parking lots at less than 15mph and other times at highway speed above 65 mph while cruising. This has caused the engine and transmission mounts to fail prematurely. When it was taken to the dealership multiple times, the service department said they could not replicate the issue but opted to reset the computer anyways. This fixed it for about 2 weeks before the issues came back. A computer reset will wipe the transmission shift learning but with normal daily driving it comes back. This should not be considered "normal" or expected behavior.

The contact owns a 2020 Chrysler Pacifica. While the contact's wife was driving at an undisclosed speed, the engine seized in the middle of the road. The contact stated that there was no power to the vehicle. The contact stated that the failure occurred close to the residence, and there was not a lot of traffic. The driver was able to exit the vehicle and get to a safe area. The contact's brother-in-law was contacted for assistance; however, the driver became impatient waiting for assistance. The driver attempted to restart the vehicle, and the vehicle started. The help arrived, disconnected and reconnected the battery cables, and the vehicle was driven to the residence. The vehicle was not diagnosed or repaired by an independent mechanic or dealer; however, the dealer was made aware of the failure. The contact was informed that a recall was issued, but for Hybrid vehicles. In addition, the contact referenced an open investigation for the failure. The contact stated that the failure had occurred twice within two weeks. Additionally, the warning light that the “Auto START/STOP Unavailable” had remained illuminated since August 2025. The manufacturer was not made aware of the failure. The failure mileage was approximately 52,000. The VIN was unavailable.

The vehicle is unsafe to operate and presents an immediate highway safety risk. Shortly after purchase, the vehicle experienced multiple safety-related failures. Headlights were inoperable from the time of delivery, requiring use of high beams at night to see the roadway. This created visibility and traffic safety issues from day one. Within the first month of ownership, the vehicle required towing. The vehicle is a hybrid and could not be shifted into neutral, yet it was dragged with the wheels locked during towing rather than transported on a flatbed. This caused damage to multiple systems. Following the tow, all four tires developed visible bulges consistent with being dragged while immobilized, creating a significant risk of tire blowout at highway speeds. Steering and alignment became unstable, with grinding noises and loss of predictable control. The hybrid underbody shielding was also damaged, leaving components exposed. These conditions have persisted despite repeated notice to the seller and service administrator. A repair facility has confirmed the vehicle is not safe for long-distance or highway travel. The vehicle must regularly be driven at interstate speeds, and continued operation poses a serious risk of crash or injury. The vehicle remains in service only due to lack of alternatives, despite known safety defects affecting steering, lighting, and tires.

The windshield fogging up is insanely unsafe. Had to pull over multiple times in rain no matter what the setting are. Recirc, hi low hot cold. Nothing makes it better. I’ve read several complaints online with the same issue

I purchased this van in March 2025, it was used about 62000 miles, but dealer said it was in good condition, no issues. In September 2025, a battery light came on, that also activated the Start/Stop could not be used and needed service as well as Service Shifter. I brought the vehicle in and they simply replaced the auxiliary battery and sent me on my way. On November 13th, I was driving and a battery light came on as well as the Stop/Start not available error, and then moments later said "Stop Safely Vehicle will shut off soon". Thankfully I was only moments from home, and made it safely with my 5 children who were also in the van. Obviously this is dangerous as the vehicle stopping while driving can kill myself, my children, anyone in my vehicle, as well as cars around me as I live in a busy area, Tampa, FL. This car had just been given a review in March when put up for sale, and I had brought it in for an oil change, as well as a motor mount replacement, and the aux battery change, before this. My car has been serviced multiple times and this should have been checked or errors/updates reviewed. This auto/stop start seems to be a key in the safety issues as well since that light comes on every time there is an issue. Now the dealer states they are going to replace my PDC, main fuse box, and see if that fixes the error, but I have read that this is an error in many Chrysler Pacificas and mine is another.

Component/System: The propulsion system of my 2020 Chrysler Pacifica Hybrid, specifically a suspected internal transmission wiring-connector short—the exact hardware defect identified in Recall 23V-010 as capable of causing sudden loss of motive power. In my case, both propulsion sources (gas and electric) simultaneously ceased providing power, leaving the vehicle unable to accelerate. The vehicle, its transmission, and all hybrid-system components are available for inspection upon request. When inspected at the Chrysler dealership, technicians retrieved a diagnostic trouble code they acknowledged corresponds to the known wiring-connector short condition. This code was present before any recall procedures were performed. Safety Risk: I was traveling at highway speed with my family, the vehicle abruptly lost all motive power and began decelerating without my ability to maintain speed. I was forced to coast to the shoulder while surrounded by faster-moving traffic, exposing me and other motorists to the danger of a high-speed rear-end collision. Dealer Confirmation: The Chrysler dealer confirmed the presence of the wiring-connector-related fault code and agreed that it aligned with the recall defect pattern. However, they performed only the software update required under Recall 23V-010 and informed me that they would not undertake further inspection or physical diagnosis unless I paid out-of-pocket, despite the safety-critical nature of the failure. They are ignoring the fact that the physical underlying defect is not fixed by the software update, much to my frustration. With this unfixed, the car is not safe to drive IMO. Inspection: The vehicle has been inspected by an authorized Chrysler dealer. No additional parties have inspected it. The dealer did not examine or repair the wiring harness or connector itself, refusing my request to do so. Warnings/Symptoms: A hybrid/electrical-system warning message appeared moments before the shutdown. No prior symptoms

My 12v battery failed and damaged other system components. This is a description of the flaw from a mechanic that had the same problem: There is a major flaw in the Chrysler Pacifica Hybrid. The BPCM (high-voltage battery control unit) has no protection against high-voltage pulses on the 12-volt network. Moreover, the connection diagram of the high-voltage contactors does not contain any elements that could extinguish the counter-induction EMF pulses when the contactors are turned off. That is, when turned off, the contactors in the 12-volt network create high-voltage surges that can burn anything, any block that is connected to the 12-volt network. In my case, the power supply module of the high-voltage battery control unit BPCM was burned. The LG chem battery modules themselves were in perfect order during this malfunction. The circuit of this module is quite complex, the board is multilayered and it was difficult for me to repair it. I have a sloped driveway, and the failure led to my car starting to roll uncontrollably forward into my house. I was luckily able to stop it by throwing blocks under the tires while my wife held down the breaks. When I (or my wife) let go of the powerless vehicle's breaks, it would continue to roll as the power failure prevented the vehicle from either entering park or engaging the emergency break. We barely avoided significant property damage.

At low speeds while turning the wheel there is a severe shudder originating from the steering system resulting in a feeling of loss of control. Possible it’s happening at higher speeds and not as easily detectable. Countless users in online forums report the same exact problem with the solution from the dealer being that the rack and pinion system must be replaced. The volume of complaints seems like this is a defective part. This began when the car had under 30k miles but dealer would not fix under warranty as they “could not reproduce the problem”.

Engine Shutdowns randomly While driving and it almost caused me to crash once on the highway and the other was while in my neighborhood to take my daughter to school

I have a power problem and could not get my wheelchair ramp down. The manual said to push it manually. this would not work, and my wife and I were trapped in this vehicle where we could possibly burn to death. This is a Braun Ability modified vehicle.2 men tried to get it down and couldn't. We called the factory, and they said to pull a fuse at the battery. How can we do this if we are in wheelchairs and beside, we can't get the ramp down to get out.