- Início
- BMW
- 428i Gran Coupe 2015
- Problemas
2015 BMW 428i Gran Coupe problemas
78 proprietários relataram problemas com o 2015 BMW 428i Gran Coupe para a NHTSA, mais frequentemente sobre electrical system.
Relatado por donos à fonte abaixo. Não é um veredito sobre este carro: é o que as pessoas escreveram. 🇺🇸 Dado local
Relatórios mais recentes
40The moon roof glass while driving exploded unexpectedly.
The contact owns a 2015 BMW 428i. The contact stated that upon starting the vehicle in colder weather conditions, there was an abnormal clicking sound coming from under the hood. The contact stated that the failure posed a potential safety risk while commuting long distances. Upon further investigation, the contact associated the failure with BMW Lawsuit Case: 17-CV-07386. The manufacturer was notified of the failure by phone, and a case was filed. The failure mileage was approximately 77,000.
The contact owns a 2015 BMW 428I. The contact stated that while driving approximately 29 MPH, the vehicle started to overheat and experienced reduced power, and there was smoke coming from under the hood. The contact stated that there were unknown warning lights illuminated. The contact was able to drive to the residence. Additionally, while driving at 40 MPH, the failure recurred, and the vehicle stalled. The contact was able to pull over to the side of the road. The vehicle was towed to the residence. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not contacted. The failure mileage was unknown.
The contact owns a 2015 BMW 428I. The contact stated that while the vehicle was parked, while attempting to start the vehicle, it failed to start. The contact stated that the vehicle eventually started. The vehicle was taken to an independent mechanic, where it was diagnosed with coolant pump failure. The contact was informed that the coolant had been continuously running, causing the battery to completely drain. The contact was informed that the battery needed to be replaced, the radiator needed to be flushed, and the repair of a small oil leak was needed. The vehicle was repaired. The VIN was included in NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System). While driving to the dealer, the loss of communication with the coolant pump warning light illuminated. The contact was informed that the coolant pump had passed the inspection and did not need to be replaced. The contact was informed that the shield was installed as per the recall. The contact stated that upon retrieving the vehicle from the dealer, the battery was completely drained. The contact was informed that the battery needed to be replaced. The dealer was informed that the battery was replaced three weeks prior. The contact requested that the dealer replace the coolant pump according to the recall notification, however the request was denied. The manufacturer was not made aware of the failure. The failure mileage was approximately 130,000.
The contact owns a 2015 BMW 428I. The contact discovered that the water pump was continuously running after the vehicle was turned off. The contact referenced and associated the failure with NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the VIN was not included. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 118,357.
The contact owns a 2015 BMW 428I. The contact stated that while driving at an undisclosed speed, the coolant warning light intermittently illuminated on several occasions. The contact was informed that the VIN was included in NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The vehicle was taken to a dealer, where it was diagnosed that there was an electrical connector on the water pump that was exposed to water and that the water pump needed to be replaced. The contact stated that the manufacturer had removed the VIN from the recall. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was unknown.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System). The contact called the local dealer, who confirmed that recall parts were not yet available and advised the contact to wait for another notification to arrive when parts become available. The vehicle was not diagnosed or repaired. The manufacturer was not contacted about the issue. The contact had not experienced a failure.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that while driving 20 MPH, the check engine warning light illuminated, and the messages "Engine Overheated" and "Please Pull Over" were displayed on the instrument panel. The contact replaced the water pump and the thermostat; however, the failure persisted, and the vehicle was taken to an independent mechanic to be diagnosed and the contact was informed that the water pump had failed and needed to be replaced. The water pump and thermostat were replaced; however, the failure persisted, and the engine kept overheating. The vehicle was taken back to the independent mechanic. The water pump and thermostat were replaced. The independent mechanic checked the electrical system. However, no cause for the failure was found. The contact stated that the failure persisted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was unknown.
The contact owns a 2015 BMW 428i. The contact received notification of NHTSA Campaign Number: 24V608000(Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated while operating the vehicle, the contact noticed smoke coming from the engine compartment. An unknown local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was 63,000. VIN tool confirms parts not available.
Recall #24V-609. Recall was issued in October 2024. My wife drives this car....BMW has no update. Need it repaired ASAP! Please inquire. Thank you, [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact stated while driving at an undisclosed speed, the engine overheated and the vehicle started shaking with the drivetrain malfunction message displayed. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure but was unable to confirm when parts would become available. The failure mileage was approximately 93,000. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
A warning message comes on saying the front passenger air bag sensor is defective. I checked with the BMW dealership and with the used car company I bought the car and "bumper to bumper" warranty. The used car company confirmed the car has a bad sensor but I have to pay $1,100. BMW has had several recalls involving sensors in other models and even problems with the 2015 428i convertible. My car had less than 50,000 miles when the fault 1st popped up July 2024. I believe this should be recallled.
The manufacturer has failed or is unable to remedy this safety recall for my vehicle in a timely manner. Issue: 1 open recall since Aug 13, 2024 for: ENGINE COOLANT PUMP: The electrical connector of the engine coolant pump could become damaged. Small drops of liquid from the positive crankcase ventilation (PCV) system could drip down onto the electrical connector of the pump.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated while driving approximately 30-40 MPH, there was smoke coming from underneath the hood of the vehicle. The dealer was not contacted. The manufacturer was made aware of the issue. The failure mileage was 151,940. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated while driving at an undisclosed speed, there was smoke coming from the engine compartment into the cabin of the vehicle. The cause of the failure was not determined, and the vehicle was not yet repaired. The failure mileage was 60,000. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact stated while driving at approximately 15-20 MPH, the message “Do not Drive” was displayed. The vehicle sat overnight; however, upon starting the vehicle the next day, the messages “Do not Drive” and “Add Coolant” were displayed. There were no visible leaks found. The contact added additional BMW coolant. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact scheduled an appointment with the dealer. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The approximate failure mileage was 138,000. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The contact stated while driving at undisclosed speeds, smoke was coming from under the hood, entering the vehicle through the A/C vents. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 84,000. VIN tool confirms parts not available.
Turbo lines leaking. My model vehicle is the same N20 engine components that were installed with the f30s in prior years. BMW had an in house recall for specific models and vins but did not include mine even though they were installed with the same issues that the previous models had. Now, the turbo lines are leaking, my car only has 85000. I shouldn’t have to pay over 3k for them to correct this.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine an Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, there was white smoke coming from under the hood. No warning light was illuminated. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 61,000. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact was notified of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that an abnormal oil burning odor was coming from the vehicle. The check engine warning light became illuminated. The vehicle was taken to an independent mechanic, and it was discovered that there was oil leaking from the gasket and onto the bank 1 sensor, which caused the sensor to become corroded. The mechanic linked the failure to the recall. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The vehicle was taken to a dealer and the contact was provided an estimate for a diagnostic test. The contact stated that the vehicle was not repaired, and the engine was overheating. The failure mileage was approximately 84,000. VIN tool confirms parts not available.
The contact's daughter owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2014 BMW 428I. The contact stated while driving at an undisclosed speed, the contact noticed a smoky odor coming from the vehicle and the contact noticed smoke coming from the engine compartment. The contact pulled the vehicle over and turned the vehicle off. The vehicle was able to restart. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The approximate failure mileage was 70,000. VIN tool confirms parts not available.
N/A
The water pump electrical connector on my 2015 BMW 428i failed, as identified in Recall Campaign No. 24V-608. This defect caused repeated engine overheating, leading to damage to the oil pan gasket and valve cover gaskets. An independent service center confirmed the damage was due to overheating from the faulty water pump. The issue has worsened, with a visible oil leak contributing to frequent engine overheating, making it unsafe to drive long distances. Contact Timeline: 1.October 10, 2024: I received the recall notice from BMW for the defective water pump electrical connector. 2.October 24, 2024: I emailed BMW [XXX] and [XXX] ) to report the overheating and related damage, requesting a full inspection and repairs. 3.October 2024: I visited an independent body shop, which confirmed the damage, and later the BMW dealership in Pompano Beach, which also confirmed the issues but did not agree to cover the repairs under the recall. 4.November 8, 2024: BMW Recall Support Services confirmed the recall is open but did not address the additional damage. 5.November 11, 2024: Robert Pfeiffer from BMW left a voicemail, only noting a delay in parts but not addressing my concerns about the damage. 6.November 12, 2024: I called Robert Pfeiffer but was unable to reach him and left a voicemail. I followed up with an email, reiterating my request for BMW to cover the related repairs due to the worsening vehicle condition. Current Concern: The oil leak continues to worsen, increasing engine overheating risk. No warning lamps initially appeared, but symptoms began shortly after the recall notice. Both the independent body shop and the BMW dealership confirmed the overheating and gasket damage. I request NHTSA’s assistance, as BMW has not resolved the issue despite the clear link to the defective part. The vehicle is available for inspection, and this problem presents a serious safety risk. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Water accumulation in the rear passenger side when it rains. Can hear slushing water when driving. It accumulated all the way to the luggage compartment and caused the Control unit rear electrical and the ASD module to fail causing $2564.61 in repairs. Was wondering if this is the case of the issue [XXX] . When I read online there Is a lot of complaints about this. Has BMW ever acknowledged the issue? [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
I had a flat the other day and had it replaced as they were inspecting my cars they noticed my other tire was bald. Both of these are Pirelli P7 all season and I had just bought this tire in June of 2023 and driven around 10,000 miles. Its almost totally bald after 10k miles which is crazy. Its raining and my car is not gripping on the road. My other tire blew because of this. I called and they told me there no rating for my tire and they can't replace it. They just put my life at risk because they gave me a crappy tire and they wont even replace the bald one? I could have crashed and been hurt or someone else hurt. Has not been inspected except for the tire company who installs them.
There is a ebrake bracket made of plastic underneath the car but that sits above the drive train running from the front to the back parallel to the drivetrain. It's not protected by a heat shield and is only made of thin plastic. My has been replaced three times already and is already needing to be fixed again on a car with only 76k miles. The high temperatures from the exhaust melt the plastic and cause the cable to fall on to the drivetrain. It's only the matter of time before it gets caught in the drivetrain or wraps around causes an accident and serious bodily injury. I am shocked to see this is not recalled already to be replaced with a metal bracket. Mfg Part # 34406854898 34-40-6-854-898 34 40 6 854 898 34.40.6.854.898
The plastic clip supporting the emergency brake line clip failed resulting in the emergency brake line guide resting on the drive shaft. This could cause a complete failure of the emergency brake. Replacing the clip requires removal of the gas tank, exhaust and heat shield to access the clip. A BMW dealer shop did the expensive repair ($3345) and told me it was common. I’ve read that the clip may have been redesigned. I believe this part should be properly designed and replaced in impacted cars and that the cost of the repair should be on BMW and not the consumer. The emergency brake/parking brake needs to be a reliable functioning part of the car to protect the safety of people in and around the vehicle. I do not have the broken clip for inspection, however, I attached photos. I realized I had a problem from the intermittent noise made from the emergency brake guide resting on the drive shaft. The vehicle inspection at the dealership identified the problem. A video of the inspection was made at the dealership. I attempted without success to gain some reimbursement and find out about the clip redesign from BMW USA.
Parking brake cable retainer clip that extends above the driveshaft all the way to the rear wheels has broken and now cable scrapes against drive shaft causing a loud unpleasant concerning grinding noise when accelerating. The dealer were I service my vehicle is aware of issue, the part is a very inexpensive part, ranging from $12 to $50 depending ware you purchase but the dealer wants to charge $900 dollars to replace. This repair should be placed on the recall list due to the difficulty in replacing the clip, due to possibly having to remove the gas tank and drive shaft to get to the clip.
I saw a similar NHTSA report for this car, so I will just repeat it here: <start of similar NHTSA REPORT>--------------------------------------------------------------------------------------------- NHTSA ID Number: 11440588 The door locks have become ‘sticky’. This means that when pulling on the interior door release handle, the lock is moving to a stuck position that is not permitting egress. While the solution of pushing the central unlock button is currently viable, it would not work in a total electrical failure, or a situation of a vehicle submersion in water. This is a dangerous situation, potentially leading to passenger entrapment if the motors or lock mechanism fail. <end of similar NHTSA REPORT>--------------------------------------------------------------------------------------------- Back to me: I have owned the car for roughly 2 years. The car has 72,000 miles on it. At first the problem was intermittent - less than 5% of the time. Recently, it is up to over 50% of time. A quick look at the BMW message boards shows that this is a widespread problem. There should be a recall on this extremely dangerous defect.
Perguntas
- O que os proprietários mais relatam sobre o 2015 BMW 428i Gran Coupe?
- Mais reportado: electrical system, em 78 reclamações de proprietários registradas na NHTSA.
- Quantos relatos de proprietários mencionam um acidente ou um incêndio?
- Dos 40 relatórios mais recentes, um acidente é mencionado em 0 e um incêndio em 0. Estas são as reclamações dos proprietários, não conclusões confirmadas.
Você possui um 2015 428i Gran Coupe?
Publique-o gratuitamente e alcance compradores que já estão interessados neste carro exato.
- Gratuito, sem comissão
- Cerca de três minutos
- Seu anúncio aparece nesta página